10639 FG Gear drive for F1 Competition, set

Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

Special offer price!  Including Mecatech Expert hydraulic brake on the front axle.  Vehicle is pre-assembled, with a 26 cm³ combustion engine and almost 100 km/h fast, what more could you want? Another improvement is the hydraulic disc brake in the front wheels. (included, not installed) A crystal-clear polycarbonate body is included. Quality and high-quality equipment at a reasonable price. Technical description of the Formula 1 Sportsline chassis: The chassis of the FG Formula 1 is built on a high-strength 5 mm aluminium chassis. All chassis holes (screws) are countersunk from below. The front and rear axle with versatile adjustment options such as camber, caster etc. consists of double triangular wishbones. The double triangular wishbones of the rear axle are supported by additional track rods, with which the adjustment work can be carried out as quickly as possible. Thanks to the mounted wishbone threaded rods with right-hand and left-hand threads, all adjustment work can be carried out without dismantling any parts. The model is equipped with 4 aluminium oil pressure shock absorbers. The push-rod suspension ensures play-free transmission from the individual wheel suspension to the shock absorber. The Formula 1 chassis is supplied with a powerful 26 cm³ combustion engine. Power is transmitted via a four-jaw Teflon clutch to a toothed belt drive. This toothed belt drive is also designed for increased drive power. The BBS rims and tyres were modelled on the large prototypes. All rotating parts are mounted on ball bearings. The construction of the Formula 1 chassis is not identical to the other 1:5 FG models such as the Mercedes C-Class, racing truck etc. and therefore cannot be converted to these models using conversion kits.In unserer Shopauswahl ist das Modell auch inklusive kompletter RTR-Ausstattung erhältlich!RTR AusstattungRTR = Ready to Run. Die RTR-Version wird fahrfertig und mit montierter 2,4 GHz Fernsteuerung ausgeliefert.Sender 2,4 GHzEmpfängerHochleistungsservo für Gas und BremseGroßmodellservo für LenkungSenderakku, EmpfängerakkuMaße:Länge: 960 mmBreite: 440 mmHöhe: 230 mmRadstand: 620 mmFormel 1 Modelle in Action!Antrieb:2WDMaßstab:1:5Motorisierung:BenzinRTR:RTR auswählbar

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

Highlights News 2025 Tuning aluminium lower wishbones, one-piece (front and rear) FG hydraulic brakes front and rearTuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment  Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibre Highlights Formel 1 Competition- This model is fitted with numerous aluminium parts: - front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Technical description of the FG Formula 1 Competition :The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with FG hydraulic brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition CNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ Zenoah engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, FG hydraulic brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engineAirboxPipe Clear bodyshell and polycarbonate spoiler FG hydraulik brakes front and rearDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

Genuine FG spare/option part. Contents:1 piece

Genuine FG spare/option part.Contents:2 pieces

The Basic Kit is particularly intended for persons switching and differs from the Evo 2020 by not including the following parts: Engine Tuned pipe Body shell Rear wing Wheels Innovations of the, according to the manufacturer FG, the race model EVO 2020 to be expected in September 2020 Competition-OnRoad RC car with the latest technical developments. Latest version Improved - in numerous details! Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content10 mm T7075 aluminum chassis plateAir filter / AirboxFront and rear hydraulic brakesDifferentialLarge volume shock absorbers, black anodized