305 products found for "mpx_65154_angebot"

rc-car-online - Home

65154 Multiplex Servo Rhino pro SHV digi 4 Angebot

The RHINO pro SHV digi 4 servo is a 29 mm digital servo designed for use in large-scale models. The new pro SHV servo is faster, more powerful, and more durable than the proven RHINO digi 4, of which thousands are now in use. More performance, with higher torque and faster transit speed, and more durable with a new triple-ballraced heavy-duty steel gear set. The operating voltage range has been expanded to 7.4 V, allowing the servo to be operated directly with up to two-cell LiPo batteries.Large 1 : 5 scale model cars make very exacting demands on the servos, and for many years the RHINO servo has set the standard with its extremely robust, outsize metal gearbox and 8 mm output shaft for the output device. An integral aluminium heat-sink cools the motor and electronics very effectively. Servo case gaskets make the unit dust-proof and splash-proof. The enormous power and robust nature of this servo also make it an excellent choice for large models generally, such as F3A - XXL large-scale model aircraft, as well as for non-standard applications.Adapter FG # 6118/02 is required for installation into a FG/Smartech car.High-voltage (HV) servosHV servos have a broad operating voltage range of 5 - 7.4 V, i.e. they can be operated directly with two-cell Lithium-based rechargeable batteries (e.g. LiPo, LiFe, LiIo). The outstanding features of LiXX batteries compared with NiXX types are their higher energy density and lower self-discharge rate, and for these reasons they are increasingly used as power supplies in model RC systems. The higher voltage of LiXX batteries means that the current drawn by an HV servo is lower for a given output power than that of conventional servos, which are generally designed for a nominal voltage of 4.8 - 6 V. When used with 2S LiXX batteries, these older servos must therefore be operated with a separate voltage reducer. This reduces the overall efficiency of the system, leads to unnecessary dissipated power, requires additional electronic complexity and more connectors ( higher costs, greater failure risk, higher weight). Modern receivers (e.g. M-LINK) are designed for voltages up to 9 V, i.e. with HV there is no longer any reason not to use the modern, superior LiXX battery technology.The following servo parameters can be adjusted using the MULTImate test and programming unit # 8 2094:Direction of servo rotationServo transit speedServo travel, left / right (max. 2 x 90°)Servo centreServo deadbandFail-safe (On with servo Fail-Safe position / Off)Reset to factory default settingsSpecificationDimensions (L x W x H):Weight::Gearbox:Ballraces:Multi-finger wiper pot:Torque @ 6 V / 7f.4 V*:Holding power @ 6 V / 7.4 V*:Transit speed for 40°@ 6 V / 7.4 V*: 59 x 29 x 55 mm172 gSteel3yes (with indirect drive)230 / 270 Ncm280 / 320 Ncm** 0,10 / 0,08 sec.* 5-cell NiXX / 2S LiPo operation. Values measured at stabilised 6.0 V / 7.4 V.** Holding power at angular error

€119.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TT1530/260 Top Tuning 6000 mAh LiPo receiver battery 2S, 7,4V 5C Angebot

Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CSpezification:Tension: 2S / 7,4VCapacity mAh: 6000Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 142 mmWidth +/- 1,5 mm: 44 mmHeight: +/- 1,5 mm: 18 mmWeight +/- 10g: 243 mmCont. current: 5C (30A)Connectors: Universal and EC3, XH-balancer. Battery color may vary!Contents:1 piece

€59.90* €69.90* (14.31% saved)

Configure now

86449 HPI Kolbenstange 6 x 115 mm

Genuine HPI spare/option part. Fits #87562 VVC/HD shocks. Content:2 pieces

€27.90*

1097/01 FG Flanged bushing

Genuine FG spare/option part.Dimensions:6 x 8 x 7,5 mmContents:6 pieces

€5.30*

67370/05 FG Flanged bushing

Genuine FG spare/option part.Content:2 pieces

€10.90*

540016, Bearing flange, engine, r/h

R/h bearing block for middle layshaft.

€29.80*

15425 HPI Flanged Cap Head Screw M5 x 22 mm

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content: 2 pieces

€5.48*

y0750/05 Case set for Orange-Power servo

Complete case set for Orange-Power servo with o-rings and screws included.

€24.90*

10457 FG Clutch flange bearing - set

Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.

€118.95*

7288 FG cask-shaped spring orange

Genuine FG spare/option part. These cask-shaped shock springs are suitable for the shocks from the EVO 2020 and other shocks with an outer body diameter of 20 mm.Wire diameter. 2.4 mmContents:2 pieces

€22.50*

10653 FG Alloy gear flange-engine F1

Genuine FG spare/option part. Contents:1 piece

€72.60*

540017, Bearing flange, engine, l/h

L/h bearing block for middle layshaft.

€34.10*

2006/03 FG Flanged sleeve - 2pcs.

Suitable for Collari master cylinder ().Inner diameter 2,8 mmOuter diameter 5,9 mmLength 4,1 mmFlange diameter 8 mmFlange thickness 1 mm

€10.90*

Z684 HPI Nylock nut M4 with flanged

Genuine HPI spare/option part. Part is delivered in silver or black color from vendor!Content:4 pieces

€4.38*

10456/02 FG Gear box flange for quick fix system F1

Genuine FG spare/option part. Spare part for 10456.Content:1 piece

€79.70*

2012-43 Mecatech Flanged Screw M3x6

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

02.03.01 OSKART Flange bearing mount

Genuine OSKART spare/option part.Fits 1/2 scale OSKART.Contents:1 piece

€27.00*

10457/01 FG Clutch flanged bearing - 1pce.

Spare part for .

€98.80*

2012-103 Mecatech Engine Mounting Flange

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€57.50*

Tamiya spray paint PS-7 orange

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

€9.79*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TT1001/02 Top Tuning Flanged plastic bushing 6 x 7 x 10

Genuine Top Tuning spare/option part.Spare bushings for the inner side of front and rear Top Tuning 5ive-B aluminum a-arms TT1001/TT1002.Contents:4 pieces

€3.90*

32466 Bearing flange front - 1pce.

€9.90*

105612 HPI 24mm HD Front Hex Hub grey/orange Baja 5SC

hpi_105612 Color: Orange

Genuine HPI spare/option part. For HPI Baja 5SC, fits too for HPI Baja 5B, 5B 2.0 and 5T(GUNMETAL/2pcs) These 24mm HD front hex hubs replace the stock hubs on HPI Baja 5B and 5T vehicles for extra durability. First introduced on the Baja 5SC truck, these heavy duty front hubs use a screw & nut design that eliminates the previous use of an e-clip. They're precision machined from billet aluminum for a perfect fit and gunmetal anodized for custom looks.Color: gunmetal.Contents:2 pieces

€39.00*

y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.

Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*

305 products found for "mpx_65154_angebot"

Filter products

rc-car-online - Home