ST-AN23G SPEED TEC 0,25/0.50 mm Crankcase gasket AN - expansion sealing gasket
Product information "ST-AN23G SPEED TEC 0,25/0.50 mm Crankcase gasket AN - expansion sealing gasket"
Genuine Speed-Tec spare/option part.
AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels!
The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly!
The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine!
Technical data of the material in contact with fuel:
- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;
- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5
The SPEED TEC AN - expansion sealing gaskets are available in the following versions:
Contents:
AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels!
The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly!
The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine!
Technical data of the material in contact with fuel:
- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;
- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5
The SPEED TEC AN - expansion sealing gaskets are available in the following versions:
- # ST-AN26V carburetor gasket 0,25/0,50 mm
- # ST-AN25I insulator gasket 0,25/0,50 mm
- # ST-AN24L air filter gasket 0,25/0,50 mm
- # ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm
- # ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm
- # ST-AN23G crank case gasket 0,25/0,50 mm
Contents:
- 1 piece
Login
Customers also bought
Race ported top end set for Zenoah G230 engine.The SPEED TEC EXPERT genuine Zenoah G230 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ().
Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces