P-SBS/01TE Futaba Temperature Sensor up to 125 degrees

€84.90*

Available

Product number: fut_p_sbs_01te

EAN: 4513886307782

Product information "P-SBS/01TE Futaba Temperature Sensor up to 125 degrees"

Genuine Futaba spare/option part.

Temperature sensor for Futaba S.BUS2. telemetry system.

Suitable for use with the Futaba 4PX and 7PX transmitter.

Technical data:

Range: 0°C~ 125°C (32 °F~ 257 °F)
Length: 350 mm (13.8 in.)
Weight: 3.8 g (0.134 oz.)
Voltage: DC 3.7V ~ 7.4V

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

TT1499 Top Tuning Safety Bag for LiPo batteries

Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece

€12.90*

y0735 Safety clip for Universal / JR / Futaba connectors

Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece

€1.50*

y0720 rc-car-online Transmitter bag

Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€24.90*

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution

Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

2012/503 Steering servo linkage set dedicated to Mecatech FW01

Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

y1352 Powerbase 13.8 V/20 A power supply

Ideal power supply for tire warmers! The Powerbase power supply delivers with 13.8 volts the ideal and constant current for tire warmers. A 45 mm cooling fan on the back keeps the Powerbase power supply running cool. Including a slow 4 A / 250v fuse for overload protection. Specifications: Input voltage: 190 - 240 Volts AC Output voltage: 13.8 volts regulated DCOutput connector: 4 mm plug / alligator clips For additional information pleas go to the Technical data tab. Tire warmers can be found under part numbers y1351/01 and y1351/02 or save with the complete set part number y1351/03.Contents:1 piece

€69.90*

This product is currently not available.

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution

Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

y1588 Aluminum receiver antenna mount

Genuine rc-car-online spare/option part. Versatile aluminum bracket for easy installation in panels or RC boxes with up to 4 mm wall thickness. Only a 6 mm hole is required and the bracket is fastened with the included nut. Alternatively, for installation in thicker material an M6 thread can be tapped as well. An O-ring provides a seal when installed in RC boxes.The bracket has a stepped hole into which the common antenna tubes of about 3.2/3.3 mm diameter can be inserted, but not pushed through. The hole for the antenna cable has a diameter of approx. 2.5 mm.The height of the bracket above the mounting surface is 16 mm.The scope of delivery includes an end cap and two antenna tubes with a length of approx. 170 mm.Contents:1 set

€9.90*

TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch

tt_tt1000 Connector: TT1000/01 Universal in - Universal out

Genuine Top Tuning spare/option part. Top Tuning The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1005SGT servo and 4s receiver battery. The switch can also be used for other applications at your discretion with batteries up to 6S.Note: Top Tuning the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VLoad: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 29 mm Width: 13 mmHeight: 12 mmContents:1 piece

€39.90*

2012/500 Linkage set dedicated to Mecatech FW01, complete

Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Spektrum SPMA9571 Telemetry Temperature Sensor

Genuine Spektrum spare/option part. Contents:1 piece

€19.99*