16 products found for "y0789"

rc-car-online - Home

y0789 Chassis mud flaps for Losi 5ive-T/2.0

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Kamitiro FG parts set for Marder 4wd kit, y0089

Includes:1x 6050, spur gear carrier1x 6051, rubber pucks1x 6427, plastic spur gear 46T1x 6431 oder 6431/1, steel pinion 16T1x differential, complete1x 6048 oder 6048/1, differential spur gear 48T2x 6069/1, differential drive cups1x 6074/1, a-arms, rear upper1x 6076/1, a-arm turnbuckles

€153.80*

y0783 LiPo battery 3S/4000 mAh 11,1 V 45C/80C, 1 pce

Battery pack, suitable for FG electric models (two packs required).The housing of the cell is made of aluminum-plastic. High-performance LiPo battery for applications with high discharge rates.High power ratings guarantee excellent performance: continuous discharge rate 45C, burst rate 80C and charge rates of up to 5C.Only carefully selected cells are soldered together into a pack. Specifications: Cells: 3S Voltage: 11.1 V Capacity: 4000 mAh Length: 137 mm Width: 44 mm Height: 29 mm Weight: approx. 360 grams Continuous discharge rate: 180 A Burst discharge rate: 320 A Charging current: 5.0 ... 25.0 A XHP balancer connector, with XHP / EHR adaptor cable

€79.90*

y0780 RC-Car Comfort relax chair / camp-chair

Extremely rugged steel construction with comfortable, one piece seat and back rest Premium version made of coated 22 mm diameter steel tube, with horizontal folding mechanism and black, back-supporting and tear-resistant high quality upholstery fabric. Back rest with printed RC-Car logo on both sides. Padded black fabric armrests.Unfortunately, due to the folding mechanism and the bulky storage of these chairs, some scratches on the steel pipe are inevitable! Dimensions, folded: Length: 80 cmWidth: 50 cmHeight: 7 cm Dimensions set up:Total height: 80 cmSeat height 47 cm Seat:Width: 50 cmDeep: 40 cmWeight: 4.4 kg

€39.90*

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

y0769 Heavy duty plastic servo arm for Smartech 301502 servo, 3 pcs.

Item N° y0769 Heavy duty plastic servo arms for Smartech 301502 servo, 3 pcs.Heavy duty plastic servo arm with a total l^enght of 50 mm and six mounting positions.Content:Thee peaces

€7.90*

y0189 Large and small alloy engine mount for 2WD onroad models (C5 / R5)

Genuine HT spare/option part. CNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant. They come with all necessary hardware included.Contents:2 pieces

€79.90*

y0689 FG manuals set Formula 1 German, 1 pce.

Item N° y0689 FG manuals set Formular 1 German, 1 pce.Genuine FG manuals as included with the cars.

€3.90*

y0729 Gas-nitrited tuning clutch bell for HPI Baja, Carson Wild GP Attack models, 1 pce.

Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface whichguarantees dimensional stability even under high loads!Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM clutches Big Scale Extreme and Cross.Suitable for slot drive HPI Baja pinions, both stock using a 4mm bolt and aftermarket ones for 5mm bolts. Comes with M4 and M5 bolts included.

€49.90*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 7076/01 54 mm+ 2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.90*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66226B 84 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y0781/01 Dry-Fluid "Gear Lube" for gears, 10 ml

Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€1,690.00* / 1000 Milliliter)

€16.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005_01 Length: 84 mm, 66226+ 2.05EUR

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€21.95*

y0784/31 BMW E46 body shell with Mafia team decals

Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm

€269.90*

y0784/138 Painted Stadium Jeep body shell Camouflage

Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

y0784/03 Audi A4 body shell with silver painting

Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm

€219.90*

16 products found for "y0789"

Filter products

rc-car-online - Home