25 products found for "y1096"

rc-car-online - Home

y1016 Zenoah G320RC with Walbro carburetor WT1107

With 32 cm³ and 30% more power than the Zenoah G290.Significantly more torque and higher stamina due to larger sized bearings all around, with Racing Carburetor Walbro WT1107.The motor is supplied with WT-1107 carburetor and spark plug.SpecificationType: Two stroke gasoline engineDisplacement: 31,8 cm³Bore: 38 mmStroke: 28 mmWeight: 2,3 KgOverall Dimension:Length: 167 mmWidth: 215 mmHeight: 196 mmMaximum Output: 4,6 PSMaximum Torque: 2,00 N-mRotation Direction: CounterclockwiseCarburetor: Walbro WT-1107Spark plug: CMR7HStarting: Recoil starterFor all HPI Baja 5 cars the G320RCer clutch housing has to be shortened at the mounting base, for Losi 5ive- T and Desert Buggy XL cars the clutch housings overall length must be shortened to CY size.With the new "K & N" version of the Losi DBXL there is another detail, which need to be considered.From the very beginning the hole pattern for the engine installation in the DBXL chassis plate was no precise match to the hole pattern of the engine, even when delivered in stock form with standard engine. Now with the "K&N" version the engine mount has been changed to eliminate this discrepancy. However, all aluminum engine mounts available on the market share their dimensions with the previous plastic engine mount. For the installation of a G320 Zenoah in a "K&N" -DBXL two possible combinations exist in order to obtain the correct hole pattern:When using the standard (new) plastic engine mount a shortened clutch housing is required as in a 5ive-TWhen using an aluminum engine mount a stock length clutch housing is requiredSeparately, it is recommended to enlarge the cutout in the body panel in front of the K & N air filter for about 2 - 3 mm to ensure that the panel cannot chafe on the air filter.When installing the air filter you must pay attention to the length of the screws.For use on Losi and HPI we recommend M5x45 screws (like H94763); you can also cut existing screws to length, of course.When ordering with a modified clutch housing we will include these screws!In our shop you can select from Zenoah G320RC engines already modified to fit your HPI or Losi car.The installation of the Zenoah G320RC in other cars (like FG or Smartech buggies / monsters a.s.o.) is not even remotely straightforward, since the layshaft pinion (the small pinion in front of the big differential spur gear) is in the way for the larger Zenoah G320RC crankcase.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€339.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

HT replacement flanged bushing 4 x 5.5, y1096, 4 pcs.

For mounting the brace cam in HT aluminum center diff mounts for Carson / Smartech 4WD cars.Inner diameter 4 mmOuter diameter 5.5 mmWidth 3 mm

€3.90*

y1036 HT rose joints with conical spacers

Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

y1046 Clemps for hydraulic brake lining 4 mm

Genuine rc-car-online spare/option part. Clemps for hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Contents:8 pieces with mounting screws

€9.50*

y1026 HT Aluminum a-arm 2WD, front lower, one-piece

Genuine HT spare/option part.Very strong one-piece a-arm for use with rose joints. Features Igus bushings for the hinge pins (stock hinge pins can be re-used).Rose joints not included!Fits FG Marder, Beetle, Pajero, Off-Road Buggy 2WD and Monster Beetle: Carson / Smartech Attack, Super-Attack und Gas-Blaster! Please note:There are no different a-arms for l/h or r/h applications, therefore the rose joint enters the arm from the top or the bottom depending on the application. Contents:1 piece

€54.90*

y1099 Flex wing rc-car-online - 1 pce.

The flexible rear wing for FG and Carson / Smartech offroad cars, with reinforcement ribs on the underside.

€19.90*

HT-Alloy pinion for Attack onroad use y0096, 1 pce.

