Genuine Futaba spare/option part. This Futaba R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price.However, the two receives differ in two fundamental areas: this R304SB-E is only intended for electric vehicles, the R304SB is electric/nitro/gas, and this R304SB-E features the benefit of having a non-exposed built-in antenna - the R304SB is fully exposed.Features:T-FHSS SystemTelemetry Enabled4-ChannelsBuilt-in Hidden AntennaElectric Vehicle Use OnlySpecifications: Futaba System: T-FHSS S.Bus2: Yes Channels: 4 Range: 70m (230ft) (at best conditions) Power Requirement Rated Voltage: 4.8-7.4V Usable Voltage: 3.5-8.4V Size: 1.38x0.91x0.33" (35.1x23.2x12.5mm) Weight: 0.23oz (6.7g) Contents:1 piece
Genuine Futaba spare/option part. The Futaba R324SBS is a compact and lightweight T-FHSS SR 2.4 GHz receiver with integrated telemetry function and diversity antenna. The transmission mode T-FHSS SR is currently the fastest transmission technology on the market!S. BUS2 sensors can be connected via the S. BUS2 connection and up to 32 telemetry data sets can be transmitted. The telemetry transmitter integrated in the receiver transmits the telemetry data on the S. BUS2 connection to the transmitter, which displays, announces or outputs them acoustically.The receiver is particularly suitable for use in RC cars and boats.NOTE: When using 7.4 V LiPo batteries as a receiver battery, the connected servos must also be designed for this voltage. The receiver does not have an internal voltage regulator for the servo voltage!Features: 4-channel T-FHSS SR 2.4 GHz telemetry receiver with S. BUS2fastest transmission system T-FHSS SRdiversity antenna for optimal receptiongold-plated contactstelemetry function with 32 channelsS.BUS2OutputHi-voltagesuitable for RC-cars & boatsTechnical data: frequency: 2.4 GHztransmission system: Futaba T-FHSSnumber of channels: 4telemetry capable: Yesserial connection (S-BUS, sum signal...) yesinput voltage: 3.7 - 8.4 voltconnector system: Futabalength approx: 35.1 mmwidth approx: 23.2 mmheight approx: 12.5 mmweight approx: 8.3 gContents:1 piece
Genuine FG spare/option part. Charger 220/230V for receiver (Futaba and Hitec) and transmitter (Futaba, BEC, JR-Graupner and T-connector). Charge control over LEDs. Suitable for the Hitec Radio Control System.Images may differ from the original.Charging currents:Transmitter: 180 mAPower pack: 250 mAContents:1 piece
Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece
New developed alum. servo arm in high-strength material with M3 threaded holes for the assembly of the throttle pivot posts 06534/02 and 06534/03. The fitted transverse slot makes the mounting of the servo arm on the servo toothing much easier.Measures:Total length: 53 mmWidth: 10 mmThickness: 3,1 mmThread: 3 mm
Genuine TT spare/option part.Spare part for Killswitch TopTuning 0990 or Dynamite 1240. Also suitable for other projects at your own discretion.2-pole connection cable with silicone insulation and 22 AWG/0.32 mm² cross-section, length approx. 80 mm.Contents:1 piece
With the Futaba R404SBS, Futaba offers the fastest and most compact receiver for RC cars and boats on the market today! The R404SBS has the ultra-fast signal transmission F-4G (10 channels with telemetry at maximum transmission speed). This makes the model's response even more direct while maintaining maximum transmission reliability!The new F-4G (Futaba 4th Generation System) transmission mode supports the familiar SR mode and has an even higher transmission speed than the previous T-FHSS SR. At the same time, the size of the new F-4G receivers R404SBS / R404SBS-E could be reduced again. To make this possible, the R404SBS-E has a large, upward-pointing antenna to optimize signal reception. Due to the chosen design, the footprint of the receiver remains unchanged.To take full advantage of the speed of Futaba's F-4G SR technology, there are numerous FUTABA SV servos that can also be converted to SR mode. The following servos are currently SR compatible: BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SVi, BLS373SV, S9372SV, S9373SV, HPS CB700, HPS CT700, HPS CB500, HPS CT500.The R404SBS has antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it in a flash. The R404SBS has the second antenna in the housing.S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter. This allows the measured values to be displayed or acoustically output at the transmitter.ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV! Technical specifications Transmission type: F-4G Frequency range: 2.4 GHz Channels: 4 PWM / 10 S.BUS Transmission power: 100 mW EIRP S.BUS Port: S.BUS2 Voltage range: 3.7-8.4V Dimensions: 25.5 x 20 x 10.6mm Weight: 5.7g Features 4/10 channel F-4G receiver 10 channels of telemetry at maximum transmission speed SR mode compatible Telemetry with S.BUS2 Telemetry with 32 channels S.BUS2 port Hi-Voltage (HV) Antenna diversity
