22 products found for "y1550"

rc-car-online - Home

y1550 ZTW LCD Programming card

Genuine ZTW spare/option part. For programming the ZTW Beast Pro 300A 12S ESC and 200A 8S ESC as well as for connection to a PC and for firmware updates of the esc.The Gecko software from ZTW on the PC is required for this: Specification:Length: 91 mmWidth: 54 mmHeight: 18 mmWeight: 68gPower supply: DC 5.0V - 12.0VContents:1 piece

€29.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1559 LED Effect module with switch for Losi 5ive-T, 5ive-T 2.0, DBXL/XL-E and others

Genuine rc-car-online spare/option part.A "must have" for every run in the dark. A total of 11 different lighting effects are programmeded into this LED module. The LED strip has the same size like that of the Losi 5ive-T 2.0 and the Losi DBXL-E and can therefore replace for the OEM version in its bracket.The LED module is typically powered by the receiver battery (maximum 7.4V). Depending on the version selected, the effects are changed via the radio (requires a free channel on transmitter and receiver) or via an onboard switch.The LED strip has on the back of an adhesive strip with which it can be glued on loose on the body. In the shop's options menu you can add an optional mounting bracket for the Losi 5ive-T.Modes:Continuous whiteContinuous white 30% intensityOffKnightRider redKnightRider whiteKnightRider blueKnightRider greenPolice 1Police 2SafetyCarRainbow chaser lightStrobo-Light whiteDimensions LED:Length: 160 mmHeight: 10 mmDimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 set

€68.90*

y1450 Steel protractor

Genuine HT spare/option part. Stainless steel protractor with 200 mm leg for angles up to 180°. Well-suited for measuring of camber or toe--in/toe-out on rc cars.Contents:1 piece

€9.90*

y1350 Aluminum engine mount for Losi DBXL, reinforced version

Genuine HT spare/option part. Aluminum engine mount for Losi DBXL with reinforced threads due to separate threaded inserts. The steel inserts are set with thread locking compound and feature a flange on the top side for an absolute secure fit.A much safer seating of the engine and the ability to dissipate heat into the chassis plate are the advantages over the stock plastic engine mount.The original screws can be re-used.Contents:1 piece

€14.90* €34.90* (57.31% saved)

y1590 Subaru Impreza Ralley Monte-Carlo 99 Decal set

Decal set fits y1589 Subaru Impreza Monte-Carlo 99 body shell.Contents:1 piece

€29.90*

y1553 Porsche 962C 1/5 for 530/535 mm Wheelbase with rear wing, painted

Fits on 2WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Due to the low body shell, you need the low height FG airbox # 9043.Complete painted for 1/5 scale for 530/535 mm wheelbase. With rear wing, mirrows and decals.Required body mounts: Mount front: FG 7020/14 Frontrammer Rear body mount: FG 7155 Karosserieauflage hinten Side body mount front: FG 3014 Karosseriehalter Side body mount rear: FG 3014 Karosseriehalter Contents:1 piece

€289.90*

y1557 SPEED TEC CRANK race ported top end set G320 7-ports

Race ported top end set for Zenoah G320 engine. The SPEED TEC CRANK genuine Zenoah G320 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina.SPEED TEC CRANK version modifications: Cylinder: Adjustment of compressionThe ports have been enlargedThree additional ports (7-port) have been machinedFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the portsy1016/002+3T Tuning transfer port covers:Reduced cross-section and flow-optimized transfer port cover plates for improved and faster gas flow for the Zenoah G320. The improved gas flow rate improves speed and gives faster throttle response in the medium rpm range. To improve mixture formation, the plates were glass bead blasted after machining. Piston:Weight reducedSkirt shortenedPiston above and below piston ring taperedSet includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portTo achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().

