1242 products found for "carson_crt4x4_used_weiterleitung"

Catalogue #1

HT-Steel pinion for Carson / Smartech 4WD cars

ritzel_gas_devil Size: y0344 - 40 teeth

Genuine HT spare/option part. Nitrited steel gears, fit Carson Gas Devil / Smartech Thunderbolt 4x4 only.These gears are available with 37T or 40T, both share the same diameter and must be used in combination.Please note: the gears cannot be used in combination with the stock gears and the 37T version is no replacement for the stock 37T gear!This gives you the following new gear ratios:I=10.58I=9.79 (when using two identical gears !)I=9.06The stock gear ratio is I=11.38 and I=8.42 is possible by switching the gears.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€44.90*

500405243 Carson Differential set

Genuine Carson spare/option part. Contents:1 set

€89.95*

500405231 Carson ESC Mount set

Genuine Carson spare/option part. Contents:1 set

€44.99*

500405235 Carson Bumper set

Genuine Carson spare/option part. Contents:1 set

€32.99*

500205470 Carson Tie rod ends

Genuine Carson spare/option part. Fits CY-Eline models.Contents:4 pieces

€7.90*

500405236 Carson Stabilizer set

Genuine Carson spare/option part. Contents:1 set

€34.99*

500205701 Carson Steering set left/right

Genuine Carson spare/option part. Fits CY-Eline models.Contents:2 pieces

€34.90*

This product is currently not available.

G004 Carson Sparkplug tool

Genuine Carson spare/option part. Contents:1 piece

€9.80*

HT-Alloy pinions for FG and Carson C5 / R5, 1 pce.

zahn_0003 Size: y19418 - 18/46 coated surface

Hard coated surface for wear protection.Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€29.90*

304032/10 Carson Wild GP Air Filter, set

Genuine Carson spare/option part. Set includet:- B091-97 Air filterContents:1 set

€49.90*

500405210 Carson Dog bone rear

Genuine Carson spare/option part. Contents:2 pieces

€39.95*

305212/s054068 RX-box Carson / Smartech 4x4

Genuine Carson spare/option part.

€11.40*

F001 Carson Battery 6V 2000mAh

Genuine Carson spare/option part. Contents:1 piece

€42.90*

500409061 Carson 1:8 Virus 4.1 4S BL 2.4G RTR

The CARSON Virus 4.1 Brushless is the innovative 4WD buggy with a race chassis optimized for off-road slopes and a powerful brushless drive. To protect the steering servo from moisture, the housing was sealed. The robust 3 mm aluminum chassis is extra narrow and has a chassis brace at the front and rear. Solid wishbones and all-round dirt deflectors ensure long-lasting driving pleasure. The 2100 kV HOBBYWING brushless motor provides the all-wheel drive with plenty of power and accelerates the 4.1 to over 80 km/h. Big bore aluminum oil pressure dampers, the low center of gravity and numerous setup options ensure perfect traction and allow the CARSON Virus 4.1 Brushless to fly over all distances.Ready-to-drive model with decorated body, waterproof brushless drive up to 4S LiPo, 2.4 GHz RC system + 9 kg metal gear servo, 2x7.4V/3000 mAh LiPo driving battery, transmitter batteries, LiPo Compact 2 charger with balancer, instructions. Technical details: 3 differentials Extra narrow 3mm aluminum chassis 2.4 GHz RC system including failsafe 100 A HOBBYWING brushless set 4S 9kg servo with metal gearsTechnical data: Scale 1:8 Length 500 mm Width 315 mm Height 220 mm Wheelbase 340 mm Ground clearance 35 mm Weight 3072 g 4WD drive ball bearings Speed up to 80 km/h

€329.90* €470.00* (29.81% saved)

This product is currently not available.

500205733 Carson Anti-roll-bar kit front/rear

Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 set

€37.90*

500405469 Carson Rear hub carrier

Genuine Carson spare/option part. Fits CY-Eline models.Contents:2 x Hub carrier2 x Axle

€39.90*

500405241 Carson Suspension mount set

Genuine Carson spare/option part. Contents:1 set

€59.95*

300001318 Carson Assembly wrench

Genuine Carson spare/option part. Contents:1 piece

€19.90*

500405209 Carson Gear housing

Genuine Carson spare/option part. Contents:1 piece

€37.99*

500205468 Carson Differential case

Genuine Carson spare/option part. Fits CY-Eline models.Contents:2 pieces

€21.90*

500205683 Carson Shock tower

Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€24.90*

Lauterbacher 3 jaw clutch adjustable for FG / Carson / HPI / Losi Modelle, used "3"

Lauterbacher clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€50.00*

y1246, Hobbythek/GPM Dirt-Cover line for FG, Carson/Smartech and Conrad cars, set

Regular price: 51,80 EURhe set is suitable for all FG models + Carson/Smartech/Reely (not for FG Leopard + Carson Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt), please use order no. y1247.Content of delivery:- y0514 GPM Shock-Cover für FG, Carson, Smartech, Conrad- GPM Air filter cover, no. BJAFCO- GPM Starter cover, no. BJPSCO y0514 GPM Shock-Cover für FG, Carson, Smartech, ConradThese protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks. Not for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all shocks with a spring diameter from 22 to 30 mm.Set of 4GPM Air filter cover, no. BJAFCOGPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.GPM Starter cover, no. BJPSCO Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

€39.50*

500405467 Carson Gear differential (front/rear)

Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€92.90*