448 products found for "kabelbaum_buchse"
rc-car-online - Home
y0481 y0481 Diverse Zenoah Label, 1 St.:
y0481/03 G260RC Zenoah Label
Glossy Zenoah stickers.
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.
Genuine FG spare/option part. The following items are required for completion: body mounts, body.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. The models are equipped with front disk brakes for an optimal braking power. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, central brake with oversized disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. The body parts are made of clear polycarbonate. Tires are glued on the rims. The models are driven by a 23ccm engine with a powerincreasing tuned pipe. The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problem. The tank capacity enables you to run your model around 45 minutes.RTR version: Radio system 2.4GHz Steering metal gear servo 25kg Gaz/Throttle servo 10kg Radio supplied with 8 stick battery and one chargerDimensions : Length 800 - 900 mm Width 392 mm Height ca.250 mm Wheelbase 530 mm Weight 10,2 kg
FG introduces the first full-blooded fourwheel-driven Touring and Sports cars within the Sportsline series. With a wheelbase of 510mm and 530mm these 4WD chassis fit almost all FG bodyshells. Equipped with a technical high-grade chassis, a powerful 26 cm³ engine with tuning pipe, snap-closure fuel tank, differential gear, front disk brake and a lot more. This chassis offers maximal traction as well as easy handling, simply pure driving fun. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The FG Sportsline class with its detailed bodyshells is not only a visual highlight. These models convince through their sophisticated chassis. With a double wishbone suspension offering adjusting possibilies for toe-in, wheel camber and caster as well as a robust four-wheel drive which gives the model neutral driving characteristics. We placed special importance on durability through using solid materials and on suitability also for beginners in this hobby. The FG Sportsline class is the reasonably priced but still top-quality entry into the RC car sports sector. Equipped with a strong 26 cm³ engine, tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. However, highlight remains the approved FG four-wheel drive. Maximum traction as well as easy handling, grip in the curves - these are the advantages only offered by a four-wheel drive.Dimensions: Total length: 940 mmChassis length: 780 mm Width: 392 mm Height: 240 mm Wheelbase: 530 mm The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.Touring cars in action!Painting tips:
Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece
Genuine FG spare/option part. The following items are required for completion: body mounts, body, RTR (radio control, servos, batterie and charger).The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. The models are equipped with front disk brakes for an optimal braking power. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, central brake with oversized disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. The body parts are made of clear polycarbonate. Tires are glued on the rims. The models are driven by a 23ccm engine with a powerincreasing tuned pipe. The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problem. The tank capacity enables you to run your model around 45 minutes.We deliver the RTR version with mounted and preset radio control system.Dimensions : Length 800 - 900 mm Width 392 mm Height ca.250 mm Wheelbase 510 mm Weight 10,2 kg
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:
Genuine FG spare/option part. The following items are required for completion: body mounts, body.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. The models are equipped with front disk brakes for an optimal braking power. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, central brake with oversized disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. The body parts are made of clear polycarbonate. Tires are glued on the rims. The models are driven by a 23ccm engine with a powerincreasing tuned pipe. The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problem. The tank capacity enables you to run your model around 45 minutes.RTR version: Radio system 2.4GHz Steering metal gear servo 25kg Gaz/Throttle servo 10kg Radio supplied with 8 stick battery and one chargerDimensions : Length 800 - 900 mm Width 392 mm Height ca.250 mm Wheelbase 530 mm Weight 10,2 kg
Genuine FG spare/option part. The following items are required for completion: body mounts, body, RTR (radio control, servos, batterie and charger).The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. The models are equipped with front disk brakes for an optimal braking power. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, central brake with oversized disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. The body parts are made of clear polycarbonate. Tires are glued on the rims. The models are driven by a 26ccm engine with a powerincreasing tuned pipe. The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problem. The tank capacity enables you to run your model around 45 minutes.Dimensions : Length 800 - 900 mm Width 392 mm Height ca.250 mm Wheelbase 510 mm Weight 10,2 kg
Genuine FG spare/option part. Fits on all standard width touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. The vehicle decal sheet can be purchased separately in our shop selection.Required body mounts:Mount front: FG 7020/16Rear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsFront body: 4171 FG Front body Audi R8 clearRear wing: 4172 FG Rear wing Audi R8 clearVehicle decals: 4173/01 FG Vehicle decals Audi R8 LMSDimensions:Length: 920 mmWidth: 385 mmHeight: 220 mmWheelbase: 535 mmContents:1 set
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm
Genuine FG spare/option part. The following items are required for completion: body mounts, body, RTR (radio control, servos, batterie and charger).This model is based on the Sportsline 4WD chassis modified for drift driving.It features an aluminium engine mount and crown gear, short gear ratio, universal drive shafts, harder suspension, special slick tires.Option parts included : Aluminium engine mounts (large and small) 66215 - 06485/01 Front universal shaft set 68415 Aluminium gear carrier 07439 Steel brake square 06042/05 Drift Wheels 08939Dimensions : Length : 830mm Width : 405 mm Height : 260 mm Wheelbase : 510 mm Weight : 10,2 kg
