9540/22 FG Gasket

€7.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_9540_22

EAN: 3410569708717

Product information "9540/22 FG Gasket"

Genuine FG spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

9540/32 Hydraulic Oil 50 ml

Genuine FG spare/option part. Contents:1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

9540/21 O-ring

Genuine FG spare/option part. Content:1 piece

€3.30*

Details

P-R-M 1000-41/01 Epoxy brake disk for FG brake

PRM premium quality epoxy brake discs.Suitable for the FG brake 9540 and 9541, replaces the original brake disc (9445/05). Dimensions: Outer diameter: 69 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Content:2 Pieces

€24.90*

9440/25 FG Valve

Genuine FG spare/option part. Contents:2 piece

€15.30*

9540/16 Main brake cylinder

Genuine FG spare/option part. Content:1 piece

€81.30*

9540/11 Plate for brake caliper

Genuine FG spare/option part. Content:1 piece

€41.30*

9540/02 Brake caliper right

Genuine FG spare/option part. Content:1 piece

€75.90*

9540/08 Pressure spring

Genuine FG spare/option part. Content:4 pieces

€7.90*

9540/17 Pressure spring

Genuine FG spare/option part. Content:1 piece

€7.60*

9540/26 Brake lever

Genuine FG spare/option part. Content:1 piece

€31.90*

P-R-M 1000-41/02 epoxy discs, slotted and with serrated edge for FG brake

PRM premium quality epoxy brake discs Suitable for the FG brake 9540 and 9541, replaces the original brake disc (9445/05).The 15 slot cuts enable better absorption of tire wear or dirt deposits!Dimensions: Outer diameter: 69 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake in FG Evo 2020Content:2 Pieces

€27.80*

9540/23 FG Piston sealing 12x4 mm

Genuine FG spare/option part. Suitable for hydraulic brakes with the order number 09540 and 09541.Contents:2 pieces

€21.90*

Customers also viewed

ST-AN23G SPEED TEC 0,25/0.50 mm Crankcase gasket AN - expansion sealing gasket

st_an23g Thickness: ST-AN23G/025 - 0,25 mm

Genuine Speed-Tec spare/option part. AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece

€4.40*

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set

Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

From €299.90*

Details