DYNB5045H5 Dynamite Reaction 2.0 14.8V 5000mAh 4S 50C LiPo, Hardcase: EC5
Product number:
dyne_dynb5045h5
EAN:
605482417218
Product information "DYNB5045H5 Dynamite Reaction 2.0 14.8V 5000mAh 4S 50C LiPo, Hardcase: EC5"
Genuine Dynamite spare/option part.
Dynamite's new Reaction 2.0 batteries come with all the power and performance you've come to expect from the original Reaction line, but now include a QR code directly on the battery label. You can scan the QR with the Dynamite Dashboard Smart Phone App for even quicker and easier setup. In addition, all Reaction 2.0 hardcase batteries now come in a sleek black color to better match whatever setup you use them in.
Contents:
Dynamite's new Reaction 2.0 batteries come with all the power and performance you've come to expect from the original Reaction line, but now include a QR code directly on the battery label. You can scan the QR with the Dynamite Dashboard Smart Phone App for even quicker and easier setup. In addition, all Reaction 2.0 hardcase batteries now come in a sleek black color to better match whatever setup you use them in.
Features:
- Balance Lead Length: 2.16 in (55mm)
- Battery Balance Connector: JST-XH
- Battery Type: LiPo
- Battery Voltage: 14.8V
- Capacity: 5000mAh
- Cell Configuration: 4S1P
- Charge Protection Circuitry: No
- Connector Type: EC5
- Discharge Lead Length: 3.54 in (90.0mm)
- Hard Case: Yes
- Height: 1.89 in (48mm)
- Length: 5.47 in (139mm)
- Maximum Charge Current: 15A
- Maximum Charge Rate: 3C
- Maximum Continuous Discharge Rate: 50C
- Normal/Standard Charge Current: 5A
- Normal/Standard Charge Rate: 1C
- Watt Hours: 74.0Wh
- Width: 1.89 in (48mm)
- Wire Gauge: 12 AWG
Contents:
- 1 piece
Login
Customers also viewed
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 5000Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 60C (220A)Contents:1 piece
losi_dynb0501 Safety Bag:
2 x TT1499 Top Tuning Safety Bag for LiPo batteries+ 19.9EUR
DYNB501 Dynamite Reaktion Lipo Receiver Pack 4000mAh 2S 7,4V 15C with EC3 and Universal electric wire.Specifications:Cells: 2SCapacity: 4000 mAhVoltage: 7.4 VLength: 105 mmWidth: 34 mmHeight: 27 mmWeight: approx. 190 gramsBalance connection: XPH (XH) Warning:- Use only under direct supervision of adults- Charge only in a suitable charging bag / protective bag- Do not store battery discharged (at least 50% charge is recommended)
Variants from €59.99*
Ready for an extra portion driving fun? Then try the TR4 made by FG! Agressive appearance combined with the Leopard 4 chassis results in an optimal handling and stunning top speed with lots of driving fun wich will thrill you. Equipped with a 26 cm³ two-stroke gasoline engine with installed pull-start system. The TR4 is an uncomplicated complete package with well-tired racing technology.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical information:Strong 26 cm³ gasoline engineMaintenance friendly chassisTwo differential gearsHardened driving partsCompletely ball-bearedLarge-volume aluminium dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure driving funDimensions: Length: 760 mm Width: 520 mm Height: 320 mm Wheelbase: 534 mm
Ready for an extra portion driving fun? Then try the FG Monster Buggy Pro! This aggressive looking model based on the Fun Cross chassis is extremely fast, easy to handle and very pleasant to drive. A complete package of well-tried racing technology! The model will be delivered with a clear body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURPowerful 26 cm³ petrol engineMaintenance friendly chassis2 Differential gearsHardened driving partsCompletely ball-bearingedLarge-volume alum. dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure funThe model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. The RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.Measures:Length: 715 mmWidth: 495 mmHeight: 360 mmWheelbase: 535 mmWeight: 10,4 kg
Genuine HT spare/option part.Length approx. 140 mm, 14 AWGContent:1 piece
Genuine Losi spare/option part. Contents:1 set
Special plastic cleanerPE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic,which is thus protected from the inside out, remains permanently supple and retains its natural gloss.Most RC cars have various axle parts, such as control arms and bearing blocks made of plastic. Due to weather influences and especially UV rays,or contact with tire conditioners can cause the plastic to become brittle and weather over time.Especially with unpainted plastic, this process progresses relatively quickly. PE100 slows down this process and provides intensive protection,which significantly extends the life of the plastic. Also, the likelihood of seals and protective rubbers (e.g. bellows for drive parts) becomingbecome brittle are much lower.In addition to this protective effect, PE100 gives the plastic parts a fresher appearance. PE100 is also excellent for protecting electronic parts frommoisture in electronic parts. Das Produkt bildet eine wasserverdrängende Schicht und verbessert somit den Korrosionsschutz.In the spray can, PE100 is particularly user-friendly and practical to use. Thanks to the special nozzle with tube supplied, even difficult-to-reach areas can be treated effortlessly. Highlights H3> span> clear, almost invisible fluid div> span> Easy application div> span> displaces moisture div> span> Long-term effect div> span> protects plastics against discoloring div> span> holds rubber parts supple and prevents them freeze div> span> protects ignition systems from moisture-related disorders div> div>> CONTENTS base: silicone oils, mineral oils and additives Density: 710 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: ± 15 mPa.s li> Flash point: 0 ° C compressive strength: minimal li> temperature resistance: -20 ° C to> 150 ° C li> water resistance: good li> acid resistance: resistant to dilute acids li> corrosion protection: good. Corrosion protection results from the formation of a water-displaced layer. Inputs: good li> lubricant content: 17% li> Processing conditions: + 5 ° C to + 40 ° C Underground: Most plastics, rubber and metal USAGEPreparation of the substrate: Provide a clean, dry, grease-free and non-corroded substrate.Shake can well before use. When used as a lubricant, spray the product directly onto the part to be lubricated. When used as a plastic and rubber protector, spray the product directly (spray distance 15-20 cm) or apply with a cloth or sponge. To achieve a beautiful shine, briefly polish the plastic with a clean, dry Multi Wipe. Material cleaning: With Innotec Multisol or Innotec Power Clean Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F
Content: 500 Milliliter (€31.80* / 1000 Milliliter)