Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y7087/02 Alloy shock shaft end long

Product information "y7087/02 Alloy shock shaft end long"

Genuine HT spare/option part.

Replaces FG 7087/02.

Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.

Dimensions:
  • Length overall: 27 mm, about 22 mm to to center of bushing
  • Thread for shock shaft: M4
  • Bushing inner diameter: 4 mm


Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y7087/12 Replacement bushings for alloy shock shaft end
Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces

€3.90*

Customers also bought

Average rating of 0 out of 5 stars

10466/01 FG Cover for FG inlet silencer - 1pce.
Spare part for and .

€25.90*

Average rating of 0 out of 5 stars

7432/22 FG Steel gearwheel hardened 22 teeth - 1pce.
Item N° 7432/22 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€26.90*

Average rating of 0 out of 5 stars

7432/23 FG Steel gearwheel hardened 23 teeth - 1pce.
Item N° 7432/23 Steel gearwheel hardened 23 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€33.90*

Average rating of 0 out of 5 stars

Mielke 5442 Power Gearshift clutch for FG Formula 1 Competition / RS5 TC/F1 / Harm Sx4 TC / Evo 2020, Mix, 2,3mm springs, short clutch carrier
The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models till version T13!Not for FG F1 Sportsline model!

€129.50*

Average rating of 0 out of 5 stars

7052 FG Plastic gear wheel 42 teeth - 1pce.
Gearwheel with 42 teeth for the layshaft. Diameter 66 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.50*

Average rating of 0 out of 5 stars

7429 FG Plastic gearwheel 41 teeth - 1pce.
Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€18.90*

Similar products

Average rating of 0 out of 5 stars

y04476/02 HT Alloy rear diff mount l/h+r/h one-piece-solid
Genuine HT spare/option part. Suitable for all FG 2WD and Smartech/Carson 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1. Content:2 piece

€99.90*

Average rating of 0 out of 5 stars

y04475 HT Rear alloy shock mount 2WD
Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

€89.90*

Average rating of 0 out of 5 stars

y0145 Alloy engine mount, small, for Carson C5 / R5 / Smartech Ranger / Reely onroad cars, 1 pce.
CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant.They come with all necessary hardware included.

€39.90*

Average rating of 0 out of 5 stars

6479 FG Rear alloy uprights 08
Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

€109.50*

Average rating of 0 out of 5 stars

y04474 HT Rear upper alloy wishbone 2WD
Genuine HT spare/option part.Rear upper alloy wishbone with droop stop. Replacement for plastic wishbone FG 6074/02.Will also fit the following Carson/Smartech cars:Onroad chassis C5, Attack, Super Attack, Gas Blaster and TouaregCarson Comanche, Attack Evo, CRT + CPT when installedwith 75 mm turnbuckle y0988Comes with 2 M8 low height nuts included. Contents:2 pieces

€69.90*

Average rating of 0 out of 5 stars

y04472/05 HT Rear lower alloy wishbone narrow
Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y19206 Alloy gear Plate for 2-Disc Brake
Alloy gear plate. Constant bearing distances even under high thermal conditions.Fits Marder/Beetle and Eco-line cars, will also fit Carson Streetmodel C5.You will need part number for installation.

€74.90*
%

Average rating of 0 out of 5 stars

s05502 alloy uprights, rear, for Carson/Smartech and FG models, 1 pair
Alloy rear uprights, with replaceable hinge pin bushings, with spacer tubes for the the ball bearings included.Fits FG and Carson/Smartech Attack, Attack Evo, Gas Blaster, Gas Devil, Super Attack, CRT, CRT 4x4, CPT, Uno, Monster Truck, Pick Up, Beetle and C5.One each lefthand and righthand version.Please note: for the installation of all popular disc brakes, we recommend: y6479

€49.90* €99.90* (50.05% saved)
%

Average rating of 0 out of 5 stars

306050, Carson alloy a-arms, rear upper, pair
Rear upper a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

€24.95* €49.90* (50% saved)

Average rating of 0 out of 5 stars

y0143 Alloy engine mount, large, for Carson C5 / R5 / Smartech ranger / Reely onroad cars, 1 pce.
CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

€49.90*

Average rating of 0 out of 5 stars

HT Aluminum rear suspension conversion kit for Smartech UNO, Carson Attack / Super Attack / Gas Blaster / C5 / R5, 2WD , y1003, set
Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

€299.90*
%

Average rating of 0 out of 5 stars

306049, Carson alloy a-arms, rear lower, pair
Rear lower a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

€39.95* €79.90* (50% saved)

Customers also viewed

Average rating of 0 out of 5 stars

500405232 Carson Chassis set
Genuine Carson spare/option part. Contents:1 set

€159.99*

Average rating of 0 out of 5 stars

y0976 Alloy shock shaft end, long or short to choice
y0976 Version: y7087/01 - Short
y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

5250 Mielke Air Booster carbon airbox
Genuine Mielke spare/option part.The Carbon Air Booster No. 5250 has been specially developed for the tough race use! The complete air filter weighs 138 grams with all attachments and aluminum adapter, the carbon part alone weighs 66 grams.Nevertheless, an extreme stability has been achieved through the bulges in the mold. Furthermore, the design ensures a straight air flow in conjunction with the new air ducts. When using these ducts, the fresh air from the cooling opening is pressed directly into the air booster, increasing engine performance or reducing temperatures.Contents:1 piece

€114.30*

Average rating of 0 out of 5 stars

66299 FG Aluminium volume compensator
Genuine FG spare/option part.Simple but very effective volume compensator, 100% sealing. Suitable for all FG aluminium shock absorbers 16mm and 20mm. Substitute for volume compensator 7088.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

FG FG main catalog, edition with 133 pages
Genuine FG spare/option part. Contents:1 piece

€8.70*

Average rating of 0 out of 5 stars

500405236 Carson Stabilizer set
Genuine Carson spare/option part. Contents:1 set

€34.99*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development