27 products found for "y1048"

rc-car-online - Home

y1048 HT Aluminum-Frontaxle for FG Sportsline

Genuine FG spare/option part. Suitable for FG Sportsline (old version, not 4wheel drive basic) and Eco-Line.The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A y1210HT Aluminum front bulkhead B y1036HT rose joints with conical spacersUnit prices: 318,30 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Additional parts shown on the pictures, like diskbrakes or other tuning parts, are only decoration and not part of the set. Contents:1 set

€269.00* €318.30* (15.49% saved)

y1008 CFH gas

Genuine HT spare/option part. Propan/Butan gas mix for the torch above, similar units and cigarette lighters. Contents:1 piece / 100 ml

€3.50*

y1028 HT Aluminum front bulkhead A for 2WD

Genuine HT spare/option part.With provision to mount a stabilizer bar. Comes with two pairs of special bushings to adjust camber changes during the suspension movement.For a complete bulkhead you need droop stops y1029 (not included)!Fits 1/6 cars like Marder, Monster Models, Pajero, Beetle and many more. Contents:1 piece

€29.90*

y1046 Clemps for hydraulic brake lining 4 mm

Genuine rc-car-online spare/option part. Clemps for hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Contents:8 pieces with mounting screws

€9.50*

y1068 HT Aluminum shock tower set 2WD

Genuine HT spare/option part.Set includes shock tower Marder y1032, fits Marder, Beetle, Pajero, Monster Beetle Aluminum bulkhead brace for y1031.Contents:1 set

€69.90*

y1043 connector straight for hydraulic brakes - 1 pce

connector straight for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€8.90*

y1078 HT Aluminum shock tower set Off-Road Buggy

Genuine HT spare/option part.Set includes Aluminum shock tower Off-Road Buggy 2WD y1035, fits FG Off-Road Buggy 2WD only and bulkhead brace y1031.Contents:1 set

€79.90*

y1044 Y-connector for hydr. brake system - 1 pce

Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1041 Angle connector 90° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1042 Angle connector 45° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

y1040 T-connector for hydr. brake system - 1 pce

T-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1548 Ball bearings 8 x 16 x 5 mm

Genuine rc-car-online spare/option part. Contents:4 pieces

€14.90*

HT Aluminum front suspension for Carson / Smartech C5, UNO / R5, Attack, Superattack, GasBlaster and Touareg, y1047 - Set

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

€269.00*

y0148 Long carburetor brace

Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece

€19.90*

y0048 HT Alloy Ring Gear Adaptor 47/52/60 mm outside diameter

zahn_0011 Version: y0048/01 - 47 mm Ø small (38T)

Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms

€39.90*

LOS251048 Losi Battery Strap, DBXL-E

Genuine Losi spare/option part. Contents:6 pieces

€19.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

10488 FG Carbon fiber reinforced brace front/rear

Genuine FG spare/option part. Will not fit by competition models.Alternative to alloy reinforcing braces front and rear 10043.Contents:1 set

€31.90*

y1042/01 Angle connector with adaptor 45° for hydraulic brakes

Angle connector for all hydraulic brake linings with a outside diammeter of 4 mm. e.g Colari, Magura II and Mecatech.

€12.90*

10480/01 FG Stabilizer 3 mm

Genuine FG spare/option part.Spare part for 10480.Contents:2 pieces

€15.70*

10480 FG Stabilizer F1 front/rear

Genuine FG spare/option part.Continously adjustable stabilizer for front and rear axle. Suitable for Formula 1 Sportsline chassis.Contents:1 set

€59.90*

10480/05 FG Stabilizer shaft

Genuine FG spare/option part.Spare part for 10480.Contents:1 pieces

€8.30*

10480/03 FG Ball collet ring 7 mm

Genuine FG spare/option part.Spare part for 10480.Contents:2 pieces

€6.90*

y1483 Walbro WT-1048 Racing carburetor

y1483 Version: y1483/01 WT-1048 Racing carburetor

Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€97.90*

27 products found for "y1048"

Filter products

rc-car-online - Home