27 products found for "y1447"

rc-car-online - Home

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*

y1441 Audi RS5 DTM clear

Audi RS5 DTM clear body shell for 1/5 cars with 530/535 mm wheelbase.The set includes main section and front air dam as well as the required special screws.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.Rear wing, side flaps/winglets and several decal sets are available from the options menu.The front section is also available separately as a spare part with part number y1441/01.This Audi RS5 DTM body shell is also available fully painted with either Team Audi Ultra (y1441/06) or Team Jägermeister (y1441/07) design.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€239.90*

y1444 Mounting bracket for tuned pipe mufflers

Genuine HT spare/option part. Extra large bracket with wide surface allows for the use of two strong cable ties at the same time. You can even use a hose clamp at ones own discretion. The bracket comes with M5 lens flange head screw, nut and washer as well as with special temperature resistant cable ties. Content:BracketEach M5 screw, nylock nut and washer4 x temperature resistant cable tie 4,8 x 290 mm

€9.90*

y1440 Team Decals Post for BMW M3 ALMS

Team decal sheet, suitable for BMW 320si body shells with the order numbers: y1437.Team decal sheet includes the following manufacturers: Deutsche Post, Hankook, Sonax, Castrol, EDGE, Zollner, Sachs, Allgeier, H&R, Exide, GNB. Dimensions:Big decal sheet: 390 x 200 mmPost logo for the roof: 210 x 145 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mm

€34.90*

y1547 Complete screws set for Traxxas X-Maxx and XRT 4x4

Genuine rc-car-online spare/option part. Komplete set of screws set for the Traxxas X-Maxx and XRT 4x4.The set includes a total of 334 screws, in different quantities which are all used on the Traxxas X-Maxx 4x4.9 sizes of cap head screws2 sizes of CSH screws12 sizes of button head screws2 sizes of set screws3 sizes of button head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:6 piecesM2,5x1410 piecesM3x102 piecesM3x1232 piecesM3x1420 piecesM3x166 piecesM3x1814 piecesM3x203 piecesM3x252 piecesM4x22Countersunk head screws in 10.9:3 piecesM4x1014 piecesM4x14Sheet metal screws in 10.96 piecesM3x650 piecesM3x88 piecesM3x82 piecesM3x102 piecesM3x1212 piecesM3x1644 piecesM4x1224 piecesM4x1424 piecesM4x166 piecesM4x2010 piecesM4x2516 piecesM4x302 piecesM4x35 Sheet metal screws with flange:14 piecesM3x103 piecesM3x123 piecesM3x16Grub screws:2 piecesM3x42 piecesM4x4

€44.90*

y1437 BMW M3 Superstars, unpainted 2mm with rear spoiler

The set is supplied crystal clear/unpainted! Lexan thickness 2mm The body is not drilled, therefore suitable for all 1/5th scale models with a 535 mm wheelbase. EFRA number: 5063/14 Available in the following thicknesses: 1.00 mm thickness (in the set without rear spoiler) y1437/02 1.50 mm thickness (in the set without rear spoiler) y1437/01 2.00 mm thickness (in set with rear spoiler) y1437 (selected) Rear spoiler: 8147 FG spoiler BMW 320si WTCC and BMW M3 Superstars The set is delivered not painted. The body is not drilled and fits touring cars of all 1/5 scale brands with a 535 mm wheelbase.EFRA number: 5063/14Rear Wing:8147 FG Rear wing BMW 320si WTCC and BMW M3 SuperstarsRequired body mounts:Mount front: FG 7020/12 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7012 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

€199.90*

y1442 Audi RS5 DTM car specific decal set

Car specific decal set for y1441 Audi RS5 DTM body shell.

€19.95*

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters

Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

y1449 Molded tire inserts green for 170 mm Ø HPI + Losi tires with 60/75 mm width

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the green colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the HPI-Baja 5B series with 170 mm tire diameter is available in two widths.Replacement part for MadMax Multi Pin and Giant Grip tires.

