The ideal cleaner for pretreatment of Lexan body shells when are to be applied! Decals or detailing kits will stick significantly better to a body shell cleaned with LOCTITE 7063. Also great for removal of "battle scars" from the body shell. But note: The cleaner should not come in contact with the printed surface of the decals!Use to prepare surfaces to be bonded. The product flashes off very quickly and it allows cleaning directly prior to adhesive/sealant application. It is non-corrosive and non toxic.Application:Spray a sufficient amount of product on the surface to be cleaned and wipe while still wet to ensure heavy contamination and excess solvent is removed.Content:400 ml
Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill. Not included are the advertising labels for the original design. Please order separately.Dimensions:480 x 80 mm295 x 190 mm270 x 105 mmContents:1 set
Genuine FG spare/option part. Decal set fpr the MIni Cooper including frond and rear spotlights, air inlets a.s.oDimensions:430 x 230 mmContents:1 piece
Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Available in the colors black or white.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
Genuine HT spare/option part. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmIn the shopping cart selection of this large Jägermeister team decal sheet,this is also available in a with an extra charge under item number y0683/01high-quality opaque screen print version, available on a special film.This decor set is especially for decorating on dark Body colors suitable.Contents:1 piece
Genuine HT spare/option part. rc-car-online lettering with correspondig logo. All decals are cutted with a plotter. Dimensions:Sheet with car logos: 450 x 160 mmSheet with rc-car-online letterings: 450 x 140 mmContents:1 piece
y3017 Elasto film:
y3017/E On Elasto film, + 100%+ 19.9EUR
Genuine HT spare/option part. Universal sponsor decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.All logos are 40 mm wide, their heights differ depending on the logo; four logos each per sheet.With logos from: Kenwood, Sparco, Shell V-Power, Sonax, Recaro, O-Z Racing, Hankook, ABT, Michelin, H&R, Eibach, Castrol, Akrapovic, Bosch, Bilstein.Size (Height x Width):Complete sheet: 310 mm x 450 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
Genuine HT spare/option part. Decal sheet with logos from several rc-car and supplies manufacturers. All decals are cutted with a plotter. List of manufacturers:rc-car-online.deSmartechLightscaleMecatechHPI-RacingRC-PaintRoadiesFGSpektrumClark´sLosiHorizon HobbySpeed-TecGRPBigscalerGPMPMTZenoahMultiplexLRPChung YangMotulHitecDimensions:220 mm x 330 mmContents:1 piece
Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill. Not included are the advertising labels for the original design. Please order separately.Dimensions:480 x 80 mm295 x 190 mm270 x 105 mmContents:1 set
Genuine FG spare/option part. Contains the advertising labels for original design.The decal set contains no headlights, rear lights etc. Please order separately. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmContents:1 piece
y3016 Elasto film:
y3016/E On Elasto film, + 30%+ 3.21EUR
Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
Genuine HT spare/option part. Pulse beat decals with pinstripe trim for body shell decoration. The pulse beat decals have a total length of about 395 mm, a height (measured at the highest peak) of about 90 mm and a line width of 5 mm. The pinstripe trims are about 395 mm long by 5 mm wide.Colors available:y3008/01 - Greeny3008/02 - Orangey3008/03 - Bluey3008/04 - Redy3008/05 - Pinky3008/06 - BlackContents:1 piece
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Mini Cooper is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted Mini Cooper bodyshell , 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips:
Genuine HT spare/option part. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmIn the shopping cart selection of this large Jägermeister team decal sheet,this is also available in a with an extra charge under item number y0683/01high-quality opaque screen print version, available on a special film.This decor set is especially for decorating on dark Body colors suitable.Contents:1 piece
Genuine FG spare/option part. Mini Challenge Team decals with red and white stripes, writings a.s.o, suitable for the MIni Cooper bodyshell.Dimensions:500 x 230 mm455 x 115 mmContents:1 set
Contains the advertising labels for original design.Sheet dimensions:490 x 420 mm325 x 130 mmThe decal set contains no headlights, rear lights etc.Please order separately.
€39.80*
This website uses cookies to ensure the best experience possible. More information...