y1614 MadMax Monster LAND G-RIPPER 211x104 for HPI+Losi & Co. (24 mm hex)
Product number:
y1614.2
EAN:
4058575143291
Product information "y1614 MadMax Monster LAND G-RIPPER 211x104 for HPI+Losi & Co. (24 mm hex)"
MadMax Monster tire LAND G-RIPPER 211x104
Glued on rims with 24 mm hex drive and reinforcement ring, suitable for Losi/HPI/Arrma/Traxxas/Carson1/5 series cars
Dimensions:
Please note: Since the MadMax Monster LAND G-RIPPER tires give a very good grip, the rim and bonding are extremely stressed.
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Here you can find the other tire sets shown in the picture:
The off-road tire combination for extreme terrain use and "RC-car show use"!
Glued on rims with 24 mm hex drive and reinforcement ring, suitable for Losi/HPI/Arrma/Traxxas/Carson1/5 series cars
Dimensions:
- 211 mm outer diameter
- 104 mm width
- 875 grams weight
Please note: Since the MadMax Monster LAND G-RIPPER tires give a very good grip, the rim and bonding are extremely stressed.
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Here you can find the other tire sets shown in the picture:
Login
Customers also viewed
%
MadMax Monster tire LAND G-RIPPER 211x104 The off-road tire combination for extreme terrain use and "RC-car show use"! Glued on rims with 24 mm hex drive and reinforcement ring, suitable for Losi/HPI/Arrma/Traxxas/Carson1/5 series cars Dimensions: 211 mm outer diameter 104 mm width 875 grams weight Please note: Since the MadMax Monster LAND G-RIPPER tires give a very good grip, the rim and bonding are extremely stressed.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Here you can find the other tire sets shown in the picture: ARRMA ARA550061 Losi LOS45017/S Carson B501
Produkt EigenschaftenFahrzeugtypBuggyFelgenpositionVorne/HintenMaßstab1:5PakettypVormontiertReifen Innen / Felgen Aussendurchmesser4.75 Zoll
Genuine FG spare/option part.2-speed gear box, retrofitting is possible for all FG 1:6 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel.Included gears:1st gear: 18T / 46T2nd gear: 20T / 44TNot suitable for Competition and Formular 1 models.Contents:1 set
Extra-wide off-road tyre, suitable for 1/6 FG buggy/truck rims with widening ring! Diameter 165 mm, width 80 mm. Fits FG Leopard large models and HPI Baja with square adapter as well as other makes with 18 mm square rim mount. We have tested with different rubber/tyre compounds over several months on various types of terrain etc. The Mammoth provides top traction, especially on hard and not particularly grippy surfaces, due to its quite strong and large lugs, as well as the extreme width of the tyre! The Mammoth is available in the shore hardnesses soft, medium and hard! The following applies: the harder the surface, the softer the tyre compound should be. Where other tyres erase the ground because they lack grip, the Mammoth provides brutal propulsion. With a few exceptions, the Mammoth will probably only be used on the rear axle. 1 pair
MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and with reinforced orange beadlock rings for Losi and HPI. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 24 mm hex wheel drive Contents:2 pairs / 4 pieces Some off-road tires knowledge can be found here!
Genuine ARRMA spare/option part. This dBoots COPPERHEAD2 MT tire set will plough through rough terrain on a wide range of surfaces. With bigger tread blocks, a thicker carcass, a bigger overall diameter and added internal ribbing compared to the SB version, these heavy-duty tires offer increased durability when the action gets wildFeaturesTires: Aggressive tread pattern for excellent traction on all off-road surfaces - Big tread blocks - Thick carcass - Extra internal ribbing - Durable material compound for long-lasting performance - Pre-glued for trouble-free fit and servicingWheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - Steel reinforced 24mm Hex for strength during extreme driving action and easy servicingFoam Inserts: High-quality foam with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristicsTECHNICAL INFORMATION:Wheel bead diameter: 4.8" (122mm)Width: 4.17" (106mm)Wheel hex size: 24mmOverall diameter: 8.31" (211mm)Contents:1 Pair / 2 pieces