Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

B55061 Spark plug wrench

Product information "B55061 Spark plug wrench"

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

FG Challenge Line 2WD-530 Porsche 962C with 26 cm³ FG engine
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 945 mmWidth: 390 mmHeight: 215 mmWheelbase: 530 mm

From €899.90*

Average rating of 0 out of 5 stars

y0813 Motul 800 Racing Oil
Fully synthetic oil, available in three blends. 1-liter bottle.The optimal 2-stroke oil for 23-30 cm³ engines/cars Motul Racing Oil is available in three different blends: On-Road for high revving onroad cars Off-Road for cars with high torque enginesMixing ratio for 1/5 & 1/6 applications: We recommend a mix with about 4% oil, which means 200 cc of oil to 5 litres of gas (1:25 ratio). With one litre of Motul oil you can mix about 25 litres of optimal fuel for your 1/5 or 1/6 car. That's enough for well over 20 hours of driving fun! Oil / Gas Oil percent Oil per 1 liter of gasoline Oil per 2 liter of gasoline Oil per 3 liter of gasoline Oil per 4 liter of gasoline Oil per 5 liter of gasoline 1:20 5% 50 ml 100 ml 150 ml 200 ml 250 ml 1:25 4% 40 ml 80 ml 120 ml 160 ml 200 ml 1:30 3,33% 33 ml 67 ml 100 ml 134 ml 167 ml 1:33 3% 30 ml 60 ml 90 ml 120 ml 150 ml 1:35 2,86% 29 ml 58 ml 86 ml 115 ml 143 ml 1:40 2,5% 25 ml 50 ml 75 ml 100 ml 125 ml 1:50 2% 20 ml 40 ml 60 ml 80 ml 100 ml

From €24.00*

Average rating of 0 out of 5 stars

- GWH05-XM1plus GRP Slick W05 XM1 plus Tyres Soft
The new GRP tire XM1plus was produced to complement the GRP 2023 tire range because the vehicle set-up of the 1:5 RC cars showed that the grip between the compound difference of the XM1 and the XM2 proved to be a little too big.The addition of the GRP program with this new mixture of the XM1 plus, which consequently lies between the XM1 and XM2 in terms of grip, has shown that this often enables a more precise vehicle set-up and is particularly recommended for longer races, such as final runs.This pair of XM1plus tires has the following performance characteristics: HIGH GRIP for clean tracks. HIGH GRIP for medium to coarse asphalt grain. HIGH GRIP for medium to high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

Average rating of 0 out of 5 stars

- GWH05-XM2 GRP Slick W05 XM2 Tyres Medium
This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

Average rating of 0 out of 5 stars

y0950 Spark plug, Champion RZ7C, 3 pcs.
Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces

€19.90*

Average rating of 0 out of 5 stars

y0305 Colored flexible fuel line, top quality, 1 meter
y0305 Color: y0305/04 - Green
High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

Similar products

Average rating of 0 out of 5 stars

B55002 C.hub spacer bushing
Dimensionally identical with Losi 5ive LOSB2074.Contents:4 piece

€12.90*

Average rating of 0 out of 5 stars

B57020 Clutch bell holder
Dimensionally identical with Losi 5ive-T 1.0 part LOSB5036.Contents:1 piece

€39.90*

Average rating of 0 out of 5 stars

B61013/61014 Side guards
Contents:2 pieces

€44.90*

Average rating of 0 out of 5 stars

B61018 Rear body shell support
Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

B56071 Bearing 10x15x4mm
Dimensionally identical with Losi LOSB5970Contents:2 piece

€6.90*

Average rating of 0 out of 5 stars

B69011 Fuel tank assy
700 cc capacityDimensions: Length 175 mm x width 120 mm x height 100 mmContents:1 piece

€49.90*

Average rating of 0 out of 5 stars

B69016 Front ball drive cup set
Contents:1 set

€14.90*

Average rating of 0 out of 5 stars

B61007/51027 Fuel tank bracket
Contents:2 piece

€14.90*

Average rating of 0 out of 5 stars

B56045 Screw for shock install M6x45mm
Dimensionally identical with Losi 5ive part LOSB2859.Contents:4 piece

€24.90*

Average rating of 0 out of 5 stars

B69006 Engine protect cover
Contents:1 set

€32.90*

Average rating of 0 out of 5 stars

B61025 Throttle servo mount
For servos with a 75 x 18 mm mounting bolt hole pattern.Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

B69023 Center drive shaft
Contents:1 piece

€29.90*

Customers also viewed

Average rating of 0 out of 5 stars

FG Challenge Line 2WD-530 Porsche 962C with 26 cm³ FG engine
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 945 mmWidth: 390 mmHeight: 215 mmWheelbase: 530 mm

From €899.90*

Average rating of 0 out of 5 stars

y0827 Spout for gas cans, 1 pce.
Spout, fits the standard gas cans, for a spill-free gas up. For gas cans with the following thread size: diameter 37 mm x pitch 5 mm.Compatible with Marder tanks as well!

€22.90*

Average rating of 0 out of 5 stars

y0701 Double sided split alloy servoarm, 1 pce.
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€19.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency