20 products found for "fg_66271"

rc-car-online - Home

66271, FG Ball bearing 17x26x7, 2 pcs.

€18.60*

6271 Alloy chassis for Leopard Race until 2009 - 1pce.

6271 Alloy chassis for Leopard Race -1pce.This chassis will fit for the Leopard Race until 2009Thickness: 4 mmLenght: 600 mm

€143.70*

66271/06 FG ball bearing 17x26x7 sealed, 2 pcs.

Genuine FG spare/option part.

€14.90*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

66291 FG Alloy shock absorber 08 long, 5 mm - 2 pcs.

Oil-pressure shock absorber Ø20mm, long version, upper damper mount 5mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€64.90*

Details

66201 FG Alum.chassis for WB 535 electro models, 1pce.

Genuine FG spare/option part.Fits electric powered WB 535 cars like Off-Road Buggy WB535 or Monster Hummer WB 535.

€150.95*

67271 FG Alloy chassis Leopard 2WD, 1pce.

Item N° 67271 Alloy chassis Leopard 2WD, 1pce.Spare part for the Leopard 2WD 2010 version

€116.95*

66221 FG Alloy tensioning pulley case, r/h 4WD

Genuine FG spare/option part. Contents:1 piece

€37.50*

66241, RX-box 4WD, 1 pce.

€14.90*

Details

68271 FG Mounting Nut for Front Axle 2WD/4WD, 2 pcs.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€7.50*

66261 FG Front stabilizer 5mm 4WD

Genuine FG spare/option part.Contents:1 set

€23.90*

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€6.90*

GPM 66275/01 Front cardan shaft for nearly all FG 4WD models

Fits all FG 4WD cars (except FG Leopard!) Lost drive shafts are a thing of the past! Universal drive shafts allow for higher drive angles than dog bones or ball drives. This makes them a better choice for for wheel-side applications on front axles, where the angles of the steering and suspension meet.GPM universals for ball drive can be disassembled and therefore repaired or rebuilded if necessary. The center pin (No.: < href="https://rc-car-online.de/en/products/gpm_66275_02-gpm-66275-02.html">66275/02) of the GPM universal joint is secured by a grub screw, which should be installed using a medium strength screw locking compound (66275/02).Therefore the joint can be easily rebuilded by replacing the center pin for cheap and will be good as new again.The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.

€58.00*

66270/02, FG Alloy steering arm for front upright, 2WD/4WD, 1 pce.

€45.90*

66275/05 FG Front cardan shaft 4WD

Genuine FG spare/option part.Contents:1 piece

€65.50*

GPM 66275/02 Axle pins for GPM cardan shaft

Genuine GPM spare/option part. Set of four axle pins and M3 x 8 mm grub screws. With 3 mm wide x 0.4 mm deep flat section.Dimensions:Diameter: approx. 2,97 mmLength: approx. 16,85 mmContents:1 set

€7.90*

66270/03, FG Plastic steering stop for 2WD/4WD, 2 pcs.

Genuine FG spare/option part. Measures:Length: 40mmDiameter: 10 mmFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€7.50*

66270/04 FG Plastic steering stop, shortened, 2pcs.

Item N° 66270/04 Plastic steering stop, shortened, 2pcs.

€5.50*

This product is no longer available.

66270/01, FG Alloy front upright (fits l/h + r/h), 2WD/4WD, 1 pce.

Genuine FG spare/option part.

€75.90*

GPM 66275 Universal drive shaft with ball drive conversion kit for most FG 4WD cars

FG Set price: 163,25 EURFits all FG 4WD cars (except FG Leopard/ TR-4!) Lost drive shafts are a thing of the past! Universal drive shafts allow for higher drive angles than dog bones or ball drives. This makes them a better choice for for wheel-side applications on front axles, where the angles of the steering and suspension meet.GPM universals for ball drive can be disassembled and therefore repaired or rebuilded if necessary. The center pin (No.: 66275/02)of the GPM universal joint is secured by a grub screw, which should be installed using a medium strength screw locking compound (y0114).Therefore the joint can be easily rebuilded by replacing the center pin for cheap and will be good as new again.The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM universal drive shaft set includes everything for the conversion of your FG 4WD.Set includes:Quantity:DescriptionPart number2 piecesUniversal drive shaftFG 662752 piecesDifferential ball drive cupGPM 6069/022 piecesDriveshaft booty10046 piecesSteel ballGPM 7080/022 piecesDrive shaft spacer springy1218

€159.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.