Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

15440 HPI Clutch shoes with spring

Product information "15440 HPI Clutch shoes with spring"

Genuine HPI spare/option part. 

Content:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

15448 HPI High response clutch shoe and spring 7500 RPM/ pink
Genuine HPI spare/option part. Content:1 set

€61.49*

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Average rating of 0 out of 5 stars

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Average rating of 0 out of 5 stars

Mielke 5543 Power Gearshift clutch for FG (except Formula 1+Evo2020), Harm and RS5, carbon, 2,4mm springs with long clutch carrier
The new adjustable system features three carbon pads with special 2.4 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

Accessories / Spare parts

Average rating of 0 out of 5 stars

15448 HPI High response clutch shoe and spring 7500 RPM/ pink
Genuine HPI spare/option part. Content:1 set

€61.49*

Average rating of 0 out of 5 stars

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Similar products

Average rating of 0 out of 5 stars

7340/09 FG Rubber cap for kill switch
Genuine FG spare/option part.Protects the switch against dirt and splashes. Highly recommended for off-road use.Contents:1 piece

€4.50*

Average rating of 0 out of 5 stars

7305/08 FG Crankcase gasket for CY / Zenoah
Genuine FG spare/option part.For Zenoah G230/240/260/270/290 enginesApplications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.90*

Average rating of 0 out of 5 stars

6061 Mielke pull starter with hybrid starter function
Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

Average rating of 0 out of 5 stars

7379/08 FG Choke lever for CY / Zenoah / Fuelie
Genuine FG spare/option part.Contents:1 piece

€4.50*

Average rating of 0 out of 5 stars

6062 Mielke clutch nut for E-start shaft
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

75106 HPI Body clips 6 mm, black
Genuine HPI spare/option part. Fits a huge range of RC cars and trucks, and conveniently packaged in packs of 20 for quick replacement. Cool black colour to match every paint scheme.Content:20 piece

€5.99*

Average rating of 0 out of 5 stars

15478 HPI Pull starter 1/5
Genuine HPI spare/option part. Content:1 piece

€59.90*

Average rating of 0 out of 5 stars

15416 HPI Air filter Foam element Set for 15411
Genuine HPI spare/option part. This is a set of foam elements to complete the air filter on the Baja 5B. Be sure to follow the installation instructions in the Baja manual when installing these on your Baja!Contents:3 pieces

€21.99*

Average rating of 0 out of 5 stars

6925/14 FG Pan-head screw with Torx M4x14 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.90*

Average rating of 0 out of 5 stars

7338 Insulated carburetor spacer for CY / Zenoah / Fuelie
Genuine FG spare/option part. Made from T7075 aluminum with wide epoxy insulator plates to protect against engine heat transfer. Venturi-shaped bore increases engine performance.For easier installation removing the cylinder shroud is recommended .Contents:1 Set

€59.50*

Average rating of 0 out of 5 stars

85444 HPI Air filter sleeve for 15411
Genuine HPI spare/option part. Content:1 set

€16.00*

Average rating of 0 out of 5 stars

6061/01 Mielke Zenoah Hybrid starter, pullstart unit only
Genuine Mielke spare / option part.Spare part for Mielke 6061.Contents:1 piece

€69.90*

Customers also viewed

Average rating of 0 out of 5 stars

6479/01 FG Rear alloy 08 upright, left, 1 pce.
Item N° 6479/01Rear alloy 08 upright, left, 1 pce.Spare part for FG no. 6479.

€59.95*

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Average rating of 0 out of 5 stars

86618 HPI Stabilizer bar
Genuine HPI spare/option part. Fine-tune your racing Baja 5B performance with this front and rear Sway Bar Set! Featuring everything you need to fully outfit the Baja 5B with sway bars, you don't need to buy anything extra to get maximum tuning ability out of your dune buggy. You get all the installation hardware, with screws, nuts, pivot balls and more included with the set.Three matched swaybars are included for the front end, so you can tune the steering and handling of the Baja. Three more swaybars for the rear come with the set also, allowing you to tune the rear grip. With this Sway Bar Set installed, you will be able to get maximum handling out of your Baja, letting you get better performance and lower lap times! Check out the full line of Baja 5B tuning parts available from HPI Racing!Contents:1 set

€59.90*

Average rating of 0 out of 5 stars

y1419/01 Clutch spring 6.000 1 / min for the Sintered clutch for Zenoah, Chung Yang, Losi, HPI & Co.
Clutch spring for about 6,000 1 / min. for the OEM clutches from Zenoah and many other rc-car engines from 23 cm³ - 32 cm³.Content:1 piece

€5.90*

Average rating of 0 out of 5 stars

68100ER FG Short Cross Electric 2WD RTR, painted body ‘New’
‘NEW 2025’  FG Short Cross Elekto 2WD model with RTR. Pro trucks or short course are becoming increasingly popular in the world of motor racing. They are monstrous, powerful cars with long suspension travel that make spectacular group races possible. The ‘Short Cross’ has reliable mechanics that are fitted with stiffeners and protective flaps. There is also a conversion kit with which you can convert your Short Cross 2WD into a 4WD. A highly detailed polycarbonate body fits perfectly to the chassis. The RTR version is also equipped with a servo and 2.4 GHz transmitter.  Our battery recommendation - use 2 3S Li-Po batteries.Technical data:  - Motor 1100 KV, 3600 W up to 6S - 160A ESC/controller  - 4 mm anodised chassis with side protection  - Differential with bevel gears  - Completely mounted on ball bearings  - Big Bore aluminium shock absorbers  - Front and rear double wishbones adjustable in caster/toe-in/camber  - New short course tyres and high-sided rims in M and S hardness. - Matt-black painted and finished bodyFor completion you need :  - Batteries,  - charger  Dimensions and weight:  - Length 770 mm  - Width 480 mm  - Height 320 mm  - Wheelbase 485 mm  - Weight approx. 9 kg1 pieces

€997.50*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development