y0733/02 Extremely wear resistant organic friction pad

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

Special offer price!  Including Mecatech Expert hydraulic brake on the front axle.  Vehicle is pre-assembled, with a 26 cm³ combustion engine and almost 100 km/h fast, what more could you want? Another improvement is the hydraulic disc brake in the front wheels. (included, not installed) A crystal-clear polycarbonate body is included. Quality and high-quality equipment at a reasonable price. Technical description of the Formula 1 Sportsline chassis: The chassis of the FG Formula 1 is built on a high-strength 5 mm aluminium chassis. All chassis holes (screws) are countersunk from below. The front and rear axle with versatile adjustment options such as camber, caster etc. consists of double triangular wishbones. The double triangular wishbones of the rear axle are supported by additional track rods, with which the adjustment work can be carried out as quickly as possible. Thanks to the mounted wishbone threaded rods with right-hand and left-hand threads, all adjustment work can be carried out without dismantling any parts. The model is equipped with 4 aluminium oil pressure shock absorbers. The push-rod suspension ensures play-free transmission from the individual wheel suspension to the shock absorber. The Formula 1 chassis is supplied with a powerful 26 cm³ combustion engine. Power is transmitted via a four-jaw Teflon clutch to a toothed belt drive. This toothed belt drive is also designed for increased drive power. The BBS rims and tyres were modelled on the large prototypes. All rotating parts are mounted on ball bearings. The construction of the Formula 1 chassis is not identical to the other 1:5 FG models such as the Mercedes C-Class, racing truck etc. and therefore cannot be converted to these models using conversion kits.In unserer Shopauswahl ist das Modell auch inklusive kompletter RTR-Ausstattung erhältlich!RTR AusstattungRTR = Ready to Run. Die RTR-Version wird fahrfertig und mit montierter 2,4 GHz Fernsteuerung ausgeliefert.Sender 2,4 GHzEmpfängerHochleistungsservo für Gas und BremseGroßmodellservo für LenkungSenderakku, EmpfängerakkuMaße:Länge: 960 mmBreite: 440 mmHöhe: 230 mmRadstand: 620 mmFormel 1 Modelle in Action!Antrieb:2WDMaßstab:1:5Motorisierung:BenzinRTR:RTR auswählbar

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

Condition and scope of delivery see photos.With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 149.90