46 products found for "kami_510056"

rc-car-online - Home

510058, Nuts & bolts set, assy 3

Includes all screws, nuts and washers for installation of the bearing blocks and brakets for the second layshaft.

€12.80*

TLR351005 TLR Aluminium rear chassis brace 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€39.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TLR251005 TLR Gas Tank Complete 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 set

€74.99*

10056 FG Main gilmer belt pulley 48 teeth - 1pce.

Fits formula 1 cars only.

€44.90*

LOS251002 LOSI MINI WRC Front Cage

Genuine Losi spare/option part. Contents:1 piece

€12.99*

Details

TLR251009 TLR Battery Cover Heat Shield 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€14.99*

10054 FG Differential gilmer belt pulley 42T - 1pce.

Fits formula 1 cars only.

€36.90*

10050 FG Clutch gilmer belt pulley 18 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10052 FG Clutch gilmer belt pulley 20 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

ARA520056 ARRMA dBoots BACKFLIP Tire and Inserts for Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€64.99*

E540056 UFRC Layshaft

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€12.90*

LOS251009 Chassis Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 piece

€179.99*

6598 FG Analog servo T1005

Genuine FG spare/option part. Powerfull servo for 2WD and 4WD 1/5 and 1/6 cars. Ballraced, with metal gears.Technical data:Voltage : 6.0-7.4VSpeed : 0.14s-0.12s/60°Torque: 9-10kgcmDimensions : 40.8 x 20.1 x 38 mmWeight : 56 gContents:1 piece

€51.90*

10059 FG Toothed belt 148x16mm

Genuine FG spare/option part.Suitable for formula 1 cars only.Contents:1 piece

€27.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1310 Hitec HS-1005SGT/HS-1100WP small mounting set for Losi 5ive-T, 2.0, 5ive-B and Mini

Fits 5ive-T 2.0 as well!Set includes:y1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/01 Aluminum servo mount A Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/02 Aluminum servo mount B Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1309 All steel linkage steering servo/servo saver applicationy1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.This extremely strong servo horn is specifically designed with dimensions for the installation of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high-performance servo in the Losi 5ive-T and Mini for steering application, but it can be used in other cars with this kind of servo.It bolts directly to the servos stock aluminum disk.The lever of this arm is longer than that of the servo saver. This gives you faster actuating speed of the steering.A linkage with a double-sided arm can only be done properly if all corresponding levers are the same length and the linkages run exactly parallel. If this is not the case, the servo and servo saver shaft will try to change the distance to each other with every steering movement . Thus, undesirable constraining forces.For this reason we decided to give preference to the single-sided arm.Scope of delivery:1 x Aluminium servo horn4 x Socket head cap screws 3 x 14 mm1 x Socket head cap screws 4 x 30 mm1 x Self-lockinghexagon nut M44 x Shim ring 3,2Contents:1 piecey1308/01 + y1308/02 Aluminum servo mounts Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.These servo mounts allow for a simple and strong mounting of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high power servo for steering application.The massive servo mounts bolt to the chassis using existing mounting holes. The mount for the stock servo has to be cut off the radio plate. The aluminum servo mounts feature a pair of additional mounting holes to install a stock servo should ever the need arise. The rear mount bolts to the radio plate as well, providing additional support for the plate.Scope of delivery y1308/01:1 x Mount A2 x Socket head cap screws 3 x 16 mm2 x Countersunk screw 4 x 14 mm2 x Shim ring 4,2 mmScope of delivery y1308/02:1 x Mount B1 x Socket head cap screw 3 x 25 mm1 x Socker head cap screw 3 x 16 mm2 x Countersunk screw 4x14 mm2 x Shim ring 3,2 mmContents:1 sety1309 All steel linkage for Losi 5ive-T and Mini steering servo/servo saver applicationGenuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€139.90*

y1308 Aluminum servo mounts Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and Mini

y1308 Version: y1308/02 Mount B+ 7.5EUR

Genuine HT spare/option part.These servo mounts allow for a simple and strong mounting of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high power servo for steering application.The massive servo mounts bolt to the chassis using existing mounting holes. The mount for the stock servo has to be cut off the radio plate. The aluminum servo mounts feature a pair of additional mounting holes to install a stock servo should ever the need arise. The rear mount bolts to the radio plate as well, providing additional support for the plate.Scope of delivery y1308/01:1 x Mount A2 x Socket head cap screws 3 x 16 mm2 x Countersunk screw 4 x 14 mm2 x Shim ring 4,2 mmScope of delivery y1308/02:1 x Mount B1 x Socket head cap screw 3 x 25 mm1 x Socker head cap screw 3 x 16 mm2 x Countersunk screw 4x14 mm2 x Shim ring 3,2 mmContents:1 set

Variants from €44.90*

€52.40*

y0056 HT - Carson Wild GP Attack and HPI Baja 5B/SS/5T/5sc premium front disk brake

Normal price: 249,90 EUR Tuning front disk brake system for the HPI Baja 5B/SS/5T/5sc, the conversion kit includes all necessary parts. The brake includes the finest parts available for a cable brake and has the following features: * uses existing mounting points for all parts * brake pads and 70 mm diameter stainless rotors made by RS-5, the best performing combination available * hardened stud bolts for the brake pads * billet brake levers, no tweak and best transfer of servo power * ultraflex bowden cables * brake cams run in hardened steel bushings and brass guide plates (miniature bearings don't last in offroad cars) * billet alloy bowden cable support block with adjustment screws * billet alloy bowden cable mounts at the calipers * pre-assembledOn a 5T the stud bolts which hold the brake pads will interfere with the ribs in the rim. However, modifying the rim or swapping the stud bolts for long csh screws allows for installation on a 5T.Spare parts for this brake as a PDF-file with spare part numbersWe highly recommend the installation of a stronger throttle servo to take full advantage of this brake system. The is an excellent choice.

€239.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

B61005/51020/51021 Servo saver plastic parts

Dimensionally identical with Losi 5ive-T 1.0 part LOSB2550..Contents:1 set

€16.90*

TLR251008 TLR Radio Tray Covers 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 set

€16.39*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

LOS251000 LOSI MINI WRC Left Cage Side

Genuine Losi spare/option part. Contents:1 piece

€28.99*

LOS251007 Roll Cage, Complete Losi DBXL

Genuine Losi spare/option part.

€119.99*

ARA610050 ARRMA Ball Bearing sealed 6x10x3mm 2RS

Genuine ARRMA spare/option part. Contents:4 pieces

€13.99*

LOS251001 LOSI MINI WRC Right Cage Side

Genuine Losi spare/option part. Contents:1 piece

€28.99*

y1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP

Genuine HT spare/option part.This extremely strong servo horn is specifically designed with dimensions for the installation of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high-performance servo in the Losi 5ive-T and Mini for steering application, but it can be used in other cars with this kind of servo.It bolts directly to the servos stock aluminum disk.The lever of this arm is longer than that of the servo saver. This gives you faster actuating speed of the steering.A linkage with a double-sided arm can only be done properly if all corresponding levers are the same length and the linkages run exactly parallel. If this is not the case, the servo and servo saver shaft will try to change the distance to each other with every steering movement . Thus, undesirable constraining forces.For this reason we decided to give preference to the single-sided arm.Scope of delivery:1 x Aluminium servo horn4 x Socket head cap screws 3 x 14 mm1 x Socket head cap screws 4 x 30 mm1 x Self-lockinghexagon nut M44 x Shim ring 3,2Contents:1 piece

€39.90*

46 products found for "kami_510056"

Filter products

rc-car-online - Home