14 products found for "y0722"

rc-car-online - Home

y0720 rc-car-online Transmitter bag

Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€24.90*

y0722 Axle plugs for Losi 5ive-T/2.0, Mini

y0722 Quanity: y0722/02 - Set of 10+ 3EUR

For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

Variants from €3.90*

€6.90*

y0792 SPEED TEC EXPERT Zenoah G260 tuning engine

The SPEED TEC EXPERT genuine Zenoah G260 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0702 Copper-Exhaust gasket for Zenoah, CY, Fuelie, PT, etc.

Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.90*

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini

Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*

Adapter cable, high current / universal, y0922 - 1pce.

High current connector for the battery and Futaba / universal connector for the receiver.

€7.20*

y0723 Gas-nitrited tuning clutch bell for FG, Smartech/Carson, Harm, RS5 & Co.

Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece

€49.90*

y0729 Gas-nitrited tuning clutch bell for HPI Baja, Carson Wild GP Attack models, 1 pce.

Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface whichguarantees dimensional stability even under high loads!Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM clutches Big Scale Extreme and Cross.Suitable for slot drive HPI Baja pinions, both stock using a 4mm bolt and aftermarket ones for 5mm bolts. Comes with M4 and M5 bolts included.

€49.90*

y0022 HT Edge trim

Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€4.97* / 100 Zentimeter)

€14.90*

y0721 Receiver battery, hump pack, NiMh, 4500 mAh

y0721 Connector: y0721/01 - BEC

5 cells, 6 volt, cell size Sub-C.Fits for all HPI 1/5 scale models.Dimensions: approx. 69 x 51 x 42 mmUniversalFGBECHigh current

€54.10*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 7076/01 54 mm+ 2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.90*

y0728/06 GRP tires sponsor decals

Sponsor decal set from GRP with five GRP lettering.Measures:Width: 150 mmLength: 140 mm

€4.90*

y0726/01 Gas-nitrited tuning clutch bell for Losi DBXL+MTXL

Genuine HT spare/option part. Gas-nitrited tuning clutch bell with black oxide coating, machined from high grade. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well. This clutch bell is dimensionally identical to the stock part. Heat treatment and the use of a high grade material guarantee long service life.Due to a special heat treatment the clutch bell surface is shaded; this does not effect the function, but ensures great durability.Contents:1 piece

€49.90*

y2006/01 Double-sided split aluminium servo arm 17 teeth, 1 pc.

Split aluminium servo lever for more gentle screwing (with a 2.0 mm Allen key) with clamping on the servo output shaft! For servos that have an output shaft with a 17 mm multi-tooth shaft. For our y2006 Top Tuning digital Pro Servo 40 Kg Mounting holes with 3 mm diameter If you count the teeth on your servo, you can determine whether this aluminium arm fits your servo. Aluminium servo arms are indispensable for powerful digital servos, such as those used in large-scale models.

€19.90*

14 products found for "y0722"

Filter products

rc-car-online - Home