Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

87566 HPI VVC/ HD Shock maintenace set

Product information "87566 HPI VVC/ HD Shock maintenace set"

Genuine HPI spare/option part. 

Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

86666 HPI Damper bushing
Genuine HPI spare/option part. Contents:4 pieces

€14.99*

Average rating of 0 out of 5 stars

y0092 Alloy starter pawl, CNC-machined
Genuine HT spare/option part. New billet version, CNC-machined!Fits Zenoah G230/240/260/270/290/320, Losi, HPI Fuelie and CY engines. Not as easily damaged as the stock plastic unit.Does not fit PT (Carson/Smartech) engines!Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

Average rating of 0 out of 5 stars

y19302/01 Flywheel and Clutch puller CY, Zenoah, HPI, Losi
Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

y86479 HighElastic driveshaft boots 47 mm, choice of colors, 4 pcs.
y86479 Color: y86479/01 - Black
Highly flexible driveshaft boots, equivalent to HPI part # H86479.Available in the following colors:y86479/01 - blacky86479/02 - redy86479/03 - orangeContents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

7375 FG Carburetor screw for CY / Zenoah / Fuelie
Genuine FG spare/option part.4-40 UNC x 1/8"Part is delivered in silver or black color from vendor!Content:1 piece

€3.90*

Similar products

Average rating of 0 out of 5 stars

87470 HPI Fuel line
Genuine HPI spare/option part. Contents:1 set

€32.90*

Average rating of 0 out of 5 stars

87456 HPI Brake pads Baja 5B
Genuine HPI spare/option part. Contents:2 pieces

€20.99*

Average rating of 0 out of 5 stars

87551 HPI Rear shock mount plate + 12 mm Baja SS
Genuine HPI spare/option part. Color: grey.Contents:1 piece

€30.69*

Average rating of 0 out of 5 stars

87469 Fuel tank cap Baja 5B
Genuine HPI spare/option part. Contents:1 piece

€16.90*

Average rating of 0 out of 5 stars

87461 HPI Differential plates
Genuine HPI spare/option part. Contents:1 set

€21.98*

Average rating of 0 out of 5 stars

87468 HPI Fuel line yellow
Genuine HPI spare/option part. Length: 50 cm.Contents:1 piece

€10.98*

Average rating of 0 out of 5 stars

87563 HPI Front shock repair kit VVC/HD Baja SS
Genuine HPI spare/option part. Dimensions: 127 - 187 mm.Contents:1 set

€71.50*

Average rating of 0 out of 5 stars

87464 HPI Aluminium Threaded shock 127-187 mm Baja 5B
Genuine HPI spare/option part. Genuine HPI quality spare part for easy maintenance and repairs. A fully built pair of front shocks for the Baja 5B. Featuring externally adjustable pistons, threaded shock body for infinitely adjustable ride height, purple anodized aluminium shock caps and spring collars, and competition-tuned springs, these are the original (OEM) front shocks for the Baja 5B. #Z182 shock oil is necessary to fill the shocks.Dimensions:Mounting hole distance: 187 mmTravel: 60 mmDiameter: 20 mmContents:2 pieces

€142.89*

Average rating of 0 out of 5 stars

87480 HPI Rear lower brace B Baja SS
Genuine HPI spare/option part. Color: orange.Dimensions: 6 x 70 x 4 mm.Contents:1 piece

€8.99*

Average rating of 0 out of 5 stars

87482 HPI Rear chassis plate Baja SS
Genuine HPI spare/option part. Color: orange.Contents:1 piece

€61.49*

Average rating of 0 out of 5 stars

87467 HPI Fuel line black
Genuine HPI spare/option part. Contents:1 piece

€9.88*

Average rating of 0 out of 5 stars

87564 HPI Shock repair kit for VVC/HD rear shocks Baja SS
Genuine HPI spare/option part. Dimensions: 137 - 207 mm.Contents:1 set

€75.00*

Customers also viewed

Average rating of 0 out of 5 stars

86479 HPI Axle boots 22 x 47 mm
Genuine HPI spare/option part. Contents:4 pieces

€8.50*

Average rating of 0 out of 5 stars

87567 HPI Bevel gear set
Genuine HPI spare/option part. For #85427 Alloy diff case.Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

160324 HPI Baja 5B SBK Flux build kit Electric
BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale electric-powered Off-Road Buggy Ready for your 6S or 8S LiPo electronics Streamlined HPI Baja 5B Flux body design Adjustable motor mount Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Enclosed receiver box Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub

€795.00*

Average rating of 0 out of 5 stars

85413 HPI Shock piston for VVC/HD Shock
Genuine HPI spare/option part. Content:1 set

€34.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development