372 products found for "kpower_dm4000"

Catalogue #1

DM4000/04 gears and bearings set for K-Power

Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:4 x metal gears1 x 15T spline output shaft2 x ball bearing (1 bearing installed in output shaft)3 x steel pin

€39.90*

DM4000/02 servo arms, rubber grommets and guide sleeves for K-Power

Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:1 x 4-sided servo arm 60 mm1 x single-sided servo arm 55 mm1 x servo disk 40 mm4 x Mounting screw4 x Rubber grommet4 x Guide sleeve

€17.90*

DM4000/03 case set with screws and o-rings for K-Power

Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:1 x case top 1 x case middle section1 x case bottom6 x long screws for case top6 x short screws for case bottom2 x large o-ring 1 x small o-ring

€19.90*

DM4000/01 Alloy servo arm for K-Power, Losi, Savöx, Spektrum, Rhino, Hitec and many more

Genuine K-Power spare/option part.One-piece aluminum servo arm, 67 mm long and 3 mm thick, with 10 linkage hole tapped for M3 screws.Suitable for all servos with an output shaft with 15 tooth spline shaft, for example:K-Power DM4000Multiplex RhinoHitec 805Savöx SV-0236MGSpektrum S9010 and S9020LOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)and many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servo arms are indispensable by strong digital servos, as used on large scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€9.95*

DM4000/05 Servo motor and electronics, with cable for K-Power

Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:1 set

€49.90*

7403/03 FG Connecting tube and cable ties - set

Spare part for .Dimensions of the tube:ID 12 mm x L 8.5 mm

€5.60*

67299 FG Steel-Power Tuning pipe Leopard/Sportsline 4WD

Genuine FG spare/option part. Spare part for FG Leopard 4WD 2010. Fits for FG Sportsline 4WD 510/530.FG fuel tank #8383 along with tank mount #69238/01 is required for installation on a Leopard 4WD Sportsline. The receiver battery must be relocated as well.Mielke #5062 is required for installation of this pipe.Contents:1 set

€349.95*

5185/01 Mielke Manifold for 5185 Big Power

Genuine Mielke spare/option part.Steel manifold, fit Mielke Big Power with the order number 5185. Contents:1 piece

€29.90*

5194 Mielke Cross-Power Mounting set

Mounting set for Cross-Power tuned pipe for Smartech UNO and Carson Attack

€24.90*

586 Alloy servo arm for Digital Power Servo no. S8203, 1 pce.

smartech_586 Version: 58610 Single-sided

Alloy servo arms are a must for strong digital servos, as used in large scale models.This aluminum servo horn fits servos before June 2013 with 5,75 mm 25-spline output shaft.For servos from June 2013 and up with a 8.75 mm 17-spline output shaft please use aluminum servo horn y0750/01, y0750/02.Four different aluminum servo arms are available for the digital power servo No. S5803 and the Smartech servo no. 301502. The slotted aluminum servo horns provide a gentle clamping on the servo's output shaft (using a 2.0 mm Allen wrench).

€7.90*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

This product is currently not available.

FG 7403/06 Aluminium pipe tube rear attachment for Big Power Pipe.

1 piece Original FG article 7403/06 The attachment is for the Big Power resonance tube on the the rear body mount of FG models. Rarity!

€25.00*

6299 FG Steel-Power 1:6 Tuning pipe FG 2WD and 4WD Off-Road

Genuine FG spare/option part. Newly developed tuned pipe made of strong steel sheet, with plug connecting system. The pipe mounts close to the car for best protection possible and versatile usability. Suitable for:FG 2WD and 4WD 1:6 Off-RoadSmartech 2WD off-road And for many other brand's 1/6 carsNot suitable for:FG Leopard2 2+4 WD Sportsline and CompetitionOn several pictures the pipe is shown with a silicone tube tailpipe extension, which is not included. It can be ordered separately as an accessory with part number 6299/03 or y0995.Content:1 piece

€249.95*

y1352 Powerbase 13.8 V/20 A power supply

Ideal power supply for tire warmers! The Powerbase power supply delivers with 13.8 volts the ideal and constant current for tire warmers. A 45 mm cooling fan on the back keeps the Powerbase power supply running cool. Including a slow 4 A / 250v fuse for overload protection. Specifications: Input voltage: 190 - 240 Volts AC Output voltage: 13.8 volts regulated DCOutput connector: 4 mm plug / alligator clips For additional information pleas go to the Technical data tab. Tire warmers can be found under part numbers y1351/01 and y1351/02 or save with the complete set part number y1351/03.Contents:1 piece

€69.90*

This product is currently not available.

5188 Mielke HOT - Power tuned pipe exhaust system losi 5T/2.0 and Mini

Genuine Mielke spare/option part.The HOT-Power tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi 5ive-T and Losi 5ive-Mini in combination with large displacement and modified engines.The elaborate, angled design in combination with the long tail pipe, makes best use of the available space in the 5ive-T and Mini, allowing for optimum performance!The outlet at the rear contributes significantly to a scale look when driving the car!When designing the system, it was especially important to maximize the distance to the battery box of the Mini / 5ive-T in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box.The tuned pipe is made of aluminum, which keeps both weight and center of gravity low.The set also includes the complete installation hardware!Contents:1 set

€249.00*

y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, set

Item N° y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, setFits Orange Power and S8203 servos.It is also absolutely mandatory to use the rubber grommets along with the brass bushing inserts for installation.Content:Rubber grommets: 4 pcs.Brass insert: 4 pcs.

€5.90*

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

5100 Mielke Sidepower tuned pipe system for Carson Wild GP Attack and HPI Baja 5B / 5T

mielke_5100 Manifold: 5100 with Alloy Manifold

Genuine Mielke spare/option part. Complete exhaust system for Carson Wild GP Attack, HPI Baja 5B and 5T, with steel manifold and mounting hardware included.The pipe is mounted well protected bythe chassis. The lightweight pipe keeps the c.o.g. low.Contents:1 Set

€169.90*