AKX177/187-12 GPM knurled nut for GPM ARMA shock absorber
Product number:
akx177_187_12
EAN:
4058575144489
Product information "AKX177/187-12 GPM knurled nut for GPM ARMA shock absorber"
Nut for Arrma shock absorbers and AKX187 front and rear.
1 pieces
Login
Similar products
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set contents:
Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version). We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and springs with 2.75 mm wire diameter.These technically demanding, excellently manufactured GPM Piggyback shocks come ready for use, assembled and filled with 1000 viscosity silicone oil. For a possible fine tuning (less damping with lower viscosity, more with higher viscosity) we recommend our silicone oils y0038 (50 ml) or y0039 (100 ml). Approximately 23 cm³ of oil is required to fill one shock absorber.Suitable for Losi 5ive-T, 5ive-B and Mini.The shocks are compatible with all springs offered for these vehicles such as Front:Length extended/compressed (center-to-center of mounting points): approx. 156 mm/110 mm.Contents:2 pieces / 1 pairs
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions (front):distance between mounting holes (extended): 187 mm travel: 62 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
Fully assembled and factory filled with 1.000 viscosity silicone oil. Including springs which can be adjusted via a threaded collar. The excellent quality GPM shocks fit all cars of the HPI Baja 5 series, Carson Wild GP Attack and feature an extremely massive 7 mm rod. The GPM shocks cases and rod ends are completely made of aluminum and equipped with replaceable bushings at the upper and lower mounting points.The external volume control is more efficient than built-in versions with membrane or foam element. Compared with the technically similar solution of a floating balance piston inside of the shock absorber body there is the advantage that no length of the shock absorber is needed for the volume compensation. Furthermore the additional housing surface of the equalizing chamber helps in cooling the oil. Dimensions:distance between mounting holes (extended): 207 mm travel: 69 mm li> Outer diameter: 28 mm Mounting specifications: top and bottom 12 mm wide ball mount with 4 mm bore The GPM shocks are filled with 1.000 viscosity silicone oil. For a firmer setting 1.500 or higher viscosity silicone oil is recommended. If a softer setup is required, 900 or lower viscosity oil should be used.
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S front suspension application only!Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.Contents:1 set
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod.Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Contents:2 pieces
Item N° y0574/02GPM-Spezial Cross shocks singel, 1 pce.GPM-Spezial Cross shocks, premium full metal version, assembled and filled.Special features:- 16 mm shock bore for increased capacity- volume compensation- shock body and caps machined from billet aluminum- hard anodized shock body- machined precision delrin pistons (not injection molded!)- aluminum shaft end and spring retainer- shock caps with replaceable bushings-factory filled with silicone oilWe recommend our progressive offroad tuning springs "". FG cars can use their stock springs as well.Dimensions: - Overall length, extended: long 155 mm- Mounting distance, extended: long 144,5 mm- Travel: long 43,5 mm- Inner diameter of spring: 21 mm - Shock body diameter: 20 mm - Eye bore: 4.5 mm - Eye thickness: top 6 mm, bottom 5 mm - Shaft diameter: 4 mm - Shaft thread: M4 Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 500 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 400 or even 300 viscosity oil; 600 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.
Product information "y1137/02 GPM-Big Bore Premium shock absorbers for FG Monster/Stadium Truck 2WD, set" Set consists of 4 shock absorbers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation
Housing and screw connections made entirely of aluminium Hard anodised housing
Precision piston made of Delrin, machined (no moulded part!)
Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes
Pre-filled with 1000 silicone oil. For the following models:
FG 2WD:
Monster Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set contents: Four long shock absorbers We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume
Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.