Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

SCZ-E03 Fan cover SCZ E290

Product information "SCZ-E03 Fan cover SCZ E290"

Genuine SCZ spare/option part.

Replacement part for SCZ E290 engine, order-no. y1386.


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

SCZ-E10 Ignition coil SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 piece

€38.50*

Average rating of 0 out of 5 stars

SCZ-E04 Fan and ignition housing SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 piece

€78.20*

Average rating of 0 out of 5 stars

y1386/03 Aluminum engine mount for SCZ 290E in Losi DBXL
Genuine SCZ spare/option part. CNC-machined 6061-T6 aluminum engine mount for the SCZ 290E, required for installation in the Losi DBXL.Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

AREA BJ009 Aluminum engine mount brace Baja 5
Genuine Area spare/option part. Aluminum l/h rear engine mount brace for all cars of the HPI Baja 5 series. Utilizes both engine mounting holes and stiffens the corresponding section of the chassis structure.Please note: does not fit in combination with Zenoah G320 engine.Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

SCZ-E16 Coil bracket SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 piece

€15.50*

Average rating of 0 out of 5 stars

SCZ-E12 Kill switch SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386.Contents:1 piece

€5.70*

Average rating of 0 out of 5 stars

SCZ-E09 Piston set SCZ E290
Genuine spare/option part. Piston with ring, pin, circlips and needle bearing.Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 set

€64.90*

Average rating of 0 out of 5 stars

SCZ-E15 Flywheel with nut and key SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 set

€47.90*

Customers also viewed

Average rating of 0 out of 5 stars

SCZ-E04 Fan and ignition housing SCZ E290
Genuine SCZ spare/option part. Replacement part for SCZ E290 engine, order-no. y1386. Contents:1 piece

€78.20*

Average rating of 0 out of 5 stars

y1466 Gasket kit for all engines
y1466 Version: y1376 Full set of gaskets for Zenoah G240, G270, G290, and 4-Bolt Losi, HPI, CY engines
y0467 Complete gask set for Zenoah 230 + 260, CY, Reely, HPI and Losi 2 bolt engines, setHigh quality gasket set for all G230 and G260 Zenoah engines, all Chung Yang, Reely an HPI Fuely engines from 23 to 30,5 cc. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Set includes gaskets for:cylinder bottomcarburetorisolatorexhaustcrankcasey1376 Full set of gaskets for Zenoah G240, G270, G290, and 4-Bolt Losi, CY enginesFull set of gaskets for Zenoah G40, G270, G290, and 4-Bolt CY engines.Set includes:0.4 mm cylinder gasket (Zenoah stock thickness!)1 mm exhaust gasket0.5 mm crankcase gasket0.5 mm isolator gasket0.5 mm carburetor gasket0.5 mm air filter gaskety1016/112 Complete Zenoah G320 sealing setSet includes:y1016/005 Cylinder gasket G320RCy1016/007 Insulator gasket G320RCy1016/013 Crankcase gasket G320RC7332 Silencer gasket7337 Carburetor gasketUnit prices: 20,10 EURy1386/02 SCZ Sealing set for E290 race engineGenuine SCZ spare/option part.Set includes all necessary seals.

€12.90*

Average rating of 0 out of 5 stars

050025 Carson Coupling flange for Dirt Attack GP 2.0
Genuine Carson spare/option part.Required to install engines in the Carson Dirt Attack GP 2.0.Content:1 piece

€24.90*

Average rating of 0 out of 5 stars

y1610 SPEED TEC Expert 7-port Zenoah G320 modified engine
The SPEED TEC 7-port genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. More power and torque through the three additional transfer ports.SPEED TEC V 7-port version modifications: Cylinder:Cylinder bottom modified for higher compressionenlarged and flow-optimized transfer portsmachining of three additional transfer ports raises number of ports from 4 to 7intake and exhaust ports optimized and matchedport timing modifiedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Weight reduced and checked for run-out.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.With the new "K & N" version of the Losi DBXL there is another detail, which need to be considered.From the very beginning the hole pattern for the engine installation in the DBXL chassis plate was no precise match to the hole pattern of the engine, even when delivered in stock form with standard engine. Now with the "K&N" version the engine mount has been changed to eliminate this discrepancy. However, all aluminum engine mounts available on the market share their dimensions with the previous plastic engine mount. For the installation of a G320 Zenoah in a "K&N" -DBXL two possible combinations exist in order to obtain the correct hole pattern:When using the standard (new) plastic engine mount a shortened clutch housing is required as in a 5ive-TWhen using an aluminum engine mount a stock length clutch housing is requiredSeparately, it is recommended to enlarge the cutout in the body panel in front of the K & N air filter for about 2 - 3 mm to ensure that the panel cannot chafe on the air filter.For all HPI Baja 5 cars the G320RCer clutch housing has to be shortened at the mounting base, for Losi 5ive- T and Desert Buggy XL cars the clutch housings overall length must be shortened to CY size.When installing the air filter you must pay attention to the length of the screws.For use on Losi and HPI we recommend M5x45 screws (like H94763); you can also cut existing screws to length, of course.When ordering with a modified clutch housing we will include these screws!In our shop you can select from Zenoah G320RC engines already modified to fit your HPI or Losi car.The installation of a Zenoah G320RC in a Smartech C5 onroad car is possible without modifications. However, due to the engines performance aluminum engine mounts (set # y0189) are mandatory!The installation of the Zenoah G320RC in other cars (like FG or Smartech buggies / monsters a.s.o.) is not even remotely straightforward, since the layshaft pinion (the small pinion in front of the big differential spur gear) is in the way for the larger Zenoah G320RC crankcase.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€809.00*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency