SB162 GPM tie rods with turnbuckle for Super Baja Rey.
Product information "SB162 GPM tie rods with turnbuckle for Super Baja Rey."
Original GPM Ersatz-/Tuningteil.
Adjustable tie rods for Super Baja Rey, lightweight aluminum center section.
Please note: Does not fit Super Baja Rey 2.0!
Contents:
Adjustable tie rods for Super Baja Rey, lightweight aluminum center section.
Please note: Does not fit Super Baja Rey 2.0!
Contents:
- 1 piece
Login
Similar products
Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm
Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray
Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey, Super Baja Rey 2.0 and Super Rock Rey. Suitable for 8 mm axles.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: These adapters only fit in combination with the optional aluminum spindles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which requires different dimensions for the wheel drives.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting.
Please note: the wide rear wheels from MadMax or HPI do not fit!
This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm
Hobbythek car bag for 1/6 cars.
Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models.
Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.
No dirt in the car boot!
Dimensions:
Length: 70 cmWidth: 50 cmHeight: 40 cm
Genuine GPM spare/option part. GPM's aluminum rear shock tower for the Losi Super Baja Rey / Rock Rey is much more rigid than the standard plastic part. It offers an increased number mounting positions for the shock and therefore allows for a more precise setup. Contents:1 set
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece
Genuine GPM spare/option part. Rear wheel bearing carriers for Losi Super Baja Rey / Rock Rey, 0° toe-in (stock) made by GPM, machined from high grade 6061-T6 aluminum provide better fit for the bearings and therefore increase their life span.We recommend installing the ball bearings with a little dab of screw cement.Contents:2 pieces
Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi Super Baja Rey.The set includes a total of 321 screws, in different quantities which are all used on the Losi Super Baja Rey / Rock Rey.6 sizes of cap head screws11 sizes of CSH screws13 sizes of button head screws6 sizes of set screws3 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:4 piecesM2x101 piecesM2,5x813 piecesM3x102 piecesM3x122 piecesM3x165 piecesM3x306 piecesM3x45 CSH screws in 10.9:5 piecesM2,5x86 piecesM3x66 piecesM3x1234 piecesM3x161 piecesM4x1010 piecesM4x122 piecesM4x149 piecesM4x166 piecesM4x1814 piecesM4x202 piecesM4x25Button head screws in 10.98 piecesM3x89 piecesM3x195 piecesM3x126 piecesM3x1616 piecesM3x204 piecesM3x304 piecesM3x3512 piecesM4x128 piecesM4x1618 piecesM4x2010 piecesM4x2512 piecesM4x301 piecesM4x35Grub screws:2 piecesM3x63 piecesM4x46 piecesM4x56 piecesM4x61 piecesM5x48 piecesM5x30Washers:Unterlagscheiben:5 piecesM3,25 piecesM4,34 pieces H5 Seeger HalfmoonSelf-locking nuts:4 piecesM335 piecesM4Nuts:2 piecesM45 piecesM5
Genuine GPM spare/option part. Front lower hinge pin plates from GPM for Losi Super Baja Rey / Rock Rey. Precision laser-cut from 3 mm stainless steel. Contents:2 pieces
Genuine GPM spare/option part. Axle extenders for Losi Super Baja Rey / Rock Rey, 2 mm per side (4 mm in total). 20 mm hexagon, matching the original rims. Since the driving pins are no longer completely secured by the rim when using axle extenders, special threaded bolts are used for this application.The set also includes closed wheel nuts to protect the outer edge of the thread.2 axle extenders2 threaded steel pins2 closed wheel nuts
Genuine HT spare/option part.Allows the use of a single 4S or 6S battery in a Losi Super Baja Rey / Rock Rey.Content:1 piece
Genuine rc-car-online spare/option part. Complete set of sealed (2RS) bearings for Losi Super Baja Rey / Rock Rey.4 pieces 4 x 8 x 3 mm Losi # LOS25700715 pieces 8 x 16 x 5 mm Losi # LOSA6942/016 pieces 10 x 19 x 5 mm Losi # LOS257006Price bought separately 78.56 EURSpecial-offer price for the complete set 39.90 EURContents:25 pieces of of sealed (2RS) bearings
Customers also viewed
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!
Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces