DM4000/02 servo arms, rubber grommets and guide sleeves for K-Power
Product number:
kpower_dm4000_02
EAN:
4058575102816
Product information "DM4000/02 servo arms, rubber grommets and guide sleeves for K-Power"
Genuine K-Power spare/option part.
Spare part for K-Power DM4000 Servo.
Content:
- 1 x 4-sided servo arm 60 mm
- 1 x single-sided servo arm 55 mm
- 1 x servo disk 40 mm
- 4 x Mounting screw
- 4 x Rubber grommet
- 4 x Guide sleeve
Login
Customers also bought
Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece
y0711_alle Version:
y0711/01 Single-sided split alloy servoarm
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:K-Power DM4000Multiplex RhinoHitec 805Savöx SV-0236MGSpektrum S9010 and S9020LOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)Losi SPMS904 WPand many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces
Similar products
Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:1 x case top 1 x case middle section1 x case bottom6 x long screws for case top6 x short screws for case bottom2 x large o-ring 1 x small o-ring
Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:4 x metal gears1 x 15T spline output shaft2 x ball bearing (1 bearing installed in output shaft)3 x steel pin
Genuine K-Power spare/option part.Spare part for K-Power DM4000 Servo.Content:1 set
Customers also viewed
After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.Dimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mm Trucks in action!
%
When the original 5IVE-T was introduced the world of 1/5-scale off-road racing changed, and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 Electric: 1/5 4WD Short Course Truck has all of the unrivaled performance of its predecessor. Comes with
ZTW Beast Pro 200A ESC and 56112/700 Top Tuning Monster Brushless Motor 700 kV and TT1024 Top Tuning Electric conversion kit included. Inclusive RTR-Version: y1567 ZTW Beast Pro 200A ESC:56112/700 Top Tuning Monster Brushless Motor 700 kV:The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme.Key Features:
ZTW Beast Pro 200A ESC
56112/700 Top Tuning Monster Brushless Motor 700 kVInnovative Bind-N-DriveImproved bar style steering rack with adjustable AckermannImproved center differential orientationImproved drive line angleHeavy-duty brakesTough steering and gas/throttle servo brace 50+ MPH The brushless ESC and motor provide wicked power with an 8s LiPo battery (not included) that will blaze speeds of 50+ MPH. What's in the Box?Losi 5IVE-T® 2.0 4WD SCTS900S 1/5 Scale Metal Gear Steering ServoReflex Wheel Pro 3, 2,4 GHz with mini receiverTop Tuning conversion kit TT1024
56112/700 Top Tuning Monster Brushless Motor 700 kV.
ZTW Beast Pro 200A ESC
Wheel WrenchRod End/Shock End toolMulti Wrench2.0mm, 2.5mm, 3.0mm, 4.0mm Allen WrenchesProduct Manual Dimensions Height: 181 mm Length: 965 mm Width: 520 mm Weight: 17 kg For operation only the batteries and a charger are required. Contents:1 piece If you run the maximum operating voltage approved for an esc, there is a risk, especially in large scale cars, that under certain circumstances the reverse currents generated by the motor when braking will destroy the esc.Please note that reversing is then no longer possible! The complete set in our online shop with item number y1565
including Losi servo HS901T.