10 products found for "y0975"

rc-car-online - Home

y0915 Original Zenoah G270 rebuild kit, set

Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*

y0945 HT-Alloy gear plate for Gas/Hell Devil/CRT 4x4/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Gear plate, surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0957 HT-Alloy steering centerlink for Gas/Hell Devil/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Steering centerlink, very strong, does not bend.The stock high socket ball / M3 bolt will be replaced with a standard unit / M4 bolt without the unnecessary leverage.Standard plastic bushings and a spacer (used as an axle) replace the expensive proprietary bolts and bushings from the stock part. Rebuilding the bearings becomes cheap and easy with this centerlink.All parts included.Contents:1 piece

€34.90*

y0795 SPEED TEC 5ive-T original 26er EXPERT tuning engine

The SPEED TEC EXPERT genuine 5ive-T engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe (to the tuned pipes).

€599.00*

y0975 Alloy spring retainer big or small to choice

y0975 Version: y6092 Replaces FG 6092

y7092 Alloy spring retainer, smallGenuine HT spare/option part.Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:2 piecesy6092 Alloy spring retainer largeGenuine HT spare/option part.Alloy spring retainer, replaces FG 6092.Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 25 mmAccepts springs with approx. 20 mm inner diameterSlot for 4 mm shock shaftContents:2 pieces

€19.90*

y0972 Hose clamps for exhaust hose

y0972 Diameter range: y0972/02 - 25 till 40 mm

Genuine HT spare/option part.Sizes available:y0972/01 - 20 to 32 mmy0972/02 - 25 to 40 mmSteel band zinc plated for corrosion protection. You can use either a socket wrench or a screw driver with flat or Phillips tip form installation.Band with is 9 mm, diameter is infinitely adjustable. The large version is especially suited for larger exhaust hoses like our blue silicone hose y19031.Content:2 pieces

€2.70*

y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.

y0675 Connector: y0675/01 FG connector

Item N° y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.Double-block special battery pack, 6 volt / 5000 mAh, with FG or universal connector.Dimensions: approx. 72 x 53 x 29 mmConnector:UniversalFGEspecially designed for the high current demand in FG 4WD cars NiMh battery pack, fits the stock battery tray.Can be used for FG Evo cars and Competition cars as well.The Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. The basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

€74.90*

Opel Vectra vehicle decals, y0275 - set

The vehicle decals include lights, grille and so on, no team decals.Sheet dimensions:480 x 260 mm480 x 225 mm

€20.50*

y0976 Alloy shock shaft end, long or short to choice

y0976 Version: y7087/02 - Long+ 1EUR

y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

Variants from €14.90*

€15.90*

y0075 BMW 320si WTCC body shell clear, 1 pce.

Fits chassis with 535 mm wheelbase, current touring car width. EFRA and DMC homologated. Body set includes front part and main part. A rear wing is available through the shop's options menu. The body shell is vac-formed from 2 mm Lexan.Efra # 5052/06Required body mounts:Mount front: FG 7152/01 Rear body mount Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmPainting tips:

€199.96*

10 products found for "y0975"

Filter products

rc-car-online - Home