LOS253028 Losi Shock Rebuild Kit, DBXL-E 2.0

€19.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_los253028

EAN: 4058575139256

Product information "LOS253028 Losi Shock Rebuild Kit, DBXL-E 2.0"

Genuine Losi spare/option part.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y0500 mf-RaceLine Cask shaped springs, orange 2,6 mm, 2 pcs.

The famous cask shaped spring by Markus Feldmann. Especially designed for rear suspension applications.Fits all touring car shock absorbers with an outer diameter of 16 mm.Caution: Not suitable for MecaTech Klick shocks.Dimensions:Height: 55 mmCenter diameter (outside): 30 mmInner diameter (top/bottom): 17 mmCable thickness: 2,6 mm

€17.90*

Details

y0488 mf-RaceLine Cask shaped springs, green 2,5 mm, 2 pcs.

The famous cask shaped spring by Markus Feldmann. Especially designed for rear suspension applications.Fits all touring car shock absorbers with an outer diameter of 16 mm.Caution: Not suitable for MecaTech Klick shocks.Dimensions:Height: 52 mmCenter diameter (outside): 30 mmInner diameter (top/bottom): 16 mmCable thickness: 2,5 mm

€17.90*

10073/01 FG Tuning clutch spring - 4pcs.

The use of harder clutch springs results in a rising of the operative speed of the clutch blocks for about 1000 revolutions. Suitable for FG 4-block clutch adjustable .

€8.80*

10073 FG Pressure spring for clutch blocks - 4pcs.

Item N° 10073 Pressure spring for clutch blocks - 4pcs.Spare part for all 4-block clutches.Dimensions:Length: approx. 11,2 mmDiameter: approx. 8,5 mmWire thickness: approx. 1,5 mm

€8.90*

DBXL017 ATOP Aluminum front chassis brace for DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€29.90*

DBXL018/019 ATOP Aluminum rear chassis brace 1+2 for DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace 1 + 2 for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 set

€69.90*

Similar products

LOS252067 Losi Diff Rebuild Kit, Al Diff Housing, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€29.99*

LOS252120 Losi Axle Boot Set 5mm Drive Pins DBXL-E 2.0

Genuine Losi spare/option part. Contents:10 pieces

€29.99*

LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD

Genuine Losi spare/option part. Content:4 pieces

€59.99*

LOS254010 Losi Hinge Pin, Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€19.99*

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*