LOS351007 Chassis Brace, Rear, Black, Aluminum DBXL-E 1/5 4WD

€49.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_los351007

EAN: 605482191682

Product information "LOS351007 Chassis Brace, Rear, Black, Aluminum DBXL-E 1/5 4WD"

Genuine Losi spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

LOS253008 Losi Shock gaitors Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:4 pieces

€19.99*

LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€9.99*

LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Content:1 piece

€16.90*

LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0

Genuine Losi spare/option part. Contents:10 pieces

€9.99*

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD

Genuine Losi spare/option part. Content:4 pieces

€59.99*

LOS254005 Losi Uprights Carriers/Spindles/Hubs Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€39.99*

LOS253006 Losi Spring Cups/Clips/Shock Ends Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€29.99*

LOS252058/01 Losi brushless motor mounting plate, black, DBXL-E / DBXL-E 2.0

Genuine Losi spare/option part. Aluminum brushless motor mounting plate, black, incl mounting screws for the motor.Size:Outer dimensions max. 40 x 46 x 10 mmContents:1 set

€29.90*

LOS252018 Front Universal Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 piece

€59.99*

LOS254013 Losi Front & Rear Sway Bar Kit Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€19.99*