15 products found for "y0972"

rc-car-online - Home

y0972 Hose clamps for exhaust hose

y0972 Diameter range: y0972/02 - 25 till 40 mm

Genuine HT spare/option part.Sizes available:y0972/01 - 20 to 32 mmy0972/02 - 25 to 40 mmSteel band zinc plated for corrosion protection. You can use either a socket wrench or a screw driver with flat or Phillips tip form installation.Band with is 9 mm, diameter is infinitely adjustable. The large version is especially suited for larger exhaust hoses like our blue silicone hose y19031.Content:2 pieces

€2.70*

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

y0792 SPEED TEC EXPERT Zenoah G260 tuning engine

The SPEED TEC EXPERT genuine Zenoah G260 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Adapter cable, high current / universal, y0922 - 1pce.

High current connector for the battery and Futaba / universal connector for the receiver.

€7.20*

y0962 FG manuals set Off-Road Buggy 2WD, set

Genuine FG manuals as included with the cars.

€3.90*

y0672 Painted Audi A4 DTM team Jägermeister body shell

Genuine HT spare/option part. Fits chassis with 535 mm wheelbase, standard touring car width. Set of flaps included. The body shell is vac-formed from 2 mm Lexan.This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 530/535 mm wheelbase.Set contains:FG 4149 Body shell A4: 180,-- EURFG 4153/01 Car decals: 24,90 EURFG 4153/02 Window masking: 6,55 EURy0683 Big decals Jägermeister: 22,90 EURSurcharge Jägermeister painting + glueing the decals: 163,20 EURRegular price: 397,55 EURRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mmContents:1 piece

€279.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0572 Adapter for servo saver shaft C5 / R5 and C6, 1 pce.

y0572 Adapter for servo saver shaft C5 and C6, 1 pce.For the servo saver shaft in Carson C5 and C6

€1.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0942 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, rear upper

Genuine HT spare/option part. Rear lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications. Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0472 Piston pin for 29 / 30,5 cm³ big bore kit, 1 pce

Spare part for the 29 / 30.5 cm³ big bore kit y0466

€7.90*

y0937 HT Replacement body for y0932

Genuine HT spare/option part.Spare part for y0932.Contents:1 piece

€37.90*

y0938 HT Replacement lever for y0932

Genuine HT spare/option part.Each one lever inklusive M3 x 10 mm screws. Spare part for y0932.Contents:1 piece

€27.90*

y0902 Reinforced differential tube for FG buggy differential

Genuine HT spare/option part.Extra strong tube machined from 7075-T6 high grade aluminum with an outerdiameter of 49 mm. This tube is made to solve the problem of destroyed differential tubes in off-road cars, it is several times stronger than the stock version.Contents:1 piece

€34.90*

y0975 Alloy spring retainer big or small to choice

y0975 Version: y7092 Replaces FG 7092 or Carson 32556

y7092 Alloy spring retainer, smallGenuine HT spare/option part.Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:2 piecesy6092 Alloy spring retainer largeGenuine HT spare/option part.Alloy spring retainer, replaces FG 6092.Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 25 mmAccepts springs with approx. 20 mm inner diameterSlot for 4 mm shock shaftContents:2 pieces

€19.90*

y0976 Alloy shock shaft end, long or short to choice

y0976 Version: y7087/02 - Long+ 1EUR

y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

Variants from €14.90*

€15.90*

ARA310972 ARRMA 25T HD Mod1 Pinion Gear for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€15.49*

15 products found for "y0972"

Filter products

rc-car-online - Home