34 products found for "tour_txlr421_alu"
rc-car-online - Home
Item N° y0960/01 FG manuals set 4WD Sportsline touring cars Genuine FG manuals as included with the cars.
y1351 Version:
y1351/03 Complete set+ 149EUR
Genuine HT spare/option part. A must-have for 1/5 on-road racing! Even though it looks funny at first sight for uninitiated people! ;-) Just like in full-size racing our tires need a certain temperature to provide the necessary grip that is needed to achieve good lap times. Usually this means that the car will get really fast times only after a few laps. The driver who uses preheated tires has a considerably advantage. With cold outside temperatures or low grip tracks, like a not so clean parking lot, it often not possible at all to bring the tire temperature up to the required range just by driving. As a result the car will be difficult to control! Measures:maximum outer diameter of 130 mm maximum tire width of 80 mmThat includes all standard 1/5 touring car tires! ( ) Instructions: The tire warmers may be operated only on 12 to 13.8 volts AC or DC. In order to reach optimum operating temperature, a power supply with a 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 is the perfect solution for this application. The operation of the tire warmers directly from a 12 volt car battery (without Powerbase) is also possible, of course. In order to prevent damaging the filament inside the blanket, they must not be bent and not used without tires!Contents:1 set
Variants from €99.90*
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.
%
dvd_em_2005 System:
PAL
DVD-set of the touring cars european championship 2005 in Gothenburg/Sweden made by Chris Wright (Rev-Up racing magazine).Highlights:- The opening parade- Footage at track level- Slow motions- Picture-in-picture effects- Jumps- Rolls and so on- New parts- Pit footage of the cars and people- Final run - Award ceremony- Interview with the winnerNumber of DVD's: 2Total currency: about 120Min.Available in PAL and NTSC-Version
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We always supply the latest version of the Mecatech FW01Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- Tires
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit :engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. The following components are not included in the Performance Kit not and can be selected individually through the choice of options: engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control! included in the kit:clutch bellbell pinionshaft and screw for clutch installationdifferential spur gearnot included:differentialbody shellairboxrear wingengineelectronicstiresclutch We are currently waiting for the latest version of the Mecatech FW01.
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for touring cars, 530/535 mm weelbaseContents:1 set For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html
Genuine Samba spare/option part. Moca Racing air box carbon ultralight with aluminum adapter, foam filter and breakage protector.DMC no. 5-1801.Contents:1 set
Genuine FG manuals as included with the cars.
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218
%
dvd_em_2006 System:
NTSC
This Double-DVD set, made by Chris Wright from the well known Rev-Up racing magazine, is in MPEG2 format which means it will play on any PC and most MAC computers with the appropriate software (PowerDVD, WINDVD and so on). He used multiple cameras to get this footage from different angles and positions on the track. It is is native wide screen format at 16:9 in PAL.Includes the opening ceremony, concourse, track view and trip, Greek dancers, hot laps by top drivers, four laps shown simultaneously of top drivers so you can compare styles etc, the all important first lap from different angles, pit walk and track stuff during the week, slow motion of all those rolls, loops, spins and crashes, both half finals and the main final, the prize ceremony. You also get a free bonus video of the 24 hours team race at Lostallo a few weeks ago.
For converting the Sportsline 2wd 510 touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts required for the conversion.Attention!Only suitable for new FG Sportsline 510 models with vertical engine and new fronr axle with housing.Not suitable for older FG Sportsline models with horizontal engine.
%
This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:This will be for the moment on Blu Ray DVD discs as Toshiba have yet (after ten months) to release their HD DVD Burner drive. I have tried a few authoring programs and as it is early days they all have their problems so the easy way is to provide the original files for people to select and play. These discs ?may? work in ?some? set top players but as Sony has just upgraded the firmware on set top boxes if yours cannot be updated then you may not be able to play them. However, as the vast majority of Blu Ray players are the much cheaper PlayStation3 (which is even cheaper now the 40 gig cut down version has just been released) these discs will play in all versions. So provided you are feeding your PS3 through an HDMI interface to as a minimum HD ready TV or better still a Full 1080P TV (these files are rendered in 1080P ) you will get the WOW factor. There is a read-me file on the DVD explaining all this.What do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience.
Genuine FG spare/option part.Body detail kit with different rearview mirrors, windscreen wipers and aerials to give the Touring car bodys a more detailed look.Contents:1 set
Item N° y0960/02FG manuals set Ecoline touring carsGenuine FG manuals as included with the cars.
%
This two Blu-ray disc set of the European Championships in Austria in 2007, made by Chris Wright from the well known Rev-Up racing magazine.On the Opening ceremony you get the full version right up to and including the fireworks display in the evening. Concourse of the cars; Track Ambience; New Parts seen there; Slow motion stuff; Quarter Finals; Semi Finals; Main Final; Prize giving ceremony. As a bonus there is a 40 minute tour of Austria taking in the centre of Vienna by foot and carriage, then out and about to Monasteries, Castles, Palaces, parks, towns and so on all set to the gentle music of Strauss and Mozart. A second bonus is the last of the six series GP?s in 2007 in the new format which has proved so successful. This is the UK GP.PAL-SystemPlease not the following information provided by Chris Wright from Rev-Up racing magazine:"A lot of you will realise that for the past two years we have been filming in High Definition 1920 x 1080 resolution which gives 4-5 times the resolution you get on your normal TV or DVD. It is only in the last few months that software and hardware burners have become available and this European Championship is offered to the few of you who have the equipment needed to watch these High Definition discs and get the WOW! Factor. Sadly Toshiba have not yet made available their HD DVD burner but we are hoping it will be available for the Worlds DVD?s in October. (We will release this European Championship on HD DVD when the required burner is available).We cannot burn a DVD type menu onto Blu-Ray and have compatibility with all Blu-Ray players due to the HSCP copy protections routines built into Blue Ray players and PS3 units by order of Sony and their licensing requirements. This makes it very hard for independent authors to produce High Def content on Blu-Ray. Even when I did make various copies and by trying the disc in three different players at a large electronics warehouse and a Sony shop found that one would not play it, the second one did but the screen was covered in artifacts (copy protection routines scrabbling the picture) and on the PS3 it reduced the resolution to half what it should have been. We are in very early days at present and so far it looks like HD DVD may be the way for Independent Authors unless of course SONY wake up and alter things for us regarding their paranoia over copy protection which we understand but consider there are better ways than alienating people.So as this version at present is confined to Blu-Ray what do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience. So our apologies for it not being able to work on a set-top player at present."So, sit back and enjoy the High Definition experience these videos will give you.
A protective cover for large 1:5 touring car models, black with FG logo. 1 piece
%
DVD-set of the touring cars world championship 2005 in Lostallo/Switzerland made by Chris Wright (Rev-Up racing magazine).Highlights:- OnBoard-Video from the wm track- The concourse of cars and winners- The opening parade- A full week of pit stuff and track action including lots of slow motion antics- Shots from the helicopter- Tips and interviews from top drivers- Quarter finals, both semi finals and the full final run with running scoreboard and picture in picture.- Award ceremonyNumber of DVD's: 4Total currency: about 240Min.Only available in PAL-Version.
Genuine Toruex spare/option part.
%
em_2008_touren Version:
DVD
This video of the European Championships in Luxembourg in 2008, made by Chris Wright from the well known Rev-Up racing magazine is available on DVD and Bluray disc.On both formats you get the full week of action on the track with slow motion stuff at very close quarters, in-car-cam tour of the track, the main final, Concourse of the cars, Opening Ceremony of the Teams, Awards Ceremony. There are two bonus videos of the Warm-Up Race in Luxembourg in May and the EFRA Off-Road GP in the UK as well. For those taking the Blu Ray version, not only do you get all this in Full High Definition but you also get our trip behind the scenes of a South African Lion Farm we were at in May on a private visit this year on an appraisal of the venue for the Worlds in 2009.The Blu Ray version will be provided on a 50 gigabyte DVD. To make it as compatible with the hardware out there it has been done to Sony Firmware Version 2.0 so a PS3 60 gig and 40 gig will work just fine. If for some reason it does not then either by Ethernet cable or wireless connection, upgrade the operating system in the PS3.One last thing. When DVD's first came out in the nineties, blank media was very expensive. This is the same with Blu Ray. It has come down in price but needs to come down more. Sadly we have had to pay the going rate which is why the disc is a little expensive but well worth it to see the action inglorious High Definition at the maximum resolution of 1920 x 1080. Even Holloywood Studios only give you 24 frames per second (we do 25) and if you are lucky 25,000 bitrate but more than likely 18,000 (we give you 30,000 for higher resolution).