Genuine FG spare/option part. The following items are required for completion: body mounts, body, LiPo driving batteries and charger.Developing a chassis with highest driving dynamics and best performance was our target here, too. Maximal traction as well as simple handling, best grip in curves, these are the advantages only an all-wheel-driven model can offer.The 4-wheel transmission is based on a low-wear gear belt and 2 differentials. Fully adjustable front and rear double wishbone suspensions. Oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.With this robust, reliable and high-performance chassis equipped with a powerful 4200W brushless motor, with power supplied by 2 battery packs 2S (on special request 2 x 3S possible), you will be able to initiate yourself silently to the pleasure of driving. RTR version : RC System 2.4GHz Steering servo 26 kg Brushless engine 1300KV 150A controller
The legendary sports car Bugatti EB 110 body shell for 1:5 on-road cars with standard chassis width and 530/535 mm wheelbase. The body shell is vac-formed from 2 mm Lexan.Dimensions:Total length approx. 870 mmTotal width approx. 380/385 mmTotal height approx. 220 mmRequired body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7154/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts The body support FG 7154/01 is screwed directly onto the rear bridge. For attachment to the rear bridge, 2 holes 4 mm must be drilled in them.As a detailing kit (mirrors, windshield wipers!) set # 5435 is recommended (not included!).Since the Bugatti EB 110 1:5 scale body is - just like the original very low, a very low height air filter (#9043) is required. We also recommend 9.5 mm wide wheel squares: #6107 wheel squares 9.5 mm/M6 - 2pcs..For the body side support 32781.
Genuine FG spare/option part. The following items are required for completion: body mounts, body.This model is based on the Sportsline 4WD chassis modified for drift driving.It features an aluminium engine mount and crown gear, short gear ratio, universal drive shafts, harder suspension, special slick tires.Option parts included : Aluminium engine mounts (large and small) 66215 - 06485/01 Front universal shaft set 68415 Aluminium gear carrier 07439 Steel brake square 06042/05 Drift Wheels 08939Dimensions : Length : 830mm Width : 405 mm Height : 260 mm Wheelbase : 510 mm Weight : 10,2 kgRTR version : Radio system 2.4GHz Steering metal gear servo 25kg Gaz/Throttle servo 10kg Transmitter batteries and receiver battery. Charger for both battery types.
Item N° 68510 Electric conversion kit 1:6 2WD for 465 Wheelbase, setSuitable for 2WD Buggy and Monster models as Marder, Beetle, Monster-Truck, Hummer, Jeep a.s.o with 465 mm wheelbase.This conversion kit is suitable for the 2WD FG models Marder, Beetle, Off-Road Buggy and Monster models with 465mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries. Cruise control, BL engine and LiPo batteries are not included. During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine.For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.
Genuine FG spare/option part. The Set contains the front body, the main body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.EFRA number: 5052/06The set is delivered not painted. The body is not drilled and fits all fabricate.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmContents:1 piecePainting tips:
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
Genuine Mecatech spare/option part. The six conical grooves (directly machined in the body), allow a progressive hardening of the suspensions and the car becomes more stable and more safe on the curbs. Contents:2 pieces
Genuine FG spare/option part.The following items are required for completion: body mounts, body, LiPo driving batteries and charger.Developing a chassis with highest driving dynamics and best performance was our target here, too. Maximal traction as well as simple handling, best grip in curves, these are the advantages only an all-wheel-driven model can offer.The 4-wheel transmission is based on a low-wear gear belt and 2 differentials. Fully adjustable front and rear double wishbone suspensions. Oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.With this robust, reliable and high-performance chassis equipped with a powerful 4200W brushless motor, with power supplied by 2 battery packs 2S (on special request 2 x 3S possible), you will be able to initiate yourself silently to the pleasure of driving.RTR version : RC System 2.4GHz Steering servo 26 kg Brushless engine 1300KV 150A controller
Genuine FG spare/option part. The following items are required for completion: body mounts, body, RTR (radio control, servos, batterie and charger).The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. The models are equipped with front disk brakes for an optimal braking power. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, central brake with oversized disk, oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. The body parts are made of clear polycarbonate. Tires are glued on the rims. The models are driven by a 23ccm engine with a powerincreasing tuned pipe. The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problem. The tank capacity enables you to run your model around 45 minutes.Dimensions : Length 800 - 900 mm Width 392 mm Height ca.250 mm Wheelbase 530 mm Weight 10,2 kg
Contains the vehicle specific decals for an original appearance.The set consists of a total of three different decal sheets.For body shell no. y1518 and y1562.Content:1 set
Fits on 2WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Due to the low body shell, you need the low height FG airbox # 9043.Complete painted for 1/5 scale for 530/535 mm wheelbase. With rear wing, mirrows and decals.Required body mounts: Mount front: FG 7020/14 Frontrammer Rear body mount: FG 7155 Karosserieauflage hinten Side body mount front: FG 3014 Karosseriehalter Side body mount rear: FG 3014 Karosseriehalter Contents:1 piece