156 products found for "ritzel_gas_devil"

rc-car-online - Home

HT-Steel pinion for Carson / Smartech 4WD cars

ritzel_gas_devil Size: y0344 - 40 teeth

Genuine HT spare/option part. Nitrited steel gears, fit Carson Gas Devil / Smartech Thunderbolt 4x4 only.These gears are available with 37T or 40T, both share the same diameter and must be used in combination.Please note: the gears cannot be used in combination with the stock gears and the 37T version is no replacement for the stock 37T gear!This gives you the following new gear ratios:I=10.58I=9.79 (when using two identical gears !)I=9.06The stock gear ratio is I=11.38 and I=8.42 is possible by switching the gears.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€44.90*

s054314, universal drive shafts for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Cardan drive shafts fits on Carson Gas Devil + CRT 4x4, Conrad Hell Devil and Smartech Titan on front or rear axle. Does not fit Thunderbolt!Universal joint diameter: 18 mmLength over all: 190 mmDistance between joints, center/center: 119 mmBall diameter: 10 mmAxle shaft diameter x length: 8 mm x 53 mm

€79.90*

y0929 HT Aluminum limited slip differential conversion kit for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Alloy case conversion kit for Carson Gas Devil, Carson CRT 4x4, Conrad Hell Devil and Smartech Titan, can be used for the center differential onlyComes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings, diff tube and the parts for the slip adjustment device.Adjustment of the locking effect:The adjusting screw which presses on the bevel gear axle and the thrust bearing regulates the locking. This causes friction between the bevel gear and the diff. housing. The locking effect can be adjusted between 0% and about 90%. The adjustment has to be changed according to track surface and dirt accumulation.Loosen the locking effect completely if the track is wet.Contents:1 piece

€129.90*

s054301, Smartech aluminum shock tower front for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - 1 pce.

Machined alloy version replaces the stock stamped part, 5 mm high strength alloy.

€79.90*

s054302, Smartech aluminum shock tower rear Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - 1 pce.

Machined alloy version replaces the stock stamped part, 5 mm high strength alloy.

€79.90*

305215, Roll cage Gas Devil, set

€34.99*

305181, Steering linkage Gas Devil

content:1 pieces

€17.90*

305217 Chassis plate Gas Devil

Genuine Smartech spare/option part.Content:1 piece

€79.90*

305158, Shocks repair kit Gas Devil

€39.90*

305194, Bumper brace Gas Devil, 1 pce.

€3.90*

305184 Shock Tower rear Gas Devil

Genuine Smartech spare/option part.Content:1 piece

€29.90*

305161 Shocks Gas Devil, rear, 2 pcs.

Item N° 305161 Shocks Gas Devil, rear, 2 pcs.Mounting hole distance: 173 mmTravel: 56 mmDiameter: 30 mm

€69.90*

305216, Rocker plates Gas Devil, 2 pcs.

€13.49*

305204 Drive shaft, outer, Gas Devil

Genuine Smartech spare/option part.Total length: 130 mm.Contents:2 pieces

€29.90*

305192 A-arm, front upper Gas Devil

Genuine Smartech spare/option part.Content:2 pieces

€9.90*

305196, A-arm, rear lower Gas Devil, 2 pcs.

€9.90*

305192H, A-arm, front upper Gas Devil, reinforced, 2 pcs.

Reinforced stiffer plastic compound

€14.80*

y0943 HT-Alloy a-arm for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Complete set set of all alloy a-arms, one pair of each version.Contents:1 set

€159.90*

s054320, Smartech tuning brake Gas/Hell Devil/CRT 4x4/Thunderbolt / Titan, set

Set includes 2 rotors, 4 brake pads and 4 return springs. The steel rotors will last significantly longer on the differential drive cups, wear between rotors and brake pads is reduced as well.

€49.90*

905046 Carson tuned pipe for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - set

Item N° 905046 Carson tuned pipe for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - setLow mounting alloy pipe, installs between the wheels. Comes complete with manifold and mounting hardware.When installing this pipe on a Thunderbolt some minor modifications to the body shell are necessary to clear the manifold.

€129.90*

y0941 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, front upper

Genuine HT spare/option part. Front lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications.Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0945 HT-Alloy gear plate for Gas/Hell Devil/CRT 4x4/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Gear plate, surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0939 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, front upper

Genuine HT spare/option part. Front upper a-arms, replaceable plastic bushings, l/h ad r/h version available. Contents:2 pieces

€69.80*

y0942 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, rear upper

Genuine HT spare/option part. Rear lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications. Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

156 products found for "ritzel_gas_devil"

Filter products

rc-car-online - Home