Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4428 FG Steel balljoint Ø4/M4

Product information "4428 FG Steel balljoint Ø4/M4"

Genuine FG spare/option part. 

Steel ball joint with 4mm bore (ball) and M4 right-threaded conncetion. Suitable for front adjustable ball stabilizers 8517 and rear ball stabilizers 8516, F1 stabilizers, steering rods a.s.o., also suitable for other makes.

Dimensions:
  • A = 4 mm
  • B = M4
  • C = 7 mm
  • D = 14 mm
  • E = 31 mm


018c58811d58704fa3dd8ffea20877d8.jpg


Content:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y0529/01RL Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h thread

€10.80*

Average rating of 0 out of 5 stars

y0529/01R Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm r/h, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x r/h thread

€5.90*

Average rating of 0 out of 5 stars

y0529/01L Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm l/h thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x l/h thread

€5.90*

Customers also bought

Average rating of 0 out of 5 stars

y0148 Long carburetor brace
Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece

€19.90*

Average rating of 0 out of 5 stars

7338 Insulated carburetor spacer for CY / Zenoah / Fuelie
Genuine FG spare/option part. Made from T7075 aluminum with wide epoxy insulator plates to protect against engine heat transfer. Venturi-shaped bore increases engine performance.For easier installation removing the cylinder shroud is recommended .Contents:1 Set

€59.50*

Average rating of 0 out of 5 stars

2009-35, Mecatech Klick-Shock fitting, 2 pcs.

€13.50*

Average rating of 0 out of 5 stars

y0273 Opel Vectra team decals Valvoline - set
Valvoline team decals for Opel Vectra body shell.Sheet dimensions:500 x 230 mm (3x)230 x 80 mm

€29.00*

Average rating of 0 out of 5 stars

10450/01 FG Bowden cable for front disk brake for F1 - set
Cable: 465 mmSheath: 385 mmSpare part for .

€19.70*

Average rating of 0 out of 5 stars

8017 FG Brake rod set for 1:5
For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€10.50*

Average rating of 0 out of 5 stars

6028/01 FG Track rod left/right 74mm for 1:6 models
Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

Similar products

Average rating of 0 out of 5 stars

y0529 Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball
y0529 Version: y0529L One piece left hand thread+ 1EUR
Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.

Variants from €5.90*
€6.90*

Average rating of 0 out of 5 stars

y0529/01RL Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h thread

€10.80*

Average rating of 0 out of 5 stars

y1106/01 Aluminum ball joints with 5mm/M8 right-hand thread, 2 pieces
Genuine HT spare/option part. Two balljoints 5mm/M8 right-hand threadThe maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Dimensions:A = 5 mmB = M8 rightC = 8 mmD = 17,5 mmE = 39 mmContents:2 piece

€14.90*

Average rating of 0 out of 5 stars

y0529/02R Steel ball joint M8 r/h or l/h thread, 5 mm bore in ball
One pieces of steel ball joint with 5 mm bore in ball and M8 r/h or l/h thread.Suitable for most every 1/5 and 1/6 car!Replaces FG plastic ball joints # 6029/08 and # 6081/01 in conjunction with the conical spacers # 4429/02.Replaces Smartech # 32409 and # 32446 as well.

€5.90*

Average rating of 0 out of 5 stars

y0529/01R Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm r/h, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x r/h thread

€5.90*

Average rating of 0 out of 5 stars

6027 FG Ball-and-socket joint 6mm with ball
Genuine FG spare/option part. Plastic ball joint Fits all FG cars.Dimensions:Thread size: M4Länge: 20 mmBall bore: 3 mmHeight: 8 mmContents:6 pieces

€15.50*

Average rating of 0 out of 5 stars

y1107 Steel balljoints 5mm/M8, with conical spacers
Genuine HT spare/option part. Two balljoints 5mm/M8 with four conical spacers, to replace FG #6029/1 + balls (Set content like FG 4429/1).Fits almost for all 1/5 and 1/6 scale cars.The maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Contents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

4429/01 FG Steel balljoint Ø5/M8
Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces

€54.50*

Average rating of 0 out of 5 stars

4429/02 FG Steel taper disk 5mm bore
Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces

€11.50*

Average rating of 0 out of 5 stars

6027/05 FG Ball-and-socket joint 6mm for M2 screw thread
Genuine FG spare/option part. Length: 20 mm.Contents:5 piece

€5.90*

Average rating of 0 out of 5 stars

y0529/02L Steel ball joint M8 r/h or l/h thread, 5 mm bore in ball
One pieces of steel ball joint with 5 mm bore in ball and M8 r/h or l/h thread.Suitable for most every 1/5 and 1/6 car!Replaces FG plastic ball joints # 6029/08 and # 6081/01 in conjunction with the conical spacers # 4429/02.Replaces Smartech # 32409 and # 32446 as well.

€5.90*

Average rating of 0 out of 5 stars

4429 FG Steel balljoint
Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

Customers also viewed

Average rating of 0 out of 5 stars

y0529/01RL Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h thread

€10.80*

Average rating of 0 out of 5 stars

FG FG main catalog, edition with 133 pages
Genuine FG spare/option part. Contents:1 piece

€8.70*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency