18 products found for "y0011"

rc-car-online - Home

2 block tuning clutch y0051 adjustable for Zenoah, 1 piece

New adjustable 2-jaw clutch. - High-quality workmanship - Pads are individually replaceable - Individually adjustable to the conditions. For FG, Carson, Losi models and HPI Baja 5B, except FG F1 and EVO2020. 1 piece

€109.90*

y0081 Spark plug cap shield

Genuine Hobbythek spare/option part.Spark plug cap shield, the 2-piece shield will be but around the stock spark plug cap and crimped together. Very effective, solves all ignition related radio problems!Fits Zenoah G230/240/260/270/290/320 and Chung Yang, Losi, HPI engines; for Smartech/Carson PT engines the cylinder shroud has to be modified slightly.Content:1 piece

€14.90*

Nuts and bolts set, Baja premium brake, y0012

€5.10*

y3011 Team Decals set Mafia car

Genuine HT spare/option part. Mafia style decal set, suitable for all cars.Dimensions:450 x 400 mmContents:1 piece

€29.90*

Brass spacer, Baja premium brake,2 pcs., y0010

€2.00*

y1011 Zenoah G270RC with Walbro carburetor WT 990

26 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G260RC:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerNew carburetor (WT-990) Contains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

Linkage rod Baja premium brake, 1 pce., y0014

€1.00*

Brake caliper Baja premium brake, 1 pce., y0001

€30.70*

y0311 Elcon Aluminum front upper a-arms for FG Leopard 1

Aluminum front upper a-arms for FG Leopard 1 These parts will fit FG Leopard 1/ Leopard Race (built until approx. 2007) only! The machined aluminum a-arms feature plastic bushings for the hinge pins. They significantly increase torsional stiffness of the front suspension. Regular price: 69.90 EURSpecial offer: 49.90 EURContents:2 pieces

€49.90*

y0711 Double sided split alloy servoarm for Savöx SV-0236MG, Rhino and Hitec 805 servo

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€19.90*

y0811 After-Run, performance enhancing preservation for all 1/5 and 1/6th scale models, 20 ml

Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml

Content: 20 Milliliter (€395.00* / 1000 Milliliter)

€7.90*

y0031 Edge tape

farbe_0007 Width: y0031/02 - 6 mm+ 2.5EUR

Genuine HT spare/option part.Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:1 piece / 33 meters

Content: 1000 Zentimeter (€0.97* / 100 Zentimeter)

Variants from €7.95*

€9.66*

y0003/01 Pin for Billet brake lever y0003 and y0015

Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks

Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Details