Genuine Futaba spare/option part.Voltage sensor for Futaba S.BUS2. telemetry system.Suitable for use with the Futaba 4PX, 7PX transmitter.Technical data:Range: EXT line Voltage: 0.0V ~ 100.0V / Normal line Voltage: 3.5V ~ 8.4V (It measures to the first decimal place)Length: 870mmWeight: 6.0gVoltage: DC 3.7 ~ 7.4VContents:1 piece
Genuine Futaba spare/option part. The R334SB-E was produced by Futaba specifically for electric RC cars. The compact form, built-in aerial and short external aerial allow it to be tucked away under a body shell for a clean and professional installation without any sacrifice to the performance. You can use the R334SB-E in 'T-FHSS' mode, the faster 'T-FHSS High Speed' mode or even the ultra-responsive 'T-FHSS SR' Super Response mode making it versatile for racers and sport drivers alike. The HV (High Voltage) capability allows you to power it from a wide range of sources (3.7 to 7.4V) so you can extract the best performance from your servos without complex wiring.b>u>Features: /u>/b>ul>li>4-channel T-FHSS SR 2.4 GHz telemetry receiver with S. BUS2/li>li>fastest transmission system T-FHSS SR/li>li>diversity antenna for optimal reception/li>li>gold-plated contacts/li>li>telemetry function with 32 channels/li>li>S.BUS2Output/li>li>Hi-voltage/li>li>suitable for RC-cars & boats/li>/ul>b>u>Technical data: /u>/b>ul>li>frequency: 2.4 GHz/li>li>transmission system: Futaba T-FHSS/li>li>number of channels: 4/li>li>telemetry capable: Yes/li>li>serial connection (S-BUS, sum signal...) yes/li>li>input voltage: 3.7 - 8.4 volt/li>li>connector system: Futaba/li>li>length approx: 35.1 mm/li>li>width approx: 23.2 mm/li>li>height approx: 12.5 mm/li>li>weight approx: 8.3 g/li>/ul>b>u>Contents:/u>/b>ul>li>1 piece/li>/ul>
Genuine Futaba spare/option part.Temperature sensor for Futaba S.BUS2. telemetry system.Suitable for use with the Futaba 4PX and 7PX transmitter.Technical data:Range: 0°C~ 200°C (32 °F~ 392 °F)Length: 350 mm (13.8 in.)Weight: 3.8 g (0.134 oz.)Voltage: DC 3.7V ~ 7.4VContents:1 piece
Genuine Futaba spare/option part.Temperature sensor for Futaba S.BUS2. telemetry system.Suitable for use with the Futaba 4PX and 7PX transmitter.Technical data:Range: 0°C~ 125°C (32 °F~ 257 °F)Length: 350 mm (13.8 in.)Weight: 3.8 g (0.134 oz.)Voltage: DC 3.7V ~ 7.4VContents:1 piece
Description :Practical plastic transmitter case with zip fastener. Ideal for safe transport of the remote control transmitter and for protected storage at home. The inside of the case is padded with foam. The transmitter is additionally secured against slipping by a strap in the case. The outside of the case features white logo prints. The protective bag for the transmitter and the shoulder strap complete the scope of delivery.
Thanks to the variable compartment dividers with Velcro fastener, the case fits both desk transmitters (FX32 / FX36) and handheld transmitters (T18SZ / T32MZ) or car transmitters (T7PX / T10PX). Technical data
External dimensions: 390 x 275 x 200 mm
Internal dimensions: 375 x 250 x 160 mm Features
Plastic transmitter case
Hinged lid with zip fastener
Inner part padded with foam
Suitable for all FUTABA transmitters
Separate protective bag
Hanging strap
Scope of delivery
Plastic transmitter case
Separate protective bag
Hanging strap
Translated with DeepL.com (free version)
Genuine HT spare/option part.JR/Futaba/Universal female to female extension, Length approx. 10 cm.Useful for wiring of the receiver inside the UFRC GX1 RX-box or similar applications. Contents:1 piece
A small, lightweight electronic module which is connected between the receiver and one servo of your AM or FM radio control system. If the radio control system should fail, the receiver suffer interference, or the voltage of the receiver battery fall to a dangerous level, the servo connected to the unit moves to a pre-selected position, e.g. full brake, and thereby prevents motor damage through over-revving.