24 products found for "y0058"

rc-car-online - Home

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

2 block tuning clutch y0051 adjustable for Zenoah, 1 piece

New adjustable 2-jaw clutch. - High-quality workmanship - Pads are individually replaceable - Individually adjustable to the conditions. For FG, Carson, Losi models and HPI Baja 5B, except FG F1 and EVO2020. 1 piece

€109.90*

y0458 Foam inserts for Monster/Stadium Dirt Grip tires

Genuine HT spare/option part. Tires inserts for Monster Dirt Grip tires or extra wide Mammoth tires with stadium rim.Dimensions:Length: 395 mmWidth: 60 mmHeight: 15 mmContents:2 pieces

€9.70*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

Bowden cable bracket, Baja premium brake, 1 pce., y0008

€20.50*

y0658 Narrow-Grip 462 type tires for Losi, HPI, FG, Carson and Co., 18 mm square drive

Off-road tires for sandy underground! Gives great results on those carpets which are typical for some off-road tracks. 462 grippy square studs per tire, a total of more then 1800 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability! Therefore the car is less prone to undesirable side rolls! The rim is the 6-spoke design with a steel reinforcement ring around the wheel drive. The NARROW-GRIP tires are available with either 18 mm square drive to fit FG & co. To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the square or hex drive and completely mounted via tightening the wheel nut! Dimensions:Outer tire diameter: 175 mmTire and rim width: 62 mmRim inner diameter: 119 mmWeight for one tire: 375 grams / for a pair: 750 gramshe manufacturer of the Narrow-Grip 462 indicates that the use of these tires on very heavy models, like the Losi 5ive-T under heavy conditions, such as jumps and shifting / tilting of the chassis, may lead to breakage of spokes or hex socket. Due to this notice that kind of failure will not be compensated. We apologize for this note!As an alternative, we recommend our special offer for the Losi 5ive-T OEM tires and in particular all tire combinations with MadMax EXTREME rims for FG, Smartech and Co.:y1400/01 - Tarmac Bustery1401/01 - Big Digger y1402/01 - Cross Bond y1403/01 - Over Lander y1404/01 - Giant Grip y1416/01 - Ultra Grip Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (18 mm square for FG Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. Wheels drives:18 mm square for FG & co.Contents:2 pieces / 1 pair

€39.90* €59.90* (33.39% saved)

y0358 Riot Pipe 3-chamber tuned pipe system for Carson Wild GP Attack and HPI Baja buggies

Chromed three-chamber tuned pipe system for Carson Wild GP Attack and HPI Baja buggies from the Australian exhaust manufacturer Powerslide Racing. Theres no need for cutting the stock Baja body shell for installation! Unlike many tuned pipe systems which are mounted in the rear of the Carson Wild GP Attack and HPI Baja cars and compromise power output due to the restricted available mounting space, the side mounting of the Riot Stampede allows for an optimized three-chamber system.You can see the Riot Stampede's multi-chamber design in the cutaway model shown in picture 9. The mounting system of Riot Stampede is secured by a tension spring and also provides the necessary flexibility even for jumps. The side mount uses a chromed adapter which is securely bolted to the chassis frame of your car. Set includes: Chromed tuned pipe Header and mounting bracket Complete installation hardware, as well as tension spring and exhaust hose

€189.90*

y0056 HT - Carson Wild GP Attack and HPI Baja 5B/SS/5T/5sc premium front disk brake

Normal price: 249,90 EUR Tuning front disk brake system for the HPI Baja 5B/SS/5T/5sc, the conversion kit includes all necessary parts. The brake includes the finest parts available for a cable brake and has the following features: * uses existing mounting points for all parts * brake pads and 70 mm diameter stainless rotors made by RS-5, the best performing combination available * hardened stud bolts for the brake pads * billet brake levers, no tweak and best transfer of servo power * ultraflex bowden cables * brake cams run in hardened steel bushings and brass guide plates (miniature bearings don't last in offroad cars) * billet alloy bowden cable support block with adjustment screws * billet alloy bowden cable mounts at the calipers * pre-assembledOn a 5T the stud bolts which hold the brake pads will interfere with the ribs in the rim. However, modifying the rim or swapping the stud bolts for long csh screws allows for installation on a 5T.Spare parts for this brake as a PDF-file with spare part numbersWe highly recommend the installation of a stronger throttle servo to take full advantage of this brake system. The is an excellent choice.

