7204 FG alloy shock absorber 04 long

€69.90*

Available

Product number: fg_7204

EAN: 3410564515693

Product information "7204 FG alloy shock absorber 04 long"

Genuine FG spare/option part.

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier.

Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark.

The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter. Installation length

Extended: 139 mm
Travel: 38 mm

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1358 PTFE thread sealing tape, 12 mm wide, 10 m roll

Perfect for sealing threads.Resistant against almost all chemicals.Dimensions:Width: 12 mmThickness: 0.075 mmLength: 10 meters

€2.90*

y6092/01 Adapter set 20 mm shock springs on 16 mm shocks

With these adapter rings you can use springs with 20 mm inner diameter on shocks which are made for 16 mm springs.The set includes two each adapter rings with with the dimensions below and 20 mm spring perches #y6092.Dimensions:Inner diameter: approx. 16.10 mmFlange outer diameter: ca. 24.75 mmHub outer diameter: approx. 19.95 mmFlange height: approx. 1.55 mmOverall height: approx. 5.55 mm

€24.90*

y0038 Oil for shock absorber, all viscosities, 50 ml

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€179.00* / 1000 Milliliter)

€8.95*

Details

y0039 Oil for shock absorber, all viscosities, 100 ml

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€154.00* / 1000 Milliliter)

From €12.90* €15.40* (16.23% saved)

Details

7203/01 FG Damper housing 04 long - 1pce.

Suitable for .

€24.90*

6732/03 FG E-clip spring steel 3,2 mm

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*

7087/01 FG Lower shock retaining short - 2pcs.

Spare part for , , and .

€4.50*

7087/02 FG Lower shock retaining long - 2pcs.

Spare part for , , , , , , , , and .

€4.70*

7088 FG Volume compensation for shock absorber

Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.90*

Details

7089 FG Shock piston

Genuine FG spare/option part.Spare part for 7083, 7200, 7201, 7202, 7203, 7204.Dimensions:Outer diameter: 13.3 mmInner diameter: 4 mmContents:2 piece

€4.50*

7090 FG Shock piston shaft short - 1pce.

Spare part for , , , , , , , , , and .For race actions and also when using high viscous oils we recommend to mount the piston rods with fastening thread for the piston. Through tightening the piston a backlash-free connection with the piston rod is guaranteed. Mount the threaded piston rods only in connection with the alloy damper pistons.Length 55 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€13.90*

7091 FG Shock piston shaft long - 1pce.

Spare part for , , , , , , , , and .Length 67 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€15.90*

7092 FG Spring plate - 2pcs.

Spare part for , , , , and .Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaft

€6.50*

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7095/01 FG O-ring for adjustable ring - 6pcs.

Spare part for , , , , and .

€5.70*

7201/02 FG Upper shock absorber seal 04 - 2pcs.

Suitable for .Bushings for 4 mm shock mounts.

€18.90*

7201/04 FG Lower shock absorber seal 04 - 2pcs.

Suitable for .

€12.95*

7201/05 FG Guiding set

Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€7.50*

7205/05 FG Plastic adjusting rings 16mm, 4 pcs.

Reasonably priced plastic adjusting rings for the FG shock absorbers with 16mm external thread. The plastic material prevents a seizing of the threads.Outer diameter 21.4 mmWidth 6 mm + 2 mm sleeve

€6.90*

7205/06 FG Plastic adjusting rings 16 mm

Genuine FG spare/option part.CNC-manufactured adjusting rings for the 16 mm FG shock absorbers with external thread. Inserted o-ring for securing. The use of plastic material prevents a jamming of the thread.Dimensions:Outer diameter: 22,4 mmWidth: 5 mm + 2 mm sleeveContents:2 pieces

€11.50*

10088 FG Lower damper mount for F1 - 2pcs.

Spare part for and .

€3.90*

Similar products

66293 FG Alloy shock absorber 08 short, 4 mm

Genuine FG spare/option part. Oil-pressure shock absorber Ø20 mm, short version, upper damper mount 4mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the models Marder and Beetle 2WD.Content:2 pieces

€58.95*

66294 FG Alloy shock absorber long 4 mm

Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€67.95*

66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.

Item N° 66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of Off-Road Buggy 4WD, for the rear axle of Off-Road Buggy and Monster models 2WD.

€64.90*

Details

7200 FG alloy shock absorber 04 short

Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces

€67.95*

8522 FG Front shock absorber set short - 2pcs.

Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber, experienced for years. Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmThe set contains 2 shock absorber with spring plate and spacer rings.

€49.50*

7206 FG Damper Evo 2020

Genuine FG spare/option part. Contents:2 pieces

€99.99*

67320 FG Aluminium shock absorber long, Ø24x210mm Leopard 2WD/4WD

Genuine FG spare/option part. Content:2 piecesLeopard 2WD/4WD shock absorber spare part list:

€128.99*

7201 FG Alloy shock absorber 04 medium-short - 2pcs.

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.

€69.95*

66291 FG Alloy shock absorber 08 long, 5 mm - 2 pcs.

Oil-pressure shock absorber Ø20mm, long version, upper damper mount 5mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€64.90*

Details

67330 FG Aluminium shock absorber short, Ø24x168mm Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 version.Contents:1 pieceLeopard 2WD/4WD shock absorber spare part list:

€126.70*

67615 FG Big Bore front Shock Absorber Leopard 2020 4WD

Genuine FG spare/option part. Contents:1 set

€177.50*

67331 FG Big Bore shock absorbers Competition, fit on Leopard Competition chassis

Genuine FG spare/option part. Contents:2 piece

€129.99*