€359.90*

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec

CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*

y1556 SPEED TEC CRANK race ported top end set Chung Yang F270

Race ported top end set for Chung Yang F270.The SPEED TEC CRANK genuine Zenoah G290 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC CRANK version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the ports Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome polished The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().Contents:1 set

€259.90*

y1554 BMW M4 1/5 body shell for 530/535 mm Wheelbase with rear wing, painted

Fits on 2WD and 4WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Complete painted for 1/5 scale for 530/535 mm wheelbase. With rear wing and decals.Required body mounts:Mount front: FG 7020/15 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8014 Body mounts Side body mount rear: FG 9014/01 Body mounts Contents:1 piece

€299.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1540 Losi Super Baja Rey / 2.0 / Rock Rey complete set of sealed bearings

Genuine rc-car-online spare/option part. Complete set of sealed (2RS) bearings for Losi Super Baja Rey / Rock Rey.4 pieces 4 x 8 x 3 mm Losi # LOS25700715 pieces 8 x 16 x 5 mm Losi # LOSA6942/016 pieces 10 x 19 x 5 mm Losi # LOS257006Price bought separately 78.56 EURSpecial-offer price for the complete set 39.90 EURContents:25 pieces of of sealed (2RS) bearings

€39.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/5 carsFits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 40 cmHeight: 30 cm

€49.90*

LED Effect module for Losi 5ive-T, 5ive-T 2.0, DBXL/XL-E and others

Genuine rc-car-online spare/option part. A "must have" for every run in the dark. A total of 11 different lighting effects are programmeded into this LED module. The LED strip has the same size like that of the Losi 5ive-T 2.0 and the Losi DBXL-E and can therefore replace for the OEM version in its bracket.The LED module is typically powered by the receiver battery (maximum 7.4V). Depending on the version selected, the effects are changed via the radio (requires a free channel on transmitter and receiver) or via an onboard switch.The LED strip has on the back of an adhesive strip with which it can be glued on loose on the body. In the shop's options menu you can add an optional mounting bracket for the Losi 5ive-T. Modes:Continuous whiteContinuous white 30% intensityOffKnightRider redKnightRider whiteKnightRider blueKnightRider greenPolice 1Police 2SafetyCarRainbow chaser lightStrobo-Light whiteDimensions LED:Length: 160 mmHeight: 10 mmDimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 set

€67.90*

y1530 Traction oil for differentials

y1530 Size: y1530/100 -100 ml+ 5EUR

Genuine HT spare/option part. Differential oil, suitable for Lightscale Smooth, SCS and Mecatech differentials. Specially designed for grippy tracks. The differential oil provides a good locking effect combined with very good traction.Contents:1 piece / 50 ml / 100 ml

Variants from €7.90*

€12.90*

y1560 Gear box oil for Lightscale STD / STX Smooth differential, 50 ml

y1560 Version: y1560/02 - Medium

Genuine Lightscale spare/option part. Contents:1 piece / 50ml

Content: 50 Milliliter (€258.00* / 1000 Milliliter)

€12.90*

y1558/04 Losi 5ive-T LED mount, Spare part

Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 piece

€12.90*

15507, elcon Evo 04 XL a-arms, adjustment section l/h, 1 pce.

Fits the elcon Evo 04 XL a-arm main section.

€26.35*

y1558/01 LED bar Spare part

Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimensions LED:Length: 310 mmHeight: 10 mmContents:1 piece

€24.90*

y1553/01 Porsche 962C 1/5 for 530/535 mm Wheelbase with rear wing with mirrow, clear

Fits on 2WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Due to the low body shell, you need the low height FG airbox # 9043.Clear body shell for 1/5 scale for 530/535 mm wheelbase. With rear wing and mirrows.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts Dimensions: Length: 900 mm Width: 395 mm Height: 230 mm Contents:1 piece Painting tips:

€199.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1558/02 LED module for radio control, Spare part

Genuine rc-car-online spare/option part. Spare part for y1558.Contents:1 piece

€44.90*

y1558/03 LED module with switch, Spare part

Genuine rc-car-online spare/option part. Spare part for y1559.Contents:1 piece

€44.90*

15508, elcon Evo 04 XL a-arms, adjustment section r/h, 1 pce.

Fits the elcon Evo 04 XL a-arm main section.

€26.35*

22 products found for "y1550"

Filter products

rc-car-online - Home