16 products found for "y0943"

rc-car-online - Home

y0943 HT-Alloy a-arm for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Complete set set of all alloy a-arms, one pair of each version.Contents:1 set

€159.90*

y0443 EC3 charging cord

Heavy gauge (14 AWG / 2 mm²) charging cord with EC3 plug and gold plated contacts. Especially for Losi/Horizon rx-batteries which feature an EC3 connector additionally to the regular rx-connector. The EC3 system can candle much higher charging rates which reduces charging time of high capacity battery packs significantly.Dimensions:Length approx. 20 cm

€8.90*

y0543 Schneider Permanent Marker

Genuine HT spare/option part. Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.Recommended for marking and contour tracing on body shells.Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.Contents:1 piecePainting tips:

€2.90*

y0243 Tension adjustment clips

Genuine HT spare/option part. For easy, precise and equal adjustment of spring tension, fits all 1/5 and 1/6 shocks with a body diameter of 15 - 16 mm.Set with two clips each of 1, 2, 3, 4, 5 und 6 mm thickness.Contents:1 set

€3.95*

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0963 FG manuals set Marder Race 2WD, set

Genuine FG manual as included with the car.

€3.90*

y0643 Hose clamp 50 - 75 mm, 2 pcs.

Item N°: y0643 Hose clamp 50 - 75 mm, 2 pcs.Is need for mounting for tuning pipes for example.Clamping range 50 - 75 mm.

€5.90*

y0945 HT-Alloy gear plate for Gas/Hell Devil/CRT 4x4/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Gear plate, surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0953 Special crankshaft bearings bearing for CY/Zenoah G230/260/HPI Fuelie - 2pcs., SO

Special version for Zenoah / CY crankshaft with larger radius at the shoulder of the inner race.

€14.90*

y0941 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, front upper

Genuine HT spare/option part. Front lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications.Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0942 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, rear upper

Genuine HT spare/option part. Rear lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications. Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI engines, set

Rebuild kit for the Zenoah G260/04 engine to replace piston/cylinder related parts, fits the previous G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston bolt G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/0 for this application! Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0043 Steel shims DIN 988, 15 x 21 x 0.2 mm, 10 pcs.

Steel shimsPart is delivered in silver or black color from vendor!Dimensions:Inner diameter: 15 mmOuter diameter: 21 mmThickness: 0.2 mm

€4.90*

World Championship Touring Cars 2007, Two disc set, y0933

€13.85* €27.70* (50% saved)

World Championship Touring Cars 2007, Two Blu-Ray disc set, y0934

This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:This will be for the moment on Blu Ray DVD discs as Toshiba have yet (after ten months) to release their HD DVD Burner drive. I have tried a few authoring programs and as it is early days they all have their problems so the easy way is to provide the original files for people to select and play. These discs ?may? work in ?some? set top players but as Sony has just upgraded the firmware on set top boxes if yours cannot be updated then you may not be able to play them. However, as the vast majority of Blu Ray players are the much cheaper PlayStation3 (which is even cheaper now the 40 gig cut down version has just been released) these discs will play in all versions. So provided you are feeding your PS3 through an HDMI interface to as a minimum HD ready TV or better still a Full 1080P TV (these files are rendered in 1080P ) you will get the WOW factor. There is a read-me file on the DVD explaining all this.What do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience.

€28.50* €57.00* (50% saved)

y0143 Alloy engine mount, large, for Carson C5 / R5 / Smartech ranger / Reely onroad cars, 1 pce.

CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

€49.90*

16 products found for "y0943"

Filter products

rc-car-online - Home