129 products found for "kleb_0005"

Catalogue #1

y0113 Thread locking compound

kleb_0005 Strength: y0113/01 Medium

Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 10 Gramm (€790.00* / 1000 Gramm)

€7.90*

y19281 HT Tire adhesive 4000, 1pce.

Item N° y19281 HT-tire adhesive 4000, 1pce.1 piece / 20 grammsHT-tire cement, specially formulated for rubber/plasticContent:20 gr bottle

Content: 20 Gramm (€345.00* / 1000 Gramm)

€6.90*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

y19015 Bindulin Dichtfix (untill 180°!)

Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*

y0115 Accellerator - 1pce.

For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.

Content: 15 Milliliter (€593.33* / 1000 Milliliter)

€8.90*

GW71 - GRP 1:6 Buggy "BULDOG" Reifen ungeklebt, 2 St

grp_w71_ungeklebt Rubber compund: Extra Soft - GW71X

Item N° GW71 GRP 1:6 Buggy "BULDOG" Reifen ungeklebt, 2 St.Tires will be delivery with inlays and without rims. - Medium aggressive knobby tread - Good directional stability - Good lateral traction - Good propulsion - For solid surfacesTires are not glued!Tire diameter: 164 mmTire width: 61 mm

€32.40*

40005 Parma Faskolor Airbrush Color - green

Genuine Faskolor spare/option part. Parma Faskolor is a non-toxic water based lexan color, specially formulated for airbrush application. Nevertheless it is also possible to paint small parts with a normal brush.The color is very resistant to cracking, chipping and peeling.Contents:1 piece / 60 ml

Content: 60 Milliliter (€118.33* / 1000 Milliliter)

€7.10*

E540005 UFRC A-arm brace front suspension, rear

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€41.90*

Brake rotor, Baja premium brake, 2 pcs., y0005

Diameter 70 mm24 mm hex

€23.50*

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC

Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver

€64.99*

300058587 Tamiya 1/10 RC Neo Fighter Buggy DT-03, assembly kit

Awarded the spiel gut® seal of approval for particularly good and long-lasting toys.With the Neo Fighter, TAMIYA presents the successor to the absolute bestseller among the 2WD RC buggies, the legendary Super Fighter G. This new entry-level racer offers optimal conditions for driving fun on any terrain. The model is particularly impressive in terms of quality and robustness, as it is also the standard model for the TAMIYA FIGHTER-CUP, the world's largest RC youth racing series.The 1:10 scale Neo Fighter, which weighs just over 1 kg, has become slightly longer at a good 40 cm and, thanks to the now larger wheelbase, offers even more directional stability when driving quickly. Its narrow, almost tubular DT-03 chassis contains well-protected electronics and mechanics. Independent suspension, differential, oil-filled shock absorbers and the flexible polycarbon body, which incorporates design elements from classic models, are standard. The highlight is the sensitively controllable electronic speed controller.Required accessories:PS paint, batteries and charger, RC system with servo2WD kit model, DT-03 chassis, electronic speed controller, 540 torque-tuned motor, polycarbonate body, oil pressure damper, rear pin-spike tires, front grooved tires, independent wheel suspension front/rear, rear axle with differential, instructions. Technical details: Impact-resistant tub frame chassis DT-03 Front impact protection Double wishbones Independent front and rear suspension Oil pressure shock absorbers 2WD rear wheel drive Differential gear Polycarbonate body Electric motor type 540 Torque Tuned electronic speed controller Pin spike tires at the rear Grooved tires at the frontTechnical data: Scale 1:10 Length 400 mm Width 248 mm Height 132 mm Wheelbase 287 mm Track v/h: 221/208 mm Wheel dimension WxØ: v 27x80 h 41x86 mm Warnings:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer.Only use tools for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glue (not included in the kit), note and follow the instructions provided there.Keep the kit away from small children. Prevent children from putting any components in their mouths or putting plastic bags over their heads.

€96.90*

LOS350005 Losi Front Hood section, Clear, 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece

€119.99*

Reifen geklebt

€12.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

6571 FG model decal

Genuine FG spare/option part. FG stickers such as FG Logo, Team FG Modellsport, FG ORIGINAL TUNING PARTS a.s.o. for light and dark model paintings. Suitable for all FG models.Content:2 sheets, 240 x 170 mm each

€11.90*

y3001 Light cover decals, set #2

Suitable for the lights on off-road cars like Losi 5ive-T or HPI Baja cars and also for embellishment of other body shells.Dimensions:Diameter: 32 mmContentt:Four teeth orange smiliesFour dead yellow smiliesFour red scullsFour green rc srokes

€4.90*

6225/06 FG Maxi-grip knobbed tires glued

Genuine FG spare/option part. The Maxi-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces

From €89.90*

Details

y1016/111 Starter decal G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€3.90*

6419/09 FG Slick tires rear S1/80mm 1:6 glued, 2 pcs.

Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 80 mmRim with 18 mm square drive.

€118.95*

This product is currently not available.

6225/05 FG Super-grip knobbed tires glued

fg_6225_05 Version: 6225/05M FG Super-grip knobbed tires glued, medium

Genuine FG spare/option part. The FG Super-Grip tires are available in a medium or soft hardness compound. The Super-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces

€85.00*

6417/09 FG Slick tires S/63mm 1:6, glued, 2 pcs.

€107.95*

6228/07, FG Monster Truck tires M/ glued, 2 pcs.

These Monster tires have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount these tires you need a 18 mm wide square wheel driver. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 210 x 115 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€115.95*

y0728/06 GRP tires sponsor decals

Sponsor decal set from GRP with five GRP lettering.Measures:Width: 150 mmLength: 140 mm

€4.90*

6163 HPI Servo Tape 20x100mm

Servo tape, simply that, tape for your servo and while this is an existing HPI Racing option part, you always seem to be bumming it off your friends. So it's time you stock up to repay debts in those field-service emergency fun situations.Contents:10 pieces

€5.99*

Maxi-Pin 1/6 offroad competition tire, mounted and glued

maxipin_geklebt Rubber compound: hard y1232

Genuine HT spare/option part. The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surfaceincreased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.Content:Diameter: 155 mmWidth: 67 mmPrices of the components:Maxi-Pin tires: 39,90 EUR / pairMaxi-Pin tire inserts: 9,90 EUR / pairRims FG 6105/01: 14,90 EUR / pairGlue set y0067: 13,30 EURTotal EUR 78.80Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.Contents:2 pieces / 1 pairAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€49.90*