Hard-coated 25T alloy pinion for use in combination with a . This pinion allows for use of the car on tarmac running touring car tires.Module: m=1,5

€27.90*

2009-04 Cask shaped springs for Mecatech Klick-Shocks, yellow 2,8 mm

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 49,5 mmWire diameter: 2,8 mm

€16.90*

y1396 Reed valve piston

y1396 Version: y1396/32 - Zenoah G320

Genuine Zenoah piston with machined recess for use with Are reed valve block BJ035. Please note: Differing widths of the remaining webs of the piston skirt are caused by production spread of the pistons.Version:y1396/29 - Zenoah G290y1396/32 - Zenoah G320Content:1 piece

€39.90*

y0196 Cask-shaped springs for 16 mm Shocks

ha_0050 Version: y0196/F15 - Orange/black

Genuine HT spare/option part. Available in several versions. The springs are suitable for shocks with 16 mm diameter.For the front axle:order no.:Wire size/Length:Color:y0196/F12,4 x 48 mmyellowy0196/F22,5 x 48 mmorangey0196/F32,6 x 48 mmredy0196/F42,7 x 48 mmpurpley0196/F52,8 x 48 mmblueFor the rear axle:Order no.:Wire size/Length:Color:y0196/F122,4 x 55 mmyellowy0196/F132,8 x 55 mmorangey0196/F142,5 x 55 mmbluey0196/F152,6 x 55 mmorange / black stripey0196/F162,3 x 55 mmredOil recommendation for genuine Evo shocks:viskosity 3000 for cold weather viskosity 4000 for hot weatherContents:2 pieces

€17.90*

2012-42 Mecatech Spherical Bearing, replaces to y1036

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€27.90*

y1596 INNOTEC Allround Complete Set

Genuine INNOTEC spare/option part. The RC-car all-round wellbeing set for cleaning, sealing and moisture displacement. Set contents: INNOTEC PE100 silicone spray for plastic and rubber care PE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic, which is thus protected from the inside out, remains permanently supple and retains its natural gloss. Content 500 ml Can INNOTEC Multi Spray 1000, moisture displacing lubricant Multi Spray 1000 is a strong moisture displacing lubricant that loosens stuck parts and protects against corrosion. Multi Spray 1000 displaces moisture by penetrating between the substrate and water and then protecting the substrate like a protective film. The product is ideal for numerous applications in the RC hobby. Content 500 ml Can INNOTEC Adhesive remover and degreaser Seal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove. Content 500 ml Can INNOTEC Power Clean Metall- und insbesondere Aluminium Reiniger Power Clean ist ein sicherer, schnell wirkender Reiniger/Entfetter für fast alle Arten verunreinigter Metallteile und -flächen. Das Produkt entfernt Bremsstaub, Teer, Unterbodenschutz, Fett und diverse Wachse und jede Art von Verschmutzung. Power Clean ist ein ungefährlicher Reiniger für elektronische Brems- und ABS-Systeme. Da das Produkt den Untergrund nicht angreift, eignet es sich auch besonders zum Entfernen von Teerspritzern sowie Fettund Ölflecken. Content 500 ml Can INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants. Content 600 ml Can Set consists of:5 Dosen

€59.90* €76.90* (22.11% saved)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1496 Overall for driver figure for H.A.R.M kart RK-1, hand-crafted

y1496 Color: y1496/03 - Red

Genuine HT spare/option part.Affectionately custom-made hand-sewn overalls suitable for the H.A.R.M Kart RK-1. It is tailor-made and can be exchanged directly against the stock overalls.Available in three different color combinations: y1496/01 - yellowy1496 / 02 - blue y1496 / 03 - red Contents:1 piece

€99.90*

LOS251096 Losi Turnbuckle Set for DBXL-E 2.0

Genuine Losi spare/option part. Contents:6 pieces

€59.99*

1096/02 FG Ball socket 5mm Evo 04-14+Evo 2020

Genuine FG spare/option part. Only suitable for Evo 04 - 14 and Evo 2020, 5mm front ball stabilizer.Bore accepts 11.5 mm ballTotal length 104 mm

€14.90*

1096/05 FG Spherical nut Evo 04

Genuine FG spare/option part. Only suitable for Evo 04 front and rear ball stabilizer. Old Version.Contents:4 pieces

€7.70*

ARA310966 ARRMA 19T HD Mod1 Pinion Gear for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€16.99*

1096/01 FG Ball guide 5mm Evo 04-14+Evo 2020

Genuine FG spare/option part. Only suitable for Evo 04 - 14 and Evo 2020, 5mm front ball stabilizer.Dimensions:Ball diameter: 11,5 mmTotal length: 104 mmContents:1 piece

€13.50*