20 products found for "y0036_01"

Catalogue #1

Carburetor Walbro WT 603B with choke, ball-raced

7355/08 Carburetor type: Walbro WT 603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603B y0036/01 Ball-raced tuning carburetor Walbro WT 603B-RacingWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well. Ball-raced Zenoah G230/260 stock carburetor. Fits all Zenoah G230/240/260/270/290/320 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.Normal:Ball-raced:

€88.90*

y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")

Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces

€12.90*

Carburetor Walbro WT 1107 with choke normal/ball-raced

Walbro Vergaser WT1107 with choke Standard carburetor for Zenoah G320. Typ: Walbro WT1107This is the stock carburetor used for the G320RC engine, and will also work on all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³. Dimensions:Bore: 15,88 mmVenturi: 13,5 mmIndependent tunable high and low speed jets.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³.

€69.90*

Configure now

Carburetor Walbro WT 668B/668C with choke normal/ball-raced

Alternative: Walbro 603B also with choke. But with better manufacturing quality!The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetory0036/04 Ballraced tuning Walbro WT668B carburetorWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The Walbro WT668B carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT668B features an integrated choke with lever and a throttle shaft linkage lever.The Walbro WT668B carburetor is also available in a standard version under part number # y1067 Walbro WT668B carburetor.

€69.90*

This product is currently not available.

Carburetor Walbro WT 997 with choke normal/ball-raced

y1069 Walbro WT997 carburetor with chokeThe WT997 is certainly one of the most popular carburetors from the big Walbro program because its unproblematic to adjust. For this reason it is especially recommended for the less experienced rc-car driver.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT997 features an integrated choke with lever and a throttle shaft linkage lever.The WT997 is also available with ball-raced throttle shaft under part number # y0036/05 Ball-raced tuning carburetor Walbro WT997 with choke.y0036/05 Ball-raced tuning carburetor Walbro WT997 with chokeWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The WT997 is certainly one of the most popular carburetors from the big Walbro program because its unproblematic to adjust. For this reason it is especially recommended for the less experienced rc-car driver.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT997 features an integrated choke with lever and a double ball-raced throttle shaft with linkage lever.The Walbro WT997 carburetor is also available in a standard version under part number # y1069 Walbro WT997carburetor with choke. Fits all Zenoah G230/240/260/270/290/320 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.Normal:Ball-raced:

€69.90*

This product is no longer available.

Carburetor Walbro WT 990

7855 Carburetor type: Walbro WT990 Standard carburetor for Zenoah G290. Typ: Walbro WT990 Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Configure now

Carburetor Walbro WT 813

y0251 Performance carburetor with accelerator pump type: WT-813Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Configure now

y0035 rc-car-online Jacket

bekl_jacke Size: M

Genuine rc-car-online spare/option part. Rugged, universal jacket with many features.BreathableWindproofWaterproofSealed seams Concealed hood in collarRemoveable synthetic fur collar liningRemoveable sleeves Removeable synthetic fur inner liningPocket with zipper and pen holder on the sleeveTwo large chest pockets with zipperMobile phone pocket with cover and hook-and-loop closureTwo large pockets Inside pocket Material: 100% polyester, lining: 70% polyacryl, 30% polyester Contents:1 piece

€35.90*

y0037/05 Allen key bit 1/16

High quality bit made from S2 steel by KS-Tools. Fits the Allen screw on the throttle lever of our ball raced carbs and the screws for the ball joints on GPM trailing arms SB014L.Content:1 pieces

€4.90*

y0037/02 Steel shims 8 x 5 x 0.3 mm

Genuine HT spare/option part. Custom made steel shims.Part is delivered in silver or black color from vendor!Dimensions:Inner diameter: 5 mmOuter diameter: 8 mmThickness: 0.3 mmContents:5 pieces

€6.90*

y0031 Edge tape

farbe_0007 Width: y0031/02 - 6 mm+ 2.5EUR

Genuine HT spare/option part.Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:1 piece / 33 meters

Content: 1000 Zentimeter (€0.97* / 100 Zentimeter)

Variants from €7.95*

€9.66*

y0039 Oil for shock absorber, all viscosities, 100 ml

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€129.00* / 1000 Milliliter)

From €12.90* €15.40* (16.23% saved)

Details

y0038 Oil for shock absorber, all viscosities, 50 ml

y0038 Viscosity: y0038/200 - Viscosity: 200+ 1.5EUR

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€209.00* / 1000 Milliliter)

Variants from €8.95*

€10.45*

ARA480036 ARRMA Roll Cage for Outcast 8S

Genuine ARRMA spare/option part. Contents:1 set

€39.99*

y0032 Masking tape

farbe_0008 Width: y0032/01 - 19 mm

Genuine HT spare/option part.For masking of windows or various other locations in body shells that are not to be painted.Also ideally suited for templating patterns or shapes that are to be incorporated into the body to be painted .Contents:1 piece / 50 meters

Content: 5000 Zentimeter (€0.08* / 100 Zentimeter)

€3.90*