11 products found for "y1192"

rc-car-online - Home

y1592 SpeedTec Teflon Carburetor gasket 0,5mm

Genuine SpeedTec spare/option part. For Zenoah G230/G240/G260/G270/G290/G320. Advantages Extremely temperature resistant, up to 300°C Seals 100%, even without stickin Seal can be used several times No more slipping of cylinders or isolators! Contents:1 piece

€5.40*

This product is no longer available.

y1198 Futaba transmitter charging cable - 1pce.

€6.20*

This product is no longer available.

y1172 Mammoth offroad tires extra wide, mounted and glued on original FG 1:6 rim, 2 pcs.

Extra wide tire mounted and glued on genuine 1/6 scale FG buggy rims 6105/01 with extension ring!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:softhard Unit price:- Mammoth tires extra wide: EUR 47.20 / pair- Mammoth inserts extra wide: EUR 9.90 / pair- genuine FG wide track rims 6105/01: EUR 14.90 / pair- genuine FG rim extension rings 6436: EUR 14.90 / pair- mounting + glueing rims / extensions / inserts / tires: EUR 13.00Total: EUR 99.90 Priced per pair.We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Also suitable for:With the following wheel adapter: y1183 Rim adapter

€69.90*

Configure now

2009-03 Cask shaped springs for Mecatech Klick-Shocks and Big Bore, red 2,7 mm

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,7 mm

€16.90*

2009-05 Cask shaped springs for Mecatech Klick-Shocks and Big Bore, sixpack

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Set with one pair each of blue, red and yellow springs.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 49,5 - 52,5 mm

€49.90*

Replacement bushings 5x6x6 mm, y1182, 8 pcs.

For upper HT alloy a-arms Gas Devil.Inner diameter 5 mmOuter diameter 6 mmWidth 6 mmSet of eight

€6.10*

2009-02 Cask shaped springs for Mecatech Klick-Shocks and Big Bore, blue 2,6 mm

€16.90*

2009-04 Cask shaped springs for Mecatech Klick-Shocks, yellow 2,8 mm

€16.90*

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €289.90*

Details

11923, Self-locking hexagon nut M4 - 5pcs.

Part is delivered in silver or black color from vendor!

€2.20*

11922, Self-locking hexagon nut M5 - 5pcs.

Part is delivered in silver or black color from vendor!

€2.20*