18 products found for "y0516"

rc-car-online - Home

y0518 Hobbythek service bag

Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

y0616 rc-car-online Race Cap, 1 pce.

y0616 rc-car-online Race Cap, 1 pce.With rc-car logo on front and back. 100% cotton; with adjustable brass buckle to fit every head size. First class quality and workmanship.

€7.90*

y0916 Original Zenoah G290 rebuild kit, set

Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€94.90*

y0116 nitrided hardened Steel pinion with 14 to 48 teeth

Nitrided hardened, highly wear-resistant.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)For use on the clutch bell of FG cars in combination with a 48t spur gear on the layshaft. Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€29.90*

y0546 Hobbythek Sweatshirt, long sleeve M, 1 pce.

Top quality sweatshirts made from 100% combed cotton! With bright orange rc-car-online logo printed on front and back.Size: M.

€29.90*

y1516 Audi R8 body shell, Wheelbase 535 mm, painted

Fits on all standard width touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.The set included rear wing and mirrors. Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsFront body: 4171 FG Front body Audi R8 clearRear wing: 4172 FG Rear wing Audi R8 clearVehicle decals: 4173/01 FG Vehicle decals Audi R8 LMSDimensions:Length: 920 mmWidth: 385 mmHeight: 220 mmWheelbase: 535 mm

€299.90*

y0566 Replacement hook-and-loop tape for GPM starter cover and GPM Crankcase cover

Genuine HT spare/option part. For GPM starter cover and GPM Crankcase cover.Dimensions:Width: 8 mmLength: 400 mmContents:1 piece

€3.90*

y0513 GPM Set No. 13, Clutch bell, Steel pinions 17T and 18T

Complete set with clutch bell and one each 17T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 17T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 17T SBJ017TGPM steel pinion 18T SBJ018TO

€89.90*

2009-01 Cask shaped springs for Mecatech Klick-Shocks, orange 2,5 mm

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 55 mmWire diameter: 2,5 mm

€17.20*

y0816 Motul Shine&Go

Genuine Motul spare/option part. Motul Shine&Go, a silicone based care for all metal and plastic parts. Protects the surfaces with a long term non-stick protective film, helping to prevent dirt, grime, tire rubber and dust from adhering. Once applied after cleaning the model, dirt can be removed much easier next time.Contents:1 piece

Content: 400 Milliliter (€32.25* / 1000 Milliliter)

€12.90*

y0416 Hobbythek failsafe module

Genuine HT spare/option part.Failsafe unit with adjustable servo position, very low current drain (0.05mA). Excellent value for money!Attention: not compatible with digital servos!Contents:1 piece

€29.90*

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.

These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

y0513/01 GPM Set Clutch bell, Steel pinions 16T and 18T

Complete set with clutch bell and one each 16T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 16T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 16T SBJ016TOGPM steel pinion 18T SBJ018TO

€89.90*