79 products found for "reso_0008"

rc-car-online - Home

Samba 4110 for Off-Road and monster models 2WD/4WD tuned pipe

Genuine Samba spare/option part.Samba announced this pipe as the monster model / Off-Road pipe, but it fits Beetle/Pajero/Monster Beetle/Monster Truck and 2WD/4WD FG models as well. Will fit Carson CPT as well with some minor modification to the body shell in the bed area.The large distance between pipe and tire is a big advantage especially for the Monster models. The mounting wire is already bent into the correct shape for easy installation.Complete system with steel manifold and hardware for installation included.Content:1 set

€199.90*

Details

Masterfix replacement spring, y0166 - 2pcs.

Pack of twoTotal length 29 mmLength centre section 9 mmDiameter centre section 4.3 mmwire diameter 0.7 mm

€4.10*

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

DYNC0008 EC3 connector, female

Genuine Dynamite spare/option part.Contents:2 pieces

€6.99*

HF0008 Toe adjusting block 4° right

€2.48* €4.95* (49.9% saved)

E540008-L UFRC A-arm, front lower l/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€18.90*

E540008-R UFRC A-arm, front lower r/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€18.90*

5711/1 Mielke silicone protection ring for resonance tube

2 pieces

€6.95*

Bowden cable bracket, Baja premium brake, 1 pce., y0008

€20.50*

HB0008 Brake shaft for 2 discs and ball bearing brake, 1 pce,

Original Hurrax replacement part made from stainless steel.

€4.98* €9.95* (49.95% saved)

HT - tuned pipe for buggies - 1pce.

Reasonable priced 3-chamber aluminum tuned pipe, fits FG Marder/Beetle/Pajero and Carson Attack. Comes with manifold, teflon tube, hose clamps and mounting wire included.Also fits Comanche, CRT, CPT

€82.00*

Details

7407/02 FG Support for silencer, 2 pcs.

Genuine FG spare/option part.Replacement part for 7407 CFRP supporting brace f. Tun. pipe, set

€11.50*

y1482 Spring band clamps for tuned pipe connectors, 22 to 34 mm diameter range

y1482 Size / piece: y1482/06-5 Spring band clamps 27 - 29 mm+ 4.5EUR

Genuine HT spare/option part.Spring band clamps are self-clamping and can self-adjust to diameter changes due to temperature variations or properties of the tube material.With this feature of self-adjustment, spring band clams are ideally suited for hose connections between exhaust manifold and tuned pipe with their high temperature load.Unlike worm drive clamps with their relatively large adjustment range, spring band clamps must be selected closely related to their intended application. For this purpose, the outer diameter of the hose in the mounted state must be measured. The clamp, whose nominal diameter corresponds most accurately to the value determined, should be used.In the options menu you can select from sizes ranging from 22 to 34 mm and packs of one or five clamps.Contents:1 piece / 5 pieces

Variants from €0.99*

€5.49*

6293/01 FG Tuning pipe 1:6 - 1pce.

Reasonable tuning pipe for FG 1:6 Buggies and Monster models as well as for Carson 1:6 models.

€116.95*

Details

HK0104 Cover tuning pipe pc

€17.98* €35.95* (49.99% saved)

10216 FG Silencer for F1 - 1pce.

Suitable for the Formula 1.

€111.50*

10215 FG Exhaust manifold for tuned pipe F1

Genuine FG spare/option part.For use with Formula 1 Sportsline tuned pipe and tuning pipe 10400 only.Contents:1 piece

€51.80*

10403 FG Tuned pipe F1 - set

New developed Tuning pipe with significanty more power due to the longer manifold and bigger volume. To mount this Tuning pipe the battery 6543/1 is necessary.

€244.95*

B69026 Tuned pipe system, complete

Contents:1 set

€199.90*

67399 FG Tuned pipe for Leo 2020 2.0 4WD

Genuine FG spare/option part. Contents:1 set

€329.50*

B53026 Pipe rubber mounting block

Mounting thread size M5Rubber element diameter 25 mm x height 32 mmTrunnion for body clip with 6 mm diameter and 2 mm bore.Contents:1 piece

€12.90*

6299 FG Steel-Power 1:6 Tuning pipe FG 2WD and 4WD Off-Road

Genuine FG spare/option part. Newly developed tuned pipe made of strong steel sheet, with plug connecting system. The pipe mounts close to the car for best protection possible and versatile usability. Suitable for:FG 2WD and 4WD 1:6 Off-RoadSmartech 2WD off-road And for many other brand's 1/6 carsNot suitable for:FG Leopard2 2+4 WD Sportsline and CompetitionOn several pictures the pipe is shown with a silicone tube tailpipe extension, which is not included. It can be ordered separately as an accessory with part number 6299/03 or y0995.Content:1 piece

€249.95*

5115 FG 3-unit tuning pipe 4WD, 1:5

Genuine FG spare/option part. Standard tuning pipe for 4WD Sportsline Touringcar 1:5.Contents:1 piece

€123.95*

6277 FG Mounting wire for tuning pipe - 1pce.

For installation of 6275Wire diameter 2 mmLength of leg with eyelet 45 mmLength of other leg 85 mm

€4.80*

79 products found for "reso_0008"

Filter products

rc-car-online - Home