Genuine GPM spare/option part. 

Use a high strength two-component adhesive (e.g. Clutch-Safe) to glue in the pads and lock them with the countersunk screws M3x5 (part no. y0730/03)

Part no. 02 for GPM Big-Scale clutch.

For replacing the friction pads please proceed as follows:

1. Remove clutch from engine
2. Disassemble clutch
3. Remove the screws fixing the friction pads
4. Remove remains of old glue and clean the surface to be bonded of the shoes to bare metal
5. Thoroughly degrease the bonding area of clutch shoes and new pads
6. You must use the special adhesive y0743 Clutch-Safe!
7. Apply a sufficient and complete layer of the adhesive to the bonding surfaces
8. Insert the lining into the clutch shoe and align
9. Fix the pad in place with screw y0730/03, just hand-tighten it
10. Remove excessive glue with a rag
11. Preheat oven to 120 °C.
12. Put the clutch shoes into the preheated oven for exactly one hour; let the parts cool down
13. Reassemble clutch and install it onto the engine
14. Wait at least one hour after the gluing process before using the clutch

y0730	y0731

Content:

• 3 pieces