22 products found for "fg_6041"

Catalogue #1

6041 FG Steel layshaft 10 mm

Genuine FG spare/option part. For all FG models except Formula 1.Dimensions:Length: 103 mmDiameter: 10 mmImportant:When installed in a Carson / Smartech model the brake hub is fastened with a screw stomach.Content:1 piece

€21.90*

6041/06 FG Propeller shaft

Genuine FG spare/option part. Content:1 piece

€57.10*

6041/05 FG Competition layshaft, hardened

Genuine FG spare/option part. Competition gear shaft, hardened and ground.Suitable for all FG models except Formel 1 and FG 4WD.Dimensions:Length: 103 mmDiameter: 10 mmContents:1 piece

€57.10*

6061 FG Rear diff mount left

Genuine FG spare/option part.Contents:1 piece

€12.90*

6441 FG Filter oil for foam filter 50ml

Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

6049 FG Clutch bell

Standard clutch bell for all FG cars except Formula 1 sportsline.Dimensions:Bell deep: 20 mmBell diameter: 56 mmLength of the shaft: 38 mmDiameter of the shaft: 10 mm

€35.00*

This product is no longer available.

6046 FG Steel pinion 14 teeth

Genuine FG spare/option part. True running steel pinion for minimized wear. Application: Layshaft pinion on all FG monster cars, not for use on the clutchbell.Dimensions:Diameter: 25 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Contents:1 piece

€32.90*

6081 FG Steel ball Ø4mm 10x15 mm

Genuine FG spare/option part. Ball joint with 4mm bore suitable for all FG plastic ball-and-socket jointsContents:4 pieces

€13.10*

6040 FG Ceramic ball bearings 10x22x6 mm

Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the clutch bell.Contents:2 pieces

€23.90*

6048 FG Steel gearwheel big 48 teeth

Genuine FG spare/option part. Differential spur gear for all FG street cars except Formula 1. Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.Dimensions:Outer diameter: 75 mmWidth: 7.5 mmBore: 45 mmModule: m=1,5Contents:1 piece

€52.90*

6051 FG Dampening rubber

Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€8.90*

This product is currently not available.

6031 FG Roll cage, front loop

Genuine FG spare/option part. Front loop for roll cage, fits all FG off road cars except Leopard / Leopard race.Dimensions:Height 205 mmWidth 128 mmDiameter 10.6 mmContent:1 piece

€21.90*

6541 FG Shrinkable tubing 1m for receiver akku - 1pce.

Non-transparent black shrinkdown plastic tubing to shrink the receiver batteries. Superficial measure 70mm.

€3.90*

1041 FG Alloy engine brace Evo 04 - 08

Genuine FG spare/option part. Engine mount for Evo models to make the chassis a bit stiffer, and reduce vibrations. Suitable for CY / Zenoah G230/240/260/270 engines in the Evo 04 - Evo 08 chassis.Evo 07 and up plates already have the bolt pattern, for older versions two 4 mm holes must be drilled into the chassis plate. Mounting screws are included.On race tracks with less grip will give you this part more pressure to the front tire, so it is better to handle.On race tracks with good grip, the car will drive more directly into corners, because here you will have also more pressure on the front axle.Scope of delivery:1x Alloy enginge brace3x Tallow-drop screws 4x14 with torx2x Shim ring 4,3

€16.10*

6071 FG Alloy rear axle brace

Genuine FG spare/option part. Suitable for all FG models except Formula 1 and Evo. Mounting holes for 4 mm bolts.Contents:1 piece

€17.00*

7041 FG Plastic bush for brake caliper

Genuine FG spare/option part. Fits calipers 7040 and 7040/1.Dimensions:Inner diameter: 6,15 mmOuter diameter: 8 mmWidth: 5,8 mmFlange thickness: 1,1 mmContent:4 pieces

€3.30*

6047 FG Steel pinion small 15 teeth

Genuine FG spare/option part. True running steel pinion for minimized wear. Suitable for all FG cars.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Contents:1 piece

€31.90*

6011 FG Side guards left/right

Genuine FG spare/option part. Side guards suitable for Marder, Off-Road Buggy 2WD and 4WD body.Contents:2 pieces

€22.95*

6044 FG Brake disk

Genuine FG spare/option part. Brake discs for the old twin disc setup.Dimensions:Diameter: 36 mmSquare size: 15 mmContents:2 pieces

€21.50*

6741 FG Shim ring 6x12x0,5mm - 10pcs.

Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€3.90*

6141 FG Alloy plate front axle for all 1:5 models

Genuine FG spare/option part.Contents:1 piece

€12.90*

6021 Brake power adjustment screw

Genuine FG spare/option part. Dimensions:Head with recess: 5.3 mmDepth: 7 mmThread: M6x17 mmHead height: 8 mmContents:1 piece

€5.95*