€239.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more

The XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cmWidth: 57 cmHeight: 39 cm

€59.90*

y0058 Shock absorber oil 10W - 20W for HPI and Mecatech Klick-Shocks, 1 pce.

y0058 Viscosity: 10w, y0058/10

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Shock absorber oil 10W for HPI and Mecatech Klick-Shocks, y0058/10, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Shock absorber oil 15W for HPI and Mecatech Klick-Shocks, y0058/15, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Shock absorber oil 20W for HPI and Mecatech Klick-Shocks, y0058/20, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Bergyogi DVD Sinsheim 2006, y0858

Video DVD covering the legendary indoor race for 1/5 touring cars in Sinsheim/Germany. More than 80 contestants, well known drivers like Ian Oddie, Hessel Roskam, Clark Wohlert, Markus Feldmann, Jennifer Bernauer, Roland Iff, Pascal Seegers and many many more among them, are proof for the importance of this race to the scene.This DVD also includes the ranking list and a photo show. Total run time: 112 minutes, PAL system, full screen.

€11.80* €23.60* (50% saved)

y0052 HT venturi adaptor set

luftf_0025 Engine: Solo

Upgrade in case you already own the airbox.Includes venturi adaptor, K&N filter, K&N filter oil (200ml spray can) and K&N filter cleaner (355ml bottle).When using a K&N Filters should observe the foam precleaner y19017 be used with wet-foam air filter oil. To complete coverage of the K&N filter Combat is respected, because the K&N filter without prefilter-oiled foam is to permeable to the off-road use.Please note:The flange on the bottom of the K&N filter has to be cut off for installation on the venturi adaptor!

€81.10*

y0098 Ceramic ball bearings, sealed, set

y0098 Set content: y0098/1 - set of 6

Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Available sets: Set consists 6 bearings, includes bearings for FG clutch bell, layshaft and differential (alloy case only!).Set includes:2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mmSet consists 14 bearings, includes all bearings from a standard FG-car (not Formula 1) with alloy differential.Set includes:8 pcs. 8x22x7 mm2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mm

€92.30*

DLD Maxi Blockpass, 1 pair, y0085

y0085 Mounted/glued: Tires only

DLD Maxi Blockpass offroad tire, fits FG Marder/Leopard/Beetle/Monster models, diameter 155 mm, width 60 mm, hard rubber compound.

€41.00*

y0038 Oil for shock absorber, all viscosities, 50 ml

y0038 Viscosity: y0038/200 - Viscosity: 200+ 1.5EUR

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€209.00* / 1000 Milliliter)

Variants from €8.95*

€10.45*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.

y0054 Type: y0054/01

Part No.: y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.Available in several sizes.Aluminum tube struts for construction of roll bars, battery holders and other useful things.The struts have various bores with 2 mm diameter. Similar to picture.Item N°Internal dimension:External dimensions:Länge:y0054/018,2 mm10 mm150 mmy0054/028,2 mm10 mm180 mmy0054/038,2 mm10 mm190 mmy0054/048,2 mm9,6 mm225 mmy0054/058,2 mm10 mm190 mmy0054/068,2 mm10 mm200 mmy0054/078,2 mm10 mm170 mmy0054/088,2 mm10 mm215 mmy0054/098,2 mm10 mm300 mm

€5.90*

y0048 HT Alloy Ring Gear Adaptor 47/52/60 mm outside diameter

zahn_0011 Version: y0048/02 - 52 mm Ø medium (39 T - 44 T)+ 5.5EUR

Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms

Variants from €39.90*

€45.40*

E540058 UFRC Layshaft spur gear

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€35.90*

510058, Nuts & bolts set, assy 3

Includes all screws, nuts and washers for installation of the bearing blocks and brakets for the second layshaft.

€12.80*

300058599 Tamiya 1:10 RC RAYBRIG NSX Concept-GT TT-02

Product information The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.• The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required. Technical details:- 1/10 scale kit model - Wheelbase 257mm - Detailed polycarbonate body (includes window masking film for painting) - Robust TT-02 chassis - 4WD shaft drive with protected drive train - Incl. electronic speed controller - Powerful 540 Torque Tuned motor Attention: Not suitable for children under 14 years.

€129.90* €160.00* (18.81% saved)

24 products found for "y0058"

Filter products

rc-car-online - Home