Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories
Complete ball bearing set for all FG 2WD cars (your choice of plastic or alloy diff case).The set includes:- #6078, wheel bearing, 8 pcs., 8x22x7 mm- #6040, clutch bell bearing, 2 pcs., 10x22x6 mm- #6036, layshaft bearing, 2 pcs., 10x19x7 mm- #6063 or #8493, diff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.
The T7PXR is a 7-channel 2.4GHz computer remote control system with the modulation modes T-FHSS SR / T-FHSS / S-FHSS and FASST(C2). The transmitter convinces with a new design, new keypad and high quality carbon elements.Overview of modulation modes: T-FHSS-SR, 4 channels without telemetry, but with maximum response speed T-FHSS, 4 channels with telemetry S-FHSS, 7 channels without telemetry FASST, 4 channels without telemetry The new T-FHSS SR (Super Response) system is faster than all previous transmission methods on the market. With 2.45 ms, the response speed of the model has become noticeably faster (T-FHSS = 4.15 ms).Optical center of the T7PX is the backlit 4.3 inch TFT color touch display with brilliant colors and high sharpness. Even in direct sunlight, all settings on the display are easy to read. The graphically guided user interface with the well-known easy Futaba menu structure ensures easy operation. Navigation is intuitive via the screen and the additional buttons on the transmitter top.Synchronized, bidirectional communication between transmitter and receiver with high telemetry data rate (up to 9 times per second), without loss of response of the control channels. mMximum of 31 telemetry sensors, alarm sound setting and output via beeper, vibration alarm or voice output via internal speaker or optional headphones/active speaker TELEMETRY FUNCTIONS Telemetry data recording on SD card (SDHC) Telemetry data analysis via spreadsheet programs or LogView software Real-time display of telemetry data on integrated display Receiver signal strength indicator for monitoring the range Receiver low voltage warning system for monitoring the receiver battery Connection of up to 31 sensors at the S.BUS2 input for e.g.: voltage of the drive battery Current up to 150A Speed (brushless or magnetic) Temperature (125°C or 200°C) Speed (GPS sensor) Castle TL0 S.BUS TECHNOLOGY Connection possible for S.BUS2 sensors All S.BUS servos can also be connected to normal servo outputs of the receiver Digital BUS technology for model sports Allows ideal placement of all components with efficient wiring Future-proof digital technology for all future Futaba components Recommended servo: Futaba BLS571SV Recommended receivers: Futaba R334SBS or R334SBS-E (only for electric models) Hint:To take advantage of the Futaba SR system's speed, many FUTABA SV servos can be switched to SR mode via T7PX transmitter. Currently the following servos are SR compatible: BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SVi, BLS373SV, S9372SV and S9373SV.FEATURES 7-channel computer remote control system with T-FHSS SR / T-FHSS / S-FHSS / FASST(C2) 2.4 GHz technology New design with new keypad and carbon elements Anodized titanium screws Telemetry function (T-FHSS only) Prospective NFC function for contactless updates with Android devices Backlit 4.3 inch color touch display Built-in speaker 40 internal model memories, expandable via SD card Adjustable trigger (ergonomic) Adjustable steering wheel position, additionally reinforced Dual Rate & Exponential Function Lap time measurement ABS Function Memory Reset and Copy Model name up to 15 characters Failsafe setting for channels 1-4, B-F/S for throttle function Normal and high-speed transmission mode Fastest response times with digital servos Free selection of the assignment of switches and encoders Graphical servo travel display Technical data Channels: 4 / 7(for S-FHSS) Transmission system: T-FHSS SR / T-FHSS / S-FHSS / FASST(C2) Frequency band: 2.4 GHz HF transmission power: 100 mW EIRP Response speed: 2.40 ms Power supply: 6.0 - 7.4 V Weight: approx. 580 g
€649.90*
This product is no longer available.
This website uses cookies to ensure the best experience possible. More information...