38 products found for "y1003"

rc-car-online - Home

y1008 CFH gas

Genuine HT spare/option part. Propan/Butan gas mix for the torch above, similar units and cigarette lighters. Contents:1 piece / 100 ml

€3.50*

HT Aluminum rear suspension conversion kit for Smartech UNO, Carson Attack / Super Attack / Gas Blaster / C5 / R5, 2WD , y1003, set

Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

€299.90*

y0003 Billet brake lever, long

Genuine HT spare/option part. Fits HT Baja 5B premium brake and FG offroad models, race truck and Formula 1.Contents:2 pieces

€24.90*

y1030 HT Aluminum front bulkhead B for 2WD

Genuine HT spare/option part. Comes with two pairs of special bushings to adjust camber changes during the suspension movement.Fits 1/6 cars like Marder, Monster Models, Pajero, Beetle and many more.Contents:1 piece

€28.90*

y1303 T-connector charging cable 4mm

Charging cord for batteries with T-connector; cable length 300 mm, silicone insulated cable with gold-plated connectors.

€8.90*

y1043 connector straight for hydraulic brakes - 1 pce

connector straight for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€8.90*

y1007 CFH Diamant M50 gas torch

Genuine HT spare/option part. Powerfull high quality soldering torch with piezo igniter, runs on standard lighter gas. Great for removing bolts that have been installed using thread locking compound. Removable safety base for convenient hands-free operation., adjustable flameTechnical data:Flame temperature: approx. 1.300 °COperating temperature: approx. 650 °CTank capacity: approx. 26 g ButaneConsumption: approx. 20 g/hFlame adjustement: from 12 mm to 32 mmIgnition system: piezo ignition (like electronic lighters)Please note: due to shipment regulations the torch is not filled with gas when delivered!Contents:1 piece

€39.90*

y1203 HS gilmer belt for FG 4WD cars, 1 pce.

Dimensions same as FG 66237.Very high rupture strength and tearing resistance as well as reduced wear make this belt the perfect choicefor race applications where maximum reliability is a must.Fits cars with 490 and 510 mm wheelbase only. Does not fit WB535 cars! For all FG Offroad 4WD models with 490-510mm ( Offroad buggy, monster and stadium) and all FG Sportsline 4WD 510 ( Porsche GT3, Mini and BMW E30 ) leng 635mm, wedth 18mm.

€34.90*

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

y1009 Zenoah G240RC with Walbro carburetor WT 990

23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

y1013 Motul Air filter oil for foam filters

Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml

Content: 400 Milliliter (€47.25* / 1000 Milliliter)

€18.90*

y1603 SPEED TEC CRANK Team-Edition Zenoah G270 Tuning engine

The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, the intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Cylinder modified for installation of the ignition systemPiston:Transfer port area optimized for flow, weight reduced and the piston-roof is flow-optimized and polishedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€949.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1033 HT Aluminum front suspension for FG Marder, Beetle, Pajero, Monster Beetle 2WD, set

The sets include:Item N°Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1028HT Aluminum front bulkhead A for 2WDy1030HT Aluminum front bulkhead B for 2WDy1036HT rose joints with conical spacersy1029HT aluminum droop stopsy1032HT Aluminum shock tower Marder 2WDy1031HT Aluminum bulkhead brace for 2WDUnit prices: 391,00 EURThe sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower.Please note: the hinge pins are not included, you will use the pins from the stock suspension!Fits FG Marder, Beetle, Pajero and Monster Beetle.

€339.00* €391.00* (13.3% saved)

y1103 Body support

y1103 Size: y1103/01 - Small

Genuine HT spare/option part. You can select from two different sizes of body support.Dimensions small body support y1103/01:Length: approx. 80 mmWidth: approx. 16 mmDistance bore to bore: approx. 64 mmDimensions large body support y1103/02:Length: approx. 105 mmWidth: approx. 16 mmDistance bore to bore: approx. 88 mmBore diameter: approx. 8 mmContents:2 pieces

€7.90*

y3003 Thomas Sabo DTM decal sheet

y3003 Elasto film: Original film

Thomas Sabo DTM decal sheet with several other sponsors.List of sponsors:Thomas SaboH&RPetronasHankookStihlJewellery & WatchesA large Thomas Sabo watch decal for the roofThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Dimensions:1 x 240 mm x 310 mm1 x 220 mm x 310 mm

€29.90*

y18003 HT-shock mounts for 2WD Monster-Truck, front lower

Shock mounts for the lower a-arms. Sold in pairs.

€37.90*

y0003/01 Pin for Billet brake lever y0003 and y0015

Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

y2003 Tuning front suspension set for nearly all FG 4WD Sportsline cars

y2003 Model: y2003/03 - FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR

Tuning front suspension set for all FG 4WD Sportsline cars: Monstertruck; Baja; Marder; Beetle; touring cars:Not fit Formular 1, Leopard and Truggy!y2003/01 fits:FG 4WD Monster-Truck models, Beetle.Part number:Name:y68412Aluminum front lower a-armsy2000Alu Querlenker Front unteny68413Aluminum front uprightsy0563Aluminum shock tower Monster-Truck/Beetley1036Rose joint for alloy wishboney2003/02 fits: FG 4WD Baja Buggy.Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishboney0579Alloy roll cage brackety2003/03 fits:FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR. When installing in a Porsche GT3 RSR or Mini Cooper 4WD with 510 mm wheelbase, the steering travel limiter must be installed into the first threaded hole of the knuckle arm and not at the standard location on the knuckle as in off-road cars!Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishbone

€469.90* €599.90* (21.67% saved)

y1023 MadMax CROSS BOND 170x80/x60 complete set for Traxxas X-MAXX 4x4 with adapter

Offerset:1 Pair MadMax Cross Bond front tires 170x60 mm1 Pair MadMax Cross Bond rear tires 170x80 mm1 Pair MadMax front rims 60 mm1 Pair MadMax rear rims 80 mm1 Pair MadMax front inlays 60 mm1 Pair MadMax rear inlays 80 mm2 Pairs / 4 pieces adapter TT1020/01CROSS BOND 170 x 80 mm and 170 x 60 mm tires with black MadMax Extreme 20 bolt-beadlock rims with 24 mm hex drive and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars.The set consists of two each front and rear tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

From €139.90*

Details