€19.90*

HT Aluminum front suspension for Carson / Smartech C5, UNO / R5, Attack, Superattack, GasBlaster and Touareg, y1047 - Set

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

€269.00*

y1247, Hobbythek/GPM Dirt-Cover Line for Carson Wild Attack, HPI Baja 5B models, set

Normal retail price: 51,80 EUR for the set. The set is suitable for all Carson Wild GP Attack, Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt and HPI Baja 5b models. Included in the scope of delivery: - GPM Air Filter Cover, No. BJAFCO - GPM Starter Cover, No. BJPSCO - y0515 GPM Shock-Cover y0515 GPM Shock-Cover These protective covers for the shock absorbers keep dirt away from the piston rods and seals. This significantly increases the service life of these parts. Set of 4 pieces GPM air filter cover, no. BJAFCO GPM air filter cover, the pre-filter cover is simply slipped over the existing air filter. An elasticated band at the bottom secures the cover to the filter. The maintenance intervals for the main filter are extended enormously, especially in very dusty environments. Suitable for almost all standard filters, both foam and K&N. 1 piece GPM Starter Cover, No. BJPSCO The ‘air filter’ for the pull starter, prevents the starter from becoming clogged with dirt or grass. Also improves engine cooling when riding on grass, as less grass gets into the cooling air duct. Easy to fit using Velcro tape. With metal cable guide. 1 piece

€39.90*

Charging cable for receiver battery with AMP plug, y0447, 1 pcs.

Charging cable for all hump packs an batteries with AMP plug. Also fits for the internal charging jack from the HPI Baja 5b and the HPI Baja 5t cars.

€7.40*

11447 Self-locking hexagon nut M3, 10 pcs.

Item N° 11447 Self-locking hexagon nut M3, 10 pcs.Part is delivered in silver or black color from vendor!

€2.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1427 HT steel spur gear on-road with 39, 40, 41 teeth

y1427 Version: y1427/40 HT steel spur gear

Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions

€49.90*

y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini

y1467 Version: y1467/02 Set with Torx screws 10.9+ 4.9EUR

Genuine Smartech spare/option part.Includes the complete set 26 body mounting washers, 22 support plates and corresponding screws for an original Losi 5ive-T or Losi 5ive-Mini body.Your choice of screws with either Allen head or hexalobular drive (a.k.a. Torx) heads!Content:26 pieces of mounting washers22 pieces of support plates14 pieces of countersunk screws (DIN7991) Allen head M4 x 20, 10.9 grade Alternatively TX10 Torx head, 10.9 grade12 pieces countersunk screws (DIN7991) Allen head M4 x 16, 10.9 gradeAlternatively TX10 Torx head, 10.9 grade

Variants from €13.90*

€17.41*

y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r

y1477 Versin: y1477/03 Set for the front and rear axle+ 112.74EUR

Genuine HT spare/option part.These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.We recommend y0809 Klüber grease for lubrication of closed HD drive cups.A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction. The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.You can find advices for installation at the specifications-tab.Contents:Front set:2 pieces of 300M steel HD differential drive cup, front and rear application2 pieces of driveshaft bootsRear set:2 pieces of 300M steel HD differential drive cup, front and rear application1 pair of modified bearing carriers2 pieces of driveshaft boots

Variants from €119.90*

€232.64*

y1441/03 Audi RS5 DTM Flaps/winglets

Fits Audi RS5 DTM body shell.

€22.90*

y1437/01 BMW M3 Superstars, unpainted 1,5 mm

The set is supplied crystal clear/unpainted! Lexan thickness 1,5 mm The body is not drilled, therefore suitable for all 1/5th scale models with a 535 mm wheelbase. EFRA number: 5063/14 Available in the following thicknesses: 1.00 mm thickness (in the set without rear spoiler) y1437/02 1.50 mm thickness (in the set without rear spoiler) y1437/01 (selected) 2.00 mm thickness (in set with rear spoiler) y1437 The set is delivered not painted.The body is not drilled and fits touring cars of all 1/5 scale brands with a 535 mm wheelbase.EFRA number: 5063/14Rear Wing:8147 FG Rear wing BMW 320si WTCC and BMW M3 SuperstarsRequired body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7012 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

€199.90*

y1445/01 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square) Offer

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.

From €129.90* €149.90* (13.34% saved)

Details

y1441/06 Audi RS5 DTM body shell, painted, Team Audi-Ultra paint theme

Painted Audi RS5 DTM body shell with Team Audi-Ultra paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Audi Ultra paint sheme.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€299.90*

y1441/07 Audi RS5 DTM body shell, painted, Team Jägermeister paint theme

Painted Audi RS5 DTM body shell with Team Audi-Jägermeister paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Jägermeister paint sheme.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€269.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1444/01 Temperature resistant cable ties 4,8 x 290 mm

Genuine HT spare/option part. Particularly advantageous for installation of tuned pipe exhausts. Content:20 pieces

€4.95*

y1441/04 Audi RS5 DTM Rear wing mounts

Fits y1441/02 Audi RS5 DTM body shell rear wing and many other rear wings.Contents:2 pieces

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1441/01 Audi RS5 DTM replacement front section

Fits y1441 Audi RS5 DTM body shell.

€39.50*

27 products found for "y1447"

Filter products

rc-car-online - Home