31 products found for "y0521"

rc-car-online - Home

y0521 Madmax/HPI-rim to FG-car wheel adaptor

y0521 Version: y0521 - for M6 wheel shafts

Genuine HT spare/option part.This adaptor allows you to install all MadMax/HPI tire/rim combinations on FG, Carso, Smartech 2WD/4WD and other cars with the same wheel shaft configuration. Losi 5ive tires can be used as well, but they hey have to be mounted on MadMax/HPI rims because Losi rims are too thick at the center. The adapter is drilled for 8 mm wheel shafts (FG, Smartech/Carson and many more!), hex size of wheel drive and wheel nut is 24 mm hex with M18x1.0 thread (same as HPI).Please note:FG wheel shafts come with either M6 or M8 thread size. It can even happen that a vehicle has different thread sizes front and rear! Therefore, please make sure which version is required before placing an order.Converting your car takes only a couple of minutes with this easy to install adaptor. just see picture "installation instruction" for a schematic installation.Contents:2 pieces

€39.90*

y0523 Special cleaner for foam air filters, 500 ml

Genuine rc-car-online spare/option part. Foam-Cleaner, special cleaning agent for foam air filter elements and GPM coverThe foam-Cleaner is specially designed for RC foam air filters, as well as covers for starter, filter and shocks. Removes reliably dirt, mud, dust, old filter oil, and sand particles and ensures optimum air flow. After cleaning please oil the air filter with air filter oil with order-no. y0284 for foam filters before re-use. Routinely cleaning of filters protects against premature wear and extends engine life!Use: apply cleaner to filter/cover, wait for some minutes and rinse with warm water. Let the parts dry before re-use.Bottle with 500 ml.Contents:1 piece

Content: 500 Milliliter (€19.90* / 1000 Milliliter)

€9.95*

y0251 Performance carburetor with accelerator pump type: WT-813A

Genuine Walbro spare/option part. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well.Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15,88 mm bore, 12,7 mm venturi. Ready for installation with modified shaft already installed. Contents:1 piece

€79.90*

y0621 Ball bearing , 15x24x5 mm, 2 pcs.

y0621 Ball bearing for alloy diff fit on Mecatech FW01 and no. y0928, 15x24x5 mm, 2 pcs.The ball bearings fit for the alloy differntial conversion kit for Gas/Hell Devil/CRT 4x4/Thunderbolt with the order no. .Measures: 15 x 24 x 5 mm

€24.90*

y0501 mf-RaceLine cask shaped springs, blue 2,9 mm, 2 pcs.

The famous cask shaped spring by Markus Feldmann. Especially designed for front suspension applications.Fits all touring car shock absorbers with an outer diameter of 16 mm.Caution: Not suitable for MecaTech Klick shocks.Dimensions:Height: 47 mmCenter diameter (outside): 30 mmInner diameter (top/bottom): 17 mmCable thickness: 2,9 mm

€17.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€54.90*

y0321 Off-Road tuning springs Dirt-Spring M

federn_dirt_m Version: y0323/01 - M11, yellow

Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces

€17.90*

y0721 Receiver battery, hump pack, NiMh, 4500 mAh

y0721 Connector: y0721/01 - BEC

5 cells, 6 volt, cell size Sub-C.Fits for all HPI 1/5 scale models.Dimensions: approx. 69 x 51 x 42 mmUniversalFGBECHigh current

€54.10*

y0529 Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball

y0529 Version: y0529L One piece left hand thread+ 1EUR

Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.

Variants from €5.90*

€6.90*

500405210 Carson Dog bone rear

Genuine Carson spare/option part. Contents:2 pieces

€39.95*

305212/s054068 RX-box Carson / Smartech 4x4

Genuine Carson spare/option part.

€11.40*

305217 Chassis plate Gas Devil

Genuine Smartech spare/option part.Content:1 piece

€79.90*

500405217 Carson Front drive shafts

Genuine Carson spare/option part. Contents:2 pieces

€79.99*

500405218 Carson Differential joint cup

Genuine Carson spare/option part. Contents:2 pieces

€34.99*

305213, Servo horn set Carson / Smartech 4x4

Carson

€16.15*

500405219 Carson Centre dog bone joint cup

Genuine Carson spare/option part. Contents:2 pieces

€34.99*

y0529/02 Steel ball joint M8 r/h or l/h thread, 5 mm bore in ball

One pieces of steel ball joint with 5 mm bore in ball and M8 r/h or l/h thread.Suitable for most every 1/5 and 1/6 car!Replaces FG plastic ball joints # 6029/08 and # 6081/01 in conjunction with the conical spacers # 4429/02.Replaces Smartech # 32409 and # 32446 as well.

